Table of Contents
How do you disguise support columns?
While a large structure in the middle of the room may be hard to hide, painting the column the same color as the rest of the room, using mirrors to cover your column, or using your column to create the framework for custom shelving can disguise your column.
How do you cover a metal pole with wood?
Step 1: Cut Boards to Length. Step 2: Cut and Install Bottom Blocking. Step 3: Cut and Install Top Blocking. Step 4: Nail On the 1x6s. Step 5: Add Decorative Trim. Step 6: Seal Gaps. Step 7: Prep and Paint.
How do you hide support beams?
A drywall cover makes the beam virtually disappear into the ceiling, making it look more like a soffit than a beam. Secure the drywall directly to the beam, tape and cover all the nails and corners. Add texture with drywall mud to match the ceilings and walls. When dry, paint the beam to match the ceilings and walls.
What is pole wrap used for?
While not a structured split column, Pole-Wrap is a pliable sheet of decorative wood that covers your exiting support post or columns and is quick and easy to sustainably. Simply cut to fit and adhere with construction adhesive.
What is the clear cover for foundation slab and beams?
What Is the Clear Cover for Foundation Slab and Beams? The size of clear cover 40mm is apply for column, 25mm for beam, 15 to 20 mm for slab, 15mm for staircase and 40 to 50mm for foundation.
How can I hide my basement walls?
Attach wood furring strips, Z-shape channels, or 2×4 studs to flat, dry masonry walls, then add insulation and cover the strips or studs with drywall. Such treatments give basement walls a smooth, even surface that accepts finish materials such as paint, wallpaper, or paneling.
How do you make a support beam look nice?
Here are some ideas to decorate your support beam to make it look nice in your interior design: Decorating Support Beam with Cantilevered Light and Tight Rope Tied Around. Setting a Kitchen Island Around the Decorative Support Beam. Decorating Support Beam with Arched Design Ideas on an Elevated Level.
What is a column wrap?
A column cover or a column wrap is an architectural column that goes around a structural support (wood post, I-beam, lally column, etc.) in order to conceal the support, wiring, or anything else for that matter. Column covers are purely aesthetic or decorative and are not load-bearing or structural.
How do you know if a pole is load-bearing?
Look for seams that run lengthwise on opposite sides of the column shaft. Oftentimes, a seemingly decorative post or column is “split” in half in order to wrap and fasten the two halves around a structural or load-bearing post.
Can you remove a basement support pole?
In general, these posts’ material is steel or wood, and you can find them underneath beams or floor joists. You can only remove the post they support above in case you install a new and sturdier beam.
Can I move the poles in my basement?
The steel poles under i-beams in a basement are called “lolly columns”. They can sometimes be moved, but you need a professional structural engineer to decide for sure. They can usually only be moved a couple of feet one way or the other.
Can you remove a load bearing post?
Planning is key, as it’ll help you determine how much of a load-bearing wall can easily be removed. After all, in most homes you can remove as much as you wish of a load-bearing wall, but it has a lot to do with what’s inside the wall, and how you plan to redistribute the weight.
How do you cover basement concrete walls?
The most common way to cover concrete walls in a basement is drywall, a.k.a. sheetrock. Drywall comes in panels panels made from calcium sulfate dihydrate or “gypsum.” Panels come in different thicknesses and sizes, the most common being 4′ x 8′ x 1/2″ thick.
What can I use for basement walls instead of drywall?
Finishing Basement Walls Without Drywall: Options and Paint. Basement Panels. Wood Fiberboard. Fabric. Vinyl and Wallpaper. Stone Veneer. Pargeting. Exposed Brick.
How do you cover metal posts?
Step 1: Cut plywood boards. Our metal columns were 21″ x 1″ x 8′. Step 2: Attach a foundation to the top and bottom of the columns. Step 3: Attach the plywood boards. Step 4: Attach 1″ x 5″ boards to the side. Step 5: Attach moldings. Step 6: Caulk and fill in with wood putty. Step 7: Paint.
How do you cover an existing beam with wood?
Flooring can be applied directly to the beam, just by laying enough pieces to cover it. Spread wood glue on the back of each piece, then tack it in place with finishing nails. Cut pieces as necessary to cover the whole beam.
How do you hide structural columns outside?
If you’re stuck with structural columns in the middle of what could be an open-plan living space, here are some great ways to disguise them Greenery. Tile. Brick. Natural stone. Slats. Craftsman. Wood. Carved wood.
What is the diameter of a basement support pole?
The three standard column diameters for residential basements are 3 in., 3.5 in. and 4 in. Always choose your Pole-Wrap models based on this initial circumference measurement used to find your column diameter.
