Table of Contents
Use nails, thumb tacks, or clear wall hooks to hang the lights up. Match the color of the nail or thumb tack to the color of the wire. Drive the nails or thumb tacks between the twisted wires. Never drive them through the wires.
How do you hang up twinkle lights?
Luckily there are a number of alternative ways to hang or display fairy lights. Drawing Pins. Blu-Tack. Wrapping around household objects. Wire Suckers. Damage-free Adhesive Hooks.
How do you hang LED twinkle lights?
How to Hang Outdoor String Lights Step 1: Measure & Prep. The first thing to do is measure for both your string lights and the cable guide wire you need for spanning across any open spaces. Step 2: Mount Screw Hooks. Step 3: Connect & Tighten Cable. Step 4: Attach Your String Lights. Step 5: Sit Back and Enjoy!.
How do you hang twinkle lights on a ceiling?
Start from the hook closest to your outlet. Run the lights across your ceiling to the other side across the length of your ceiling. When you reach a hook, pull the lights tight and coil the string once around the hook. Continue working in a zig-zag pattern until you’ve covered your entire ceiling.
How do you hang fairy lights on a brick wall?
Start placing the top of the clip on the top of the brick. Next press down until the springs on the bottom of the clip snaps into place along the bottom of the brick. You can then hang your lights along the hooks for a secure solution. Removing the clips is just as easy and won’t cause any damage.
How do you attach fairy lights to a wall outside?
Using Hot Glue on Brick, Concrete, and Stucco. Plug in a hot glue gun and let it heat up. Select a large glue gun for hanging the lights, and pick glue that’s safe for outdoor use. Load the glue gun and plug it in with an extension cord so you can walk around with the glue.
Can you use tape to hang fairy lights?
What kind of tape do you use to hang fairy lights? Transparent tape is the best choice. There are a number of styles and sizes of adhesive tape, but the best tape for hanging rope and fairy lights is the transparent double-sided tape.
How do you hang lights on ceiling without nails?
How to hang lights in a room without nails Use adhesive clips. With damage-free adhesive hooks or clips, you can deck the halls without nails or stress. Drape on furniture. Wrap around banisters. Use brick and brick clips. From a curtain rod. Transparent tape. Wrap around household objects. Staples.
How do you hang rope lights on a ceiling?
How to Hang Rope Lights in 7 Simple Steps Decide Where You Want to Hang Your Lights. Figure Out How Much Rope Lighting You Need. Install Plastic Cable Clips. Place the Rope Inside the Clips. Nail Down Your Cable Clips. Plug in Your Rope Lights. Turn on Your Lights and Enjoy!.
How do you hang fairy lights under pergola?
Attach string lights to the hoop with zip ties every 10 inches (25 cm). Start at the end without the plug and wrap a zip tie around the hoop. Continue to wrap the strings of lights around the hoop, securing them as you go. Use as many lights as you need to illuminate the area thoroughly.
How do you hang string lights indoors?
Hanging String Lights Indoors One secure option that works for most walls is to use a hammer and nails. Leave a part of the nail protruding from the wall and drape the string lights over the nail. If you are hanging fairy lights, a thumbtack should be enough to support the weight of the lights.
How do you hang fairy lights without damaging walls?
Adhesive hooks like Command™ are perfect for hanging your Christmas lights with as they don’t cause any damage after removing them when the festivities are over. Often used for hanging artwork, which means they can withstand a lot of weight – so you can use longer strings of fairy lights without worry.
How do you hang fairy lights in a bedroom?
Hanging fairy lights without nails is a relatively painless process. Buy damage-free hanging hooks from the brand of your choice. Make sure your walls are clean and dry. Adhere the hooks to the walls. Wrap or lay the fairy lights on the hook.
How do you hang outdoor lights on concrete?
If you prefer, put concrete around the post almost to the top of the container. Let it dry and cure. Then sit small, potted plants on top of the concrete. Use a ladder to drape the lights over the hooks at the top of the posts or attach them to the hooks with twist ties.
How do you hang patio lights on a patio?
Step 1: Select Anchor Points. Lay string lights around the perimeter of your deck. Step 2: Install Screw Eyes. Predrill holes into the wood structural supports in your marked locations. Step 3: Attach String Lights with Carabiners. Step 4: Install Light Bulbs. Step 5: Attach String Lights to Power.
How do you hang patio lights in an apartment?
One of the ways to hang outdoor patio lights without nails is using adhesive hooks or gutter hooks. Alternatively, you can tape or staple them to your wall. You can also hang them on trees, bushes, posts, potted plants, and your fence. Another way to brighten up your patio is by using lanterns.
Do Command strips stick to brick?
Surfaces. To what surfaces will Command™ Products stick? Painted, stained or varnished wood, glass, tile, painted cinder block, plaster, metal, and painted wallboard. The Outdoor Product line is not recommended for use on rough surfaces, such as cement board, brick or rough-sawn wood.
