Table of Contents
Here are five ways to hang curtains without damaging walls or window frames: Use 3M Command Hooks. Try Kwik-Hang Curtain Rod Brackets. Use Tension Rods. Get Creative With Coat Hooks. Try Magnetic Rods on Metal Doors.
How can I hang curtains without putting holes in the wall?
Renter-Friendly Window Treatments That Don’t Damage Walls Use Temporary Command Hooks. Hang Curtains With Tension Rods. Order Custom Compression Shades. Make a Faux Roman Shade. Buy Twist & Fit Curtain Rods. Suspend Curtain Rods from the Ceiling.
Can you hang curtain rods without drilling holes?
Dowels and Sticky Hooks A slim wooden dowel is a beautifully understated way to hang curtains. And the beauty of using a sticky hook instead of drilling holes in the wall is that if you decide the curtains look too low or too high, you can move the rod and hooks without any damage.
Can you hang curtains with Command Strips?
And the answer is brilliantly simple. Look no further than 3M Command hooks. Yes, the same hooks you use for hanging pictures, keys, mugs, and plants. An easy hack turns them into quick DIY supports for your curtain rod and that splash of color, sun shade, or bit of privacy you’ve been searching for.
How do you hang curtains outside without drilling holes?
If you want to hang outdoor curtains without drilling holes, tension rods are the way to go. This method is especially helpful for patios with columns made of stone or brick. You can also use ceiling-mounted hardware for brick or stone patio walls.
What can I use in place of a curtain rod?
To hang window treatments, we often resort to using the curtain rod. Store-bought designs for the latter can be boring and it’s not easy to drill holes in the wall. Nails. This is not going to be the prettiest curtain rod alternative that you can make use of. Tree Branch. Copper Pipes. Rope. Coat Hangers and String.
How can I hang curtains without a curtain rod?
For stationary curtains, it’s easy to hang them without a rod using upholstery tacks.5 Creative Ways to Hang Curtains Without Rods upholstery tacks. tension cables. hook-eye screws and drapery pins. staples and furring strips. cabinet knobs.
Can you install curtains with a screwdriver?
A handheld screwdriver works well for the last few turns. Once you have your brackets attached to the wall, you’re ready to hang your curtain rod! It’s easiest to thread your curtains on the rod beforehand.
How much weight can command strips hold?
The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.
How do you hang curtains outside without a rod?
Hanging Outdoor Curtains without Curtain Rods If this is the case for your patio, consider using heavy-gauge exterior steel wire rope to mount your draperies. Eye hooks and wall anchors can be used to secure one end of the wire to a nearby structure, post, beam or the exterior of your home.
How do you secure outdoor curtains?
These tips should help: Place weights in the hem. Secure the curtains to other objects with magnets, Velcro, or ribbon. Magnetize your curtains. Use heavy plants or furniture to secure them. Attach a heavy-duty cord or other object either inside or on the outer, lower hem. Use a bottom rail.
How do you cover a whole wall with curtains?
How to Use Curtains to Cover a Wall Measure the length and width of the wall space you wish to cover, using a tape measure. Choose your curtains. Clear away the clutter against the wall you wish to cover. Join 10-foot lengths of conduit with set-screw conduit couplings until your rod is the desired length.
Do you need wall anchors to hang curtains?
You’ll need to use plastic wall anchors to provide proper support if you’re installing in drywall. Fasten the brackets to the walls using your drill or screwdriver. Hang the curtains and double-check to make sure your brackets are still secure. Open and close to check that they’re functioning properly before finishing.
Do I need a stud finder to hang curtains?
Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts. TIP: If you could have a stud in your wall, use a 1/8″ drill bit to check first. You will know if there is wood!Aug 19, 2019.
Are wall anchors necessary for curtains?
If the area you’re planning to drill your bracket in doesn’t have a wall stud, you’ll need to use a drywall anchor and a regular screw. Otherwise, the screw alone won’t be able to hold your rod and curtain. If your space does have a wall stud, you use a regular screw.
Do Command hooks work?
Command strips work on most surfaces, but not all. The surfaces you can use them on are painted, stained or varnished wood, glass, tile, painted cinder block, plaster, drywall, metal, and painted wallboard. They will also stick to smooth cinder block, like what you see inside school buildings.
Are Command Hooks strong?
Jumbo hooks allow you to hold up to 7.5 pounds! Using the revolutionary Command™ Adhesive, Command™ Decorative Hooks hold strongly on a variety of surfaces, including paint, wood, tile and more. Holds up to 7.5 lbs.
