Table of Contents
How to Hide Ducts in a Basement Paint Your Duct Work. The fastest and least expensive way to cover your duct work is to paint it the same color as your ceiling. Use Soffits or Tray Ceilings. Create a Drop Ceiling. Opt for Flattened Ducts.
How do you hide exposed ductwork?
How to Hide That Awful Ductwork! Create a tray ceiling. Drop the ceiling in one area to create intimacy. Create faux rafters. Use unique soffits when framing out ductwork. Incorporate ceiling framing with wall framing. When you can’t beat ’em – embrace them!.
Can you attach drywall to ductwork?
Drywalls cannot touch ductwork. But, you can install drywall directly against the ductwork with a 6-inch gap. Make sure to give a 6-inch gap between drywall and ductwork.
How do you dress up ductwork?
How to Decorate Furnace Ductwork Enclose Them. If the ducts run along the edge of the ceiling, adjacent to the wall, consider enclosing them in a soffit or bulkhead. Paint Them. Galvanized metal ducts can be painted using the same methods used to paint other metals, such as pipes or cars. Work with Them. Make Them Magnetic.
How do you make exposed ductwork look good?
If you don’t want to go through the hassle of covering up your exposed pipes and ducts, but you also don’t want them to draw too much attention, simply paint them the same color as the ceiling or walls that surround them. Painted in a unifying hue, they will blend in and become part of a cohesive background palette.
Can you paint ductwork in basement?
Furnace duct work, whether it is in a basement or elsewhere in a house, can be unsightly. Furnace ducts can be painted, but using the correct kind of paint is necessary for the best results.
How do you insulate a basement ceiling with ductwork?
When insulating HVAC ductwork, use a foil, faced fiberglass insulation with an R-6 or higher R-value. Use the type of metallic foil duct tape recommended by the insulation manufacturer to seal and hold the insulation in place. Make sure the foil surface of the insulation is free of dust before applying the tape.
How can I hide the pipes in my basement ceiling?
How to Conceal Low Pipes in a Basement Paint to Match Ceiling. If you are looking for an easy, budget-friendly way to hide low pipes in your basement, paint is your best option. Fabric. Like painting, fabric offers a quick, inexpensive way to conceal pipes in your basement ceiling. Faux Wood Beams. Suspended Ceiling.
Can Romex touch ductwork?
As long as there are no sharp edges in the chase that might physically damage the cable, there’s no code violation if Romex touches metal hvac supply or return ducts. On the other hand, it’s common practice to run Romex perpendicularly across a panned stud cavity or joist bay used as a cold air return duct.
How hot does ductwork get?
Once the combustion occurs and the air gets heated up, it can have a temperature between 140 F and 170 F. That is very hot and you certainly wouldn’t want such air to fill up your rooms. Thankfully, once distributed into the house, the air starts quickly cooling down.
Can you move ductwork in basement?
Ductwork can be a major eyesore, but moving it will cause unnecessary stress — and add more time and money to your basement project. Solution: Before you try to relocate it, consider how you can frame around it and use it as a design element, perhaps creating a soffit or a tray ceiling.
Where should vents be placed in a basement?
Cold air return ducts must be installed on the opposite side of the heating ducts in order to be safe. If you don’t have return ducts near the floor, you’ll get cold pockets of stagnant air down low.
Can you raise ductwork in basement?
Don’t let low-hanging ductwork scuttle your plans for a basement remodel. You can reroute it or split it into more but smaller ducts. But the least disruptive and easiest way is to replace the low ducts with new ducts that are flatter but wider. In most cases, you can gain several inches of headroom.
Can you put contact paper on ductwork?
Contact Paper Measure and mark the paper on its backing with a permanent marker. Use a utility knife to cut it. Peel back one corner of the paper backing and stick it carefully to the corner of the ductwork. Slowly peel off more of the paper backing as you smooth the contact paper onto the ductwork.
Does exposed ductwork need to be insulated?
A: Depending on the climate and the ducts’ location, it may not be necessary to insulate them. The ducts are exposed to the same cold, heat and humidity that exist on the outside. Insulating them is essential in colder climates, optional in milder ones and necessary in humid climates to prevent condensation.
Is ductwork magnetic?
Yes, the vent is metal. This so-called magnetic strip falls right off.
Is exposed ductwork cheaper?
Installation. A good exposed duct installation should cost a little more than one that will never be seen above a ceiling. It doesn’t have to cost a lot more, but all of those special design features, shipping strategies and backup plans cost money.
Do you need special paint for ductwork?
Things You’ll Need It’s best to use latex paint, and because ducts are located in out-of-the-way places, you can usually get away with using a paintbrush. If the ducts are prominent, though, you may want to spray paint them.
What is paint grip ductwork?
“Paint grip” is galvanized steel that is processed through a phosphate bath. This provides a corrosion inhibiting, crystalline zinc phosphate, micro-porous surface that promotes adhesion of top coatings. It has a phosphatized or bonderized coating over the zinc.
Can you paint the inside of heating ducts?
Interior metal heating ducts are subjected to constant changes in both humidity and temperature. Repainting ducts with the correct paint will remove rust and eliminate expensive repairs.
