Table of Contents
Can you shorten a shower curtain?
If you want to cut down a shower curtain to fit a narrower shower stall, you may actually have to add fabric to it; shower stall sizes vary, with typical lengths measuring 84 or 96 inches. A simple way to customize a re-purposed curtain is to add a panel of contrasting fabric at the bottom.
How do you fix a shower curtain that is too long?
Use String Or Ribbon Instead of Shower Rings and Adjust the Length to Fit. If you have some extra ribbon or string sitting around, you can use them to lengthen your shower curtain. Using ribbons or strings will make it easy to get the exact length you want.
How do you hem a fabric shower curtain?
Apply iron-on hem tape (I like Heat N Bond UltraBond Iron-on Adhesive) to one side of each fabric panel with the 7/8″ seam allowance. Remove the paper backing from the hem tape, fold the hem over, and iron. Apply hem tape to the bottom of the shower curtain panel and remove the paper backing.
Can you sew shower curtain?
We’ve sewn up a few shower curtains over the years and thought you might enjoy a tutorial so you can sew your own! Shower curtains are easy to switch out and they’re usually the main decor in the bathroom. Why not have a few on hand to change up your decor (in one of the most-used rooms in the house) every season!Aug 19, 2019.
How do you cut a shower curtain in half?
Just lay the curtain out flat and fold it in half vertically. Pin the fold in place with dressmaker’s pins, or iron it lightly to create a crease. Cut along the fold carefully to split the curtain into two even panels.
Can you hem a shower curtain liner?
Make sure that the liner is completely free of wrinkles or bunching. Otherwise, the cut may be uneven. With a pair of sharp scissors, slowly cut the liner. Move in small, deliberate motions across the liner so that it doesn’t end up with a ragged edge.
Can you cut the bottom of a shower curtain liner?
Where the shower liner hits the tub and where it ripples, as a result of being too wide, are breeding grounds for mold and mildew. One simple solution: trim a few inches from the bottom and sides so it fits the tub perfectly without bunching.
Can I iron a fabric shower curtain?
You can iron a shower curtain without much trouble so long as it is an exterior, decorative shower curtain and not your plastic liner. A wrinkle-free shower curtain can make a bathroom appear more inviting. Set your iron on a medium or warm setting. Do not turn on any steam settings.
What is the length of a shower curtain?
The standard shower curtain size is 72 x 72 inches. Standard shower curtain length extends to the floor and covers the tub. Of course, if you have a custom shower, standard curtain panel sizes may not be the right fit for your shower.
What fabric is shower curtains made from?
FABRICATION : Fabric curtains typically come in polyester, microfiber, or a cotton blend. The fabric you choose for your shower curtain has a major impact on the overall design of your bathroom. However, some of the most common fabrics to choose from are vinyl or cotton.
How many yards of fabric does it take to make a shower curtain?
In most prints or solid colors, a shower curtain will take 5 yards of 45”- or 54”-wide fabric pieced together to make the needed width. If the print has a large repeat, more fabric will be needed to match the design, so check the repeat distance before purchasing yardage.
Should I cut my curtains?
Nearly any curtain design still looks good if you shorten it from the bottom instead of the top. Avoid cutting by folding up the bottom to the desired curtain length and pressing it with a hot iron to create a crisp edge.
Can you put a shower curtain in a shower stall?
Regular shower curtains can be can fit a shower stall just fine, but the fabric will be a bit bunched on the ends because of its larger size. There are different sizes of shower curtains available on the market so you can always find the one that suits the measurement of your shower stall.
How do you cut a shower liner?
If you have to remove a considerable length of liner, you can use a stanley knife with a straight edge to cut/mark the liner at the correct place and bend it at the cut/mark to break the excess off at that point. Redress the cut edge with sandpaper.
Can you shorten curtains without sewing?
It’s not necessary to have them professionally altered as there are inexpensive, no-sew hemming options that you can do yourself. Shortening your drapes can be done with iron-on fusible tape or fabric glue.
How many inches should a curtain hem be?
Standard floor-length curtains should have a three to four-inch hem, plus another three to four inches for the double fold. Your curtains should then be six to eight inches longer than where you place your pins.
Does hem tape work on curtains?
Hemming tape works especially well for lightweight curtains with a narrow hem to fold up. Take the time to measure the preferred length from the top of the curtain to the bottom edge to help you calculate the new hem depth.
