Table of Contents
Instructions for Hydro Dipping With Spray Paint Fill your bucket or tub full of water. Spray different colors of paint directly into the water. Use a stick to swirl the paint design just the way you want it before you dip your object. Dip your object into the paint design.
Can you hydro dip with just spray paint?
You can hydro dip any item with a nonporous surface — all you need are a few simple supplies! Step 1 – Using your 2x Rust-Oleum Spray Paint prime the item that you are going to Hydro Dip. Allow that to dry.
Do you need activator to hydro dip with spray paint?
Not Using an Activator (or using too much) If you’re using hydro graphics in order to hydro dip it’s important to note that you need to spray on some activator in order to thin out the paint and make it ready for dipping.
Can you hydro dip at home?
While there are many companies specializing in hydro dip art for large items (e.g. cars and sports equipment), it’s possible to do the process on your own and be creative. Purchase a home hydro dip kit online to apply a design of your choice, with minimal equipment or experience.
Can you hydro dip without primer?
Through a chemical interaction, the design becomes part of the object. Hydro dipping produces vivid colors, and every part of the object is covered with the pattern. You can also hydro dip wood, but you should exercise caution because the process may warp the wood if you do not use a sealer primer.
What is the activator for hydro dipping?
INK DRINK FILM ACTIVATOR. INK DRINK Hydrographic Film Activator is an easy to use film activator, compatible with most films on the market. Ink Drink maintains the richness and color vibrancy of your film and activates most films with a single pass (one coat).
What are the ingredients for hydro dipping?
This application method is decades old, and requires 5 basic ingredients: paint, hydrographic film, water, activator, and a protective clear coat.
Can you hydro dip with cold water?
What Happens if the Water Is Too Cold. One of the most common mistakes that people who are learning to do hydro dipping make is using water that is too cold. The film will not melt properly, so it may not conform to the item that you insert into the bath of water. The film may not stick properly to the item.
Do you have to clear coat after hydro dipping?
STEP 11: CLEAR COAT Clear coating is highly recommended for all hydrographically decorated parts. This helps to seal in the inks and allows for a cleaner finished product. When the dipped part is dry, apply the clear top coating (matte, semi-gloss or high gloss) to finish off your newly dipped hydrographic part.
Do you need a base coat for hydro dipping?
Choosing the right base coat color is very important in hydro dipping. So if you are wanting the design to look as intended and usually shown on the product page of where you are purchasing the film, then using a white base coat is usually the best choice unless it is specified that another color was used in the photo.
Can you use gloss spray paint for hydro dipping?
A gloss paint is ideal for hydro dipping. Rust-Oleum offers a wide selection of colors under high gloss, gloss, and semi-gloss finishes. If you are still looking for matte or satin finish, you can achieve that with your clear coat at the end.
How long does it take hydro dipping to dry?
Step 2: Paint the Base Coat Be sure to avoid any fingerprints for a smooth finish, and avoid spraying the concrete at school to keep everyone happy in the process. After a full base coat is applied, it will take about 24 hours for the paint to dry.
How expensive is hydro dipping?
Average Costs for Hydro Dipping The average cost for hydro dipping a wheel for a vehicle is roughly $150, and that pricing can vary by as much as 20% – 50%, depending on the type of activator, finish, and labor costs. Hydro dipping fees for guns typically range from $200 to $500, depending on the make and model.
Can u hydro dip glass?
These hydro dip glass bottles are colorful and unique and the paint technique is easy. You will never get the same paint finish twice with hydro dipping. I have photos, a tutorial, and a video showing the process. Definitely watch the video because the technique is so much easier to follow.
How do you make hydro dip without spray paint?
You can use specially formulated hydro dip paints that require no additions to the water (such as borax or cornstarch). These also don’t require thinning. Just drop, dip, and done! One choice is Marabu Easy Marble paints.
How do you hydro dip with acrylic paint without borax?
(If you don’t have Borax, you can also use liquid starch , or add a couple drops of dishwashing liquid to the water. The Borax, liquid starch or dishwashing liquid helps the color to adhere to the paper.) Use ramekins or plastic cups to water down acrylic paints – about a teaspoon of paint to a couple drops of water.
Does Hydro dip wear off?
Hydro dipping, also known as Immersion Printing, is a process of transferring colors and patterns onto various materials. The resulting look is 360-degrees of awesome. But does hydro dipping wear off? As long as the base paint remains stable, the hydrographics will remain intact.
Do you need to sand before Hydro dipping?
You still need to sand/scuff up (if needed or required) the item, prime it, apply a base coat and a clear coat to protect it. The only difference is that now you are adding one step after you apply your base coat and before applying your clear coat, and that’s the dipping process.
What tape is best for Hydro dipping?
SmartSolve Water Soluble Tape is revolutionary to the hydrographic industry and is used to mask off sections you want covered, making it the perfect solution for double-dipping.
Can you Hydro dip one color?
Spray a generous amount of one colour directly onto the water, you can do one big spray in the middle of the container or a few smaller sprays around the surface. Different spray locations will produce different patterns. Don’t overthink it though, the pattern will change quite a bit with each successive spray.
