Table of Contents
How do you hang a valance without a rod?
How to Hang Your Curtains Without Using a Rod 1 – Hooks. There are a number of hooks you can use to hang your curtains. 2 – Drawer Pulls. 3 – Rope. 4 – Tree Branches. 5 – Sports Equipment. 6 – Nails. 7 – Copper Pipes. 8 – Upholstery Tacks.
How high above a window should you hang a valance?
For most windows, a valance should cover about 2 to 6 inches of the top of the window and window frame (this is called the window overlap), with the rest of the valance covering the wall above the window. If there is not enough room to do this, then the valance should be hung immediately under the ceiling.
How do you hang curtains with a waterfall valance?
What can I use instead of a curtain rod?
Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.
How do you hang curtains without a rod or hook?
5 Creative Ways to Hang Curtains Without Rods upholstery tacks. tension cables. hook-eye screws and drapery pins. staples and furring strips.
What is the height of a valance?
Just keep in mind that valances are normally 15-25 inches (38-63cm) high and placing the valance higher may allow the top part of the window casing to show underneath the valance when the drapery panels are opened. 3. If you like a puddled drapery bottom, add 4 inches (10cm) to the total of the height measurements.
How far above the window should you hang curtains?
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
What length should a window valance be?
The length of the valance should be 1/4 the window height plus one inch. Using these measurements, cut a rectangle from your fabric and lining. Place the fabric and lining right sides together.
Are waterfall valances out of style?
If when you think of valances, you imagine droopy valances without form made of some cheap polyester jacquard, then they definitely are dated and most definitely out of style. Just like any product, valances are still used quite frequently by professional interior designers, even in the most modern of homes.
What Is a Waterfall valance?
A waterfall valance is a special window treatment that drapes down to resemble a waterfall and can give your windows a refined appearance.
How do you hang a box pleat valance?
Fold the entire panel in half with right sides facing, and sew in both side seams. Turn it right side out and iron the valance flat. Pin the pleats in place, making sure to measure at both the top and the bottom of the valance so they hang perfectly straight.
How do you hang curtains without putting holes in the wall?
Put your drill and spackle aside, and let’s get started. Use 3M Command Hooks. Try Kwik-Hang Curtain Rod Brackets. Use Tension Rod Curtains. Get Creative With Coat Hooks. Try Magnetic Curtain Rods on Metal Doors. The #1 Way to Hang Curtains Without Wall Damage.
What are the different ways to hang curtains?
Rod pocket, eyelet and tab top are amongst the most popular ways to hang curtains. Rod Pocket. The most basic heading is the rod pocket (also known as pole pocket) style. Curtain rings. Using curtain rings is a popular choice. Eyelet. Tab Top. Tie Top. Pencil pleat. Goblet pleat. Pinch pleat.
How do you hang curtains with string?
Rope softens the lines around window frames and relaxes the feel of a room. Create tension in the rope by tying the ends directly to the curtain rod brackets. You can also use curtain tieback hooks to secure the rope further down the wall. Avoid hanging heavy drapery when using rope in place of a curtain rod.
How deep should a curtain valance be?
Another rule of thumb used by decorators is that the window valance depth should be 1/4 of the overall window height, plus 1 inch. A 60-inch tall window, then, would call for a 16-inch deep valance, while a 48-inch window calls for a valance about 13 inches deep.
How wide should a valance be for a 36 inch window?
To determine the width of a valance for a 36-inch window, the Window Treatment Expert website suggests adding 2 to 4 inches on each side, adding less for narrower windows and more for wider windows. For a 36-inch window, this measurement would provide you with a valance that has a width of 40 to 44 inches.
How far should the curtain rod extend beyond the window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How high do you hang 84 inch curtains?
The length of the curtain dictates the height of the rod. If you buy 84-inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings. This lets the hem of the curtains brush the floor.
Should curtains touch the floor or window sill?
In formal or dressy rooms, curtains should just touch the floor. A romantic room deserves elegant, extra-long curtains that pool or puddle on the floor. Curtains to the sill, or to the bottom of the window trim (called the apron), look great and are practical in a kitchen.
How wide should a window cornice be?
The width of the cornice box depends on the width of the window; typically your cornice box should be 1 to 2 inches wider than either the window or the curtain rod.
How much fabric do I need for a window valance?
The obvious answer is that it depends, but you should expect to need somewhere between 1-1/2 to 5 yards of face fabric for a standard 36- to 40-inch window. For double-wide windows (about 70 to 80 inches wide), about 2-1/2 to 8 yards of face fabric is a realistic estimate.
