Table of Contents
Connect a subwoofer through the subwoofer output (SUB OUT or SUBWOOFER) of a receiver using an LFE cable. Connect using an RCA cable if there isn’t an LFE subwoofer output or LFE input. If the subwoofer features spring clips, use the speaker output of the receiver to hook it all up.
How do you hook up a subwoofer to a stereo?
A subwoofer with speaker-level inputs is especially easy to connect to your older amplifier or receiver! To do so, just connect to the speaker outputs on the source unit using speaker wire and then to the matching inputs on the subwoofer. You can even power speakers from the amp or receiver at the same time.
How do you connect a subwoofer to a speaker?
Plug the Y-adapter into your computer’s audio output, then connect one leg of the Y-adapter to your computer speakers using a 3.5 mm cable like this one (most computer speakers include this cable), and connect the other leg of the Y-adapter to the subwoofer’s line inputs using a 3.5-mm–to–RCA cable like this one.
What wires do you need to hook up a subwoofer?
For the installation, you need: A 20 ft (6.1 m) power wire. A ground wire at least 3 ft (0.91 m) long. A 15 ft (4.6 m) RCA wire with both red and white connectors. A 15 ft (4.6 m) blue remote wire. Speaker wire, which can also be bought separately. A 50-amp in-line fuse and fuse holder.
What is the best way to hook up a subwoofer?
The optimal connection is to use the RCA (Phono) “sub” or “woofer” line out found on home theater receivers and pre-amps. Some subwoofers offer High Level inputs (speaker wire connections), they are there for use with a receiver or pre-amp without a sub RCA connection.
Should a subwoofer be on the floor?
To summarize the important points brought out in this article, we can say that subwoofers should not ideally be placed on the floor. However, the floor is the most convenient and safest place for it. Also, make sure that the subwoofer is not placed in any corner of the room which will cause the bass to sound boomy.
Can a subwoofer be used as a speaker?
Subwoofers are designed for low-frequency audio signal emissions including their structural design, included components, and available input or output ports. Subs cannot be used as speakers because they do not have the capacity to stream high-frequency audio signals required by other speakers.
Where do you connect a subwoofer?
The preferred method of connecting a subwoofer is through the subwoofer output (labeled SUB OUT or SUBWOOFER) of a receiver using an LFE (Low-Frequency Effects) cable. Almost all home theater receivers and processors and some stereo receivers have this type of subwoofer output.
How do you hook up a subwoofer without an amp?
Hooking Up a Subwoofer Without an Amplifier Start the installation process by removing your speaker from the mounting dock, giving access to its wiring. Mount your subwoofer in your preferred location. Next, reroute the stereo and power supply cables to the subwoofer and connect them.
How do you hook up a subwoofer without subs?
You can use your new subwoofer like a speaker if there is no preamp output on your receiver. To do it, run the speaker’s wire to connect the subwoofer to a receiver. Then click the front left and right speakers to the speaker terminals of the subwoofer.
Can you connect a subwoofer with speaker wire?
Although subwoofers are intended to be used with their own specifically designed wires, they are also able to operate using speaker wire.
How do you hook up a subwoofer to rear speakers?
Some (many) powered subs have high level inputs, so you can just tap into the rear speaker wires. If your car has a factory sub, use its speaker wire instead. If it doesn’t have high level inputs, you can use a basic line out converter that ties into the speaker wires and turns them into a rca output.
How do I connect my subwoofer to my computer?
Connect the sound cable with black connectors into the Rear Speaker Out port on the back of the computer. Plug the other end of the cable into the black port on the subwoofer, next to the green port. Connect the sound cable with orange connectors into the orange Center or Digital Out port on the back of the computer.
How do you bridge one subwoofer?
Wire the first sub by running a wire from the positive terminal on the amp to the positive bridge terminal on the sub. Wire the second subwoofer to the first subwoofer. If you wish to wire them in series, run a single wire from the negative terminal of the first sub to the positive terminal of the second sub.
Do subwoofers drain car battery?
Subwoofers Can Drain Car Battery Your car battery can get drained when it sends more power than it receives from an alternator. Generally, subwoofers and their amplifiers draw relatively more current than the normal car stereo system. That’s because more power is required to play bass frequencies by a subwoofer.
Do you need an amp for a sub?
A subwoofer is just a form of loudspeaker, they all need amplifiers, even if they appear not to, as some have the amplifier built into the enclosure. It is easy to identify the difference as a powered device has a connection for a power supply, as well as for the audio signal.
