Table of Contents
How do I find out what brand my shower cartridge is?
Easiest of all is when it says the brand name right on the faucet face. But you should also look at the bottom of the faucet, on the handles or on the round plate behind the handles. If you find a brand name, go to the manufacturer’s website and call the contact number for assistance.
Are shower valve cartridges universal?
Cartridges aren’t interchangeable among different faucets, so if you decide you need a replacement, you need to know its part number so you can order it from your plumbing supplier or online. That number is usually available on the manufacturer’s website in the online version of the owner’s manual for your faucet.
Are all shower diverters the same?
There are three different types of shower diverters: Three-valve diverter – These are usually found when there are separate knobs for hot and cold water. Two-valve diverter – This type of diverter is usually found with a single-handle faucet.
How can I tell what brand my bathroom faucet is?
The most obvious and quickest solution is to look for a logo — the manufacturer’s symbol — that identifies its faucets. Each manufacturer has a distinctive logo that sometimes appears on the escutcheon — the plate beneath the faucet — the body of the faucet, the spout itself or somewhere on the handle.
Where do I find my faucet model number?
The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by “P/N.”Nov 2, 2019.
How do I know which Moen faucet cartridge I need?
The easiest way to find the Moen shower valve replacement cartridge you need is to know the series or model number of your Moen bathroom faucet. Exact information for these comes with any paperwork you have received when you first installed the original shower faucet (hopefully you saved it).
Are shower valves interchangeable?
Re: Are Tub/Shower Valves Interchangeable? You cannot interchange different manufacturer’s handles and spouts. In fact sometimes you cannot even interchange the same manufacturer’s trim between their own models.
Can you mix and match shower parts?
Shower Trim You can coordinate the same style and finish across all components, trim and fittings, as well as faucets and accessories, or you can mix and match.
Can you replace shower cartridge without turning off water?
When you disassemble the valve to repair it water will flow unless turned off. so the answer would be No the water needs to be turned off to repair the internals of a valve.
What are the different types of shower valves?
The two main varieties of shower valves depending on their functionality are Manual Mixer Valve and Thermostatically Controlled Valve. Most shower valves – other than the basic ones – come with the diverter option. You can flick the diverter switch to turn on the taps or permit water into the shower head.
How do you replace a shower spout?
Replacing a slip-on spout is easy: Just loosen the setscrew (usually with a hex wrench) and pull the spout off the copper pipe that protrudes from the wall. Twist the spout as you pull and be gentle so you don’t loosen any pipe connections inside the wall. Then slide on the new spout and tighten the setscrew.
What brand of faucet has red and blue circle?
The Delta faucet has a red/blue button.
What is the Moen faucet logo?
The Moen logo has been specially created for our brand. It features the waterdrop symbol, the Moen wordmark and our long-established tagline. The full-color logo is always preferred and should be used whenever possible.
How do I identify my american standard faucet?
Look on the base of the shower faucet spout on the front. American Standard shower faucets have the words “American Standard” printed on them. If your faucet is corroded or has lime scale, spray with a cleaning agent and wipe it with a towel to make the letters legible.
Where do I find my Delta faucet model number?
Where can I find my model number? The model number is on the packaging as well as the Installation instructions provided with your faucet.
How do I know what kind of faucet to buy?
Tips on Choosing a Faucet Looks aren’t everything. Most people choose a faucet based on looks alone. Spend enough but not too much. Watch the spout height and reach. Choose ceramic valves. Some finishes are tougher than others. Count the holes in your sink. A single handle is more convenient. Pull-down sprayers are better.
Where do I find my bathroom sink model number?
The model number is located on the underside of the sink, either molded into the sink material or stamped with ink. Typically the model number starts with a K, such as K-5942. In some cases, the model number is preceded by 97 or 87. For example, 975942 contains the model number 5942.
Is there a difference between Moen 1225 and 1225B?
The difference between the 1225 and the 1225B is with the packaging. The cartridges are exactly the same, the package in which the part is displayed is different.
Are all Moen cartridges the same?
There is absolutely NO difference between the Moen 1222 vs 1222B replacement cartridges. They are both the replacement part cartridge for the Posi Temp Moen shower valve. They are made from the same parts, the only difference is their packaging and model number.
Do all Moen faucets use the same cartridge?
Fits all Moen two-handle kitchen and lavatory faucets and two- and three-handle tub/shower faucets created prior to the launch of our Duralast® two-handle cartridges. The 1224 and Duralast cartridges are not interchangeable.
What is the difference between Moen 1222 and 1222B?
There is absolutely NO difference between the Moen 1222 vs 1222B replacement cartridges. They are both the replacement part cartridge for the Posi Temp Moen shower valve. They are made from the same parts, the only difference is their packaging and model number. The “B” in the 1222B model number stands for Bulk.
What is the difference between Moen cartridge 1224 and 1224b?
Answer: The 1224 is packaged in retail packaging sold at retail stores. The 1224b is not in pretty retail packaging but just the cartridge only in a bag. All double handle faucets from Moen use the same cartridge.
Is there a difference in shower valves?
What’s the difference between the two? A thermostatic valve can control what the water temperature actually is, while a pressure-balance shower valve can only control the ratio of how much hot water there is to cold water.
Are shower rough in valves universal?
Yes! Shower rough in valves without stops are by far the most common. They work absolutely as well in every way.
Are Delta and Moen shower valves compatible?
The cartridges are not interchangeable between different taps. So if you decide you need a replacement, make sure you know the part number so you can order it from your plumbing supplier or online. This number is usually available on the manufacturer’s website in the online version of the faucet’s instruction manual.
