Table of Contents
Perhaps the simplest way to hide your furnace and water heater is to add a sliding curtain as a divider. You will need to measure the wall height to determine proper curtain length, as well as the needed width. Be sure to give a few inches of clearance so the curtain doesn’t touch your heater.
How can I hide my hot water heater?
Ideas for Hiding a Hot Water Heater Add a Closet. If you have the space, you can hire a contractor to install drywall and a door. Create a Hot Water Cover or Cabinet. Creating a cabinet is a great option if you want something less permanent than a closet. Hang Curtains. Use a Room Divider or Screen.
Is it OK to enclose a water heater?
In most instances, a home’s water heater is placed in the basement. When the basement is finished so it can be used for another purpose, leaving the water heater in plain view can detract from the appearance of the room. You can enclose the water heater by building a wall around it and constructing a utility closet.
Can you put things on top of a water heater?
Store items that are prone to moisture damage such as books, papers, or magazines near the water heater. Don’t … Place any items that may block or obstruct your view of the water heater. If any view is hidden, you may not notice your water heater is leaking until it’s too late.
Do water heater blankets work?
Yes! Water heater blankets really work! They’re essentially an add-on feature that can be applied to any tank-style water heater to improve its energy efficiency. They’re also very easy to install.
Do hot water heaters need ventilation?
All water heaters that burn natural gas or liquid propane (LP) gas require a venting system. The process of burning of the gas is called combustion and it creates heat, exhaust gases (including highly poisonous carbon monoxide), and moisture.
How do you strap a water heater in a closet?
Wrap the heavy-gauge metal strapping 1-1/2 times around the tank. Start by placing the strapping at the back of the tank. Bring it to the front and then take it back to the wall. Secure this strapping to the wall studs or the wood block using several 1/4-inch x 3-inch or longer lag screws with oversized washers.
How much ventilation does a water heater need?
As a general rule, water heaters need 50 cubic feet of air per 1,000 BTUs/hr. For example, a water heater with an input of 40,000 BTUs/hr should be in a room (often the garage) with at least 2,000 cubic feet of air.
Can I store things around water heater?
Storing items in the water heater closet is extremely dangerous. The pilot light flame underneath the heater may set fire to the items stored near it. If the flame is accidentally extinguished, the fumes can create an extremely hazardous, highly combustible situation.
Can a water heater touch the wall?
water heater can sit against wall, but this can restrict air flow so keep stuff away from gas water heater.
Are heated blankets safe?
Even though modern heating blankets are considered generally safe, they should be used correctly. Suggestions for proper use include: When you’re not using your blanket, turn it off. Don’t use more than one electric blanket at a time.
Should you drain your water heater periodically?
It’s generally a good idea to drain your water heater at least once a year, according to both BobVila.com and The Family Handyman. Water heaters are typically a fairly low maintenance appliance, but remember to drain yours regularly. This may help keep it running efficiently and the hot water flowing.
Can I vent my water heater through the wall?
The air that is used for combustion will come from the water vent, this vent will either through the roof or from the outside of the wall. This means that only one single pipe is required to go through the roof or wall where the clean air is moved and the off-gasses will be vented.
Can a water heater be vented out a sidewall?
There are three types of venting and only a power vent is allowed to terminate at a sidewall. venting system (vent piping) and chimney by natural means. flame retention burners). a structure to the outside atmosphere in lieu of a chimney.
How do I hide my kitchen water heater?
Perhaps the simplest way to hide your furnace and water heater is to add a sliding curtain as a divider. You will need to measure the wall height to determine proper curtain length, as well as the needed width. Be sure to give a few inches of clearance so the curtain doesn’t touch your heater.
What states require strapped water heaters?
In addition to California and Alaska, areas of Nevada, Idaho, Wyoming, Montana, Oregon, Washington and Hawaii also fall under the Uniform Codes’ seismic zones 3 and 4, where water heaters are specifically required to be anchored.
How can I tell if my water heater is direct vent?
The difference in terms of venting direction: A direct vent unit directly vents out the exhaust gases vertically. Straight to your vertical vent or chimney. It’s also called the standard vent water heater. Meanwhile, a power vent unit vents out the exhaust gases horizontally. Plus, it needs extra power to do so.
Is a hot water heater a fire hazard?
Yes, a water heater can cause a fire. Proper maintenance and safety precautions can drastically decrease the risk of a fire. Don’t store flammable materials or liquids near a gas water heater.
