Table of Contents
Use nails, thumb tacks, or clear wall hooks to hang the lights up. Match the color of the nail or thumb tack to the color of the wire. Drive the nails or thumb tacks between the twisted wires. Never drive them through the wires.
How do you attach fairy lights to a wall without nails?
Luckily there are a number of alternative ways to hang or display fairy lights. Drawing Pins. Blu-Tack. Wrapping around household objects. Wire Suckers. Damage-free Adhesive Hooks.
What kind of hooks do you use to hang string lights?
Screw the Screw Eye hooks into place. We opted to put up screw hooks for the mounting points to fasten the lights into place every 4 to 5 bulbs. Our home sits up fairly high and gets A LOT of strong wind gusts. So, I was concerned the bulbs could potentially break if they were not secured well.
What can I use to hang string lights on my house?
Use a ladder to drape the lights over the hooks at the top of the posts or attach them to the hooks with twist ties. If needed, use an outdoor extension cord to plug the string lights into a power source.
Can you use tape to hang fairy lights?
What kind of tape do you use to hang fairy lights? Transparent tape is the best choice. There are a number of styles and sizes of adhesive tape, but the best tape for hanging rope and fairy lights is the transparent double-sided tape.
Can you hang LED lights with Command hooks?
Can I use Command Clear Hooks to hang string lights? Yes, use one light clip for every two feet of lights. Command Brand also offers Outdoor light clips, so use the product that applies to your project location.
What is AQ hanger?
QH-12 (12 PACK) – $10.99 USD. The Hangman Christmas Light Hangers (Q-Hangers) are a patented all year outdoor stainless steel wire holder. A simple way to hang holiday lights, bird feeders, bird houses, wind chimes, etc. Installs easily and is wind and weather resistant with a lifetime warranty. These are made to last.
How do you hang lights without nails?
However, is there any way to hang them up without putting nails into the wall? One of the ways to hang outdoor patio lights without nails is using adhesive hooks or gutter hooks. Alternatively, you can tape or staple them to your wall. You can also hang them on trees, bushes, posts, potted plants, and your fence.
How far apart should string lights be?
The average spacing between sockets on a patio light string is at least 12 inches. However, spacing can range from 12 inches to 3 feet wide.
How do you hang strings on stucco without drilling?
You can do this indoors by plugging the lights into an electric outlet. Replace bulbs as needed, then unplug the lights and take them outside. Arrange the lights along the line of clips, placing the cord in each clip as you go. Plug the light string into an outdoor outlet, using an extension cord if needed.
How do you stick LED lights to wall without adhesive?
Other options to stick your LED strip without adhesives are the following: Mounting clips. These are clips specifically made for mounting LED strips. Mounting putty. This is a great option if you don’t want any adhesive on your wall. Cable ties. Staple.
Will command strips hold LED lights?
Be careful not to oversaturate and water damage your LEDs. From here, you can select a new adhesive. This could be more W3 tape, extra-strong double-sided tape, Command strips, glue dots, or adhesive clips. The possibilities are endless.
What’s better than command strips?
In short, the most popular alternatives to Command strips include VELCRO strips, adhesive hooks, Ook Hardwall Hangers, adhesive putty, magnetic strips, and ladder shelving.
Is it safe to tape string lights?
Why You Should Avoid Tape On Christmas Lights However, it’s a temporary solution to a season-long concern. Depending on your lighting design and the type of lights you chose, the tape might not hold them up for long. Tape could also ruin surfaces and your decorations.
Can you tape string lights to the wall?
Don’t tape the lights themselves to the walls, only the strands of wires. Don’t use lights with fraying or exposed wires, as these are a fire hazard.
What tape is safe for walls?
Scotch wall safe tape or any other kind of material that has a medium-to-light adhesive strength is the safest choice for painted wall surfaces. A thin, two-sided product that comes off easily without leaving a stain is the best option.
How do you hang a rope on the wall without nails?
How to Hang Rope Lights on the Wall Without Nails Transparent Tape. Double-sided tape works the best when you have to hang rope lights indoors. Gorilla Mounting Tape. Gorilla mounting tape is another type of see-through tape that is very strong and can easily hold rope lights. Adhesive clips and hooks. Brick Clips. Hot Gun.
Will command strips stick to brick?
Surfaces. To what surfaces will Command™ Products stick? Painted, stained or varnished wood, glass, tile, painted cinder block, plaster, metal, and painted wallboard. The Outdoor Product line is not recommended for use on rough surfaces, such as cement board, brick or rough-sawn wood.
How do you hang lights on a brick wall without drilling?
A: Devices called brick clips or brick hangers allow people to hang pictures, mirrors and other objects on walls without drilling into the brick. Two examples are Brick Clips by a company called Tuopu (10 for $14.99 on Amazon) and OOK Brick Hangers (two for $2.48 at Home Depot).
How do you hang string lights in a dorm room?
Simply hang two pieces of sturdy string to the walls or ceiling of your dorm using Command hooks and drape two long pieces of sheer fabric over the string; cinch the fabric at each of the four corners. Then, simply drape lights over the top. So easy!Apr 24, 2019.
