Table of Contents
How do I hide my furnace and hot water heater?
Perhaps the simplest way to hide your furnace and water heater is to add a sliding curtain as a divider. You will need to measure the wall height to determine proper curtain length, as well as the needed width. Be sure to give a few inches of clearance so the curtain doesn’t touch your heater.
How do you hide a hot water heater in the laundry room?
Ideas for Hiding a Hot Water Heater Add a Closet. If you have the space, you can hire a contractor to install drywall and a door. Create a Hot Water Cover or Cabinet. Creating a cabinet is a great option if you want something less permanent than a closet. Hang Curtains. Use a Room Divider or Screen.
Can you enclose a furnace and water heater?
If you are finishing your basement and building walls, incorporate a small area to enclose the furnace, AC, and or water heater. These louvered doors provide great ventilation. Another option is to create a set of built-in shelves in the door that don’t even look like a closet.
Can a furnace be in a laundry room?
You need to be sure there is sufficient air exchange. Gas exhaust needs to be vented to the outside and fresh air must replace it. An older house may be able to exchange the air but a new airtight house would need an exchanger. A clothes dryer dumps inside air to the outside via the fan.
How much clearance is needed around a furnace?
As a general recommendation, your heater should be 30 inches away from furnace room walls on all sides. This allows our service experts to comfortably replace it. You also need to check the space has enough airflow and ventilation, especially if you have an aging furnace with a metal flue.
Can you put things on top of a water heater?
Store items that are prone to moisture damage such as books, papers, or magazines near the water heater. Don’t … Place any items that may block or obstruct your view of the water heater. If any view is hidden, you may not notice your water heater is leaking until it’s too late.
Is it safe to enclose a water heater?
The short answer to whether a water heater can be enclosed is “Yes,” but there are some important things to consider when placing a hot water heater in an enclosed area, whether the unit is gas or electric. Any hot water heater must be installed in such a way as to prevent spills and allow easy access to controls.
How do you camouflage a water tank?
You can inexpensively purchase panels like bamboo fencing or similar, or create cover with horizontal slats or lattices for a nicer crisscross effect. These panels are placed in front of your tank, to help conceal from view. If using lattices or slats, you can obviously paint the material to match your garden or house.
Can I box in my furnace?
A furnace can be installed various places in a house — in a basement, an attic, a garage, a ground-floor utility room or outside the walls. Furnaces in basements or garages often are enclosed in cabinets or closets to block noise from the unit and protect it from accidental bumps.
Is it safe to enclose a furnace?
The answer is yes, of course you can enclose your furnace. Similar to the other reason, this has to be handled carefully, and within strict specifications to be safe and effective.
Can I build a wall around my furnace?
Moving the furnace can be expensive and impractical — if not impossible — so your best choice is to conceal it from view. This can be done by placing walls around the appliance and hanging a furnace room door to create a dedicated furnace room.
Does the water heater affect the dryer?
When hot water heaters are in the same room with dryers, over time lent from the dryers thats just floating in the air can collect on the air intake screen and eventually blocks the air flow to the heater. In turn, the heater will shut itself off as a safety feature.
Can you put a washer and dryer near a furnace?
3. Safety first. Never leave any combustibles in the furnace room. If your furnace room or area doubles as a laundry space, don’t hang laundry or a clothesline from your equipment – it’s a major fire hazard and reduces airflow.
Can you put washer and dryer next to furnace?
The washer doesn’t matter, but if the dryer, furnace, and water heater all turn on at the same time, they each need air input.
How much space is required around a water heater?
Water heaters must be surrounded by a certain amount of clearance, or air space, to function properly and safely. A clearance area of 12 inches is required on all sides of a hot water heater. A certain amount of airflow is also required for proper combustion and ventilation.
Does a furnace need ventilation?
Yes, a furnace needs to be vented. Just as you would not want your car’s exhaust in your home, you also do not want your furnace’s exhaust in your home. A furnace vent allows for any gases and exhaust created by combustion to be removed from the home.
Can you lean stuff against water heater?
“Is it okay to store things like brooms and mops in the water heater closet?” If it is an electric hot water heater, yes. If it is gas fired, no. The mop and broom themselves are probably not an issue, but they can pick up easily lofted flammable materials.
