Table of Contents
Look at the center of the trim plate behind the shower handle to find a brand name or manufacturer symbol. If you see a “K,” the faucet is a Kohler unit; an “M” signifies Moen. American Standard, Delta and Price Pfister typically print their entire name on the faucet itself.
How do I know what shower valve I have?
If you want to know how to identify the shower valve manufacturer, check behind the shower handle at the center of the trim plate for the manufacturer’s symbol or brand name. You will see one of the following shower faucet logos: K: the manufacturer is Kohler. M: the manufacturer is Moen.
What are the different brands of shower valves?
Shop by Brand: Kohler, Delta, Danze, Moen, Etc A. A and E Bath and Shower. ALFI brand. ANZZI. Air King. Alno Hardware. Amana Appliances. Amba.
How do I identify my bathroom faucet brand?
The most obvious and quickest solution is to look for a logo — the manufacturer’s symbol — that identifies its faucets. Each manufacturer has a distinctive logo that sometimes appears on the escutcheon — the plate beneath the faucet — the body of the faucet, the spout itself or somewhere on the handle.
Are shower valve cartridges universal?
Cartridges aren’t interchangeable among different faucets, so if you decide you need a replacement, you need to know its part number so you can order it from your plumbing supplier or online. That number is usually available on the manufacturer’s website in the online version of the owner’s manual for your faucet.
Are shower rough in valves universal?
Yes! Shower rough in valves without stops are by far the most common. They work absolutely as well in every way.
How do I identify my Moen shower valve?
Look closely at the handle buttons that were attached to the shower valve. Typically, “Moen” will be written in the middle of the “Hot” and “Cold” buttons. If you do not see this, the handle buttons have been replaced, or the “Hot/Cold” button is a lever (wall escutcheon).
Are Moen shower valves universal?
For many years Moen tub/shower valves have been manufactured using one of three valves. These valves are Standard, Posi-Temp and Moentrol. Although the look is similar, the trim is not necessarily interchangeable. Note:Posi-Temp trim and Moentrol trim are not interchangeable.
How do I identify my American standard shower valve?
Look on the base of the shower faucet spout on the front. American Standard shower faucets have the words “American Standard” printed on them. If your faucet is corroded or has lime scale, spray with a cleaning agent and wipe it with a towel to make the letters legible.
What faucet brand has a red and blue circle?
The Delta faucet has a red/blue button.
What is the difference between a shower valve and cartridge?
Conventional shower stem valves consist of a metal body concealed behind the shower stall’s wall. Cartridge shower faucet assemblies might consist of one or two handles. A single-handle cartridge faucet opens and closes water flow with an up and down motion, and regulates temperature with a left or right motion.
Are Delta shower valves universal?
Delta manufacturers their Shower Valves to be universal. This means you can simply remove the Trim Kit (which installs over the tile) and switch it out. This makes renovation work much faster and less expensive.
How much does it cost to replace a shower valve cartridge?
The cost to replace a shower cartridge is $100 to $350. A faucet cartridge costs $10 to $80, depending on the brand, material, and valve type. Plumbers charge $90 to $270 in labor to replace a shower cartridge.Shower cartridge replacement cost. National average cost $210 Average cost range $100 to $350.
Can you replace a shower valve with a different brand?
Showerhead threading is pretty much universal, you can swap one for most any other. Shower valve trim kits are the exact oppositeyou may have luck by staying within a certain manufacturer, but for the most part trying to swap a trim kit onto an existing valve may or may not work.
Can you replace a shower cartridge with a different brand?
You can’t use one company’s parts for another brand’s products. A stamped brand is a sure-fire shower valve cartridge identifier. The major faucet brands include Delta, Price Pfister, Danco, Kohler, American Standard and Peerless.
Are shower valves standard size?
Shower Valve Height A height of 28 inches, or 2 feet 4 inches, is standard for valves in bathtub shower units. For shower stalls, install the valve at the standard height of 48 inches, or 4 feet. Install faucets at the same height as the valve, equidistant from the valve.
How do you measure a shower valve stem?
It is easiest for us to identify your stem or handle needs by measuring your stem from the left where the washer is attached to the right where the handle fits on the knurled end (The Broached end). Broached ends are unique by manufacturer and is critical when identifying your stem or cartridge.
How do I identify my shower mixer?
The quickest solution of How to Identify the Shower Valve Manufacturer is to look for the manufacturer’s logo or name. A brand name or model can be found practically anywhere, so cleaning faucet handles, escutcheon, spout, decorative rings, etc., is helpful.
How do I know if I have a single handle shower valve?
Assess the faucet and determine how many handles it has. If it has two handles, it is a double-handle faucet, which means that the hot and cold water pipes each connect to separate handles. If it has one handle, it is a single-handle faucet. If the faucet has three handles, it is a rare three-handle model.
What’s the difference between Moen 1222 and 1222B?
There is absolutely NO difference between the Moen 1222 vs 1222B replacement cartridges. They are both the replacement part cartridge for the Posi Temp Moen shower valve. They are made from the same parts, the only difference is their packaging and model number. The “B” in the 1222B model number stands for Bulk.
Where is the Moen model number located?
Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).
How do I know what type of Moen valve I have?
If not the series number can be usually be found on the underside of the faucet or on the decorative escutcheon ring that goes around it. The second way to identify your Moen valve cartridge is to remove the old one. You will do this by first shutting off the hot and cold water feed to your shower.
