Table of Contents
Command Hooks Similar to stick on curtain rods, Command hooks are another answer to how to hang curtains without drilling into the wall. In fact, they even make some specifically for this purpose. All you need to do is hang a hook on either side of the window and pop a rod it, and you’re done!Oct 13, 2020.
How do you hang curtains without rods and hooks?
How to Hang Your Curtains Without Using a Rod 1 – Hooks. There are a number of hooks you can use to hang your curtains. 2 – Drawer Pulls. 3 – Rope. 4 – Tree Branches. 5 – Sports Equipment. 6 – Nails. 7 – Copper Pipes. 8 – Upholstery Tacks.
Can you hang curtains without anchors?
Knowing which to use is very important — without a drywall anchor, a screw alone will not hold the weight of the curtain and rod. And if you try and use a drywall anchor in a stud, you’re just in for a world of frustration. Two of our three brackets went into studs. If you have dry wall, you’ll have to use an anchor.
What can I use instead of a curtain rod?
Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.
Do I have to use anchors?
“Because drywall is too weak to hang things from, a drywall anchor is necessary,” explains Matt Michaels, a spokesman for Lowe’s Home Improvement in Charlotte, NC. The anchor essentially allows you to insert screws into the wall without causing the soft drywall to crumble around it.
Do you need a stud finder to hang curtains?
The best way to hang anything on a wall is to find a stud, the wood behind the drywall. Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts.
Can you hang curtains on drywall?
Hanging curtains on drywall is not as simple as it looks. Drywall will not hold a screw because it’s not solid. If you mount a curtain rod with a screw, over time you will end up with a sagging curtain and hole. Using drywall anchors is the only solution.
How much weight can command strips hold?
The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.
Can I use Velcro to hang curtains?
Velcro, which can hold small or large curtains alike, comes to the rescue. Select a Velcro thickness suited to the curtains at hand: A 1/2-inch-wide strip may work for a small, thin cafe curtain, while a thicker strip ensures heavier or long curtains stay in place without peeling away on their own.
How do I make a wall anchor?
How To Put Anchors Into Walls Mark your hanging point with a pencil. Take a nail-set, awl, or nail and with a hammer tap a “pilot hole” into the wall. DO NOT make the hole wider than the anchor. Place the anchor over the hole and firmly tap it in until it’s flush with the wall.
How much weight can drywall hold without anchors?
How much weight can drywall hold without anchors? This can be 5 to 10 pounds, but keep in mind that the drywall is an extremely brittle material and, it is not strong enough to hold the weight for a longer period of time.
How much weight can drywall anchors hold?
Toggle bolts are the types of drywall anchors that can support up to 50 pounds, while steel hollow-wall anchors have a drywall anchors weight limit of up to 100 pounds.
What are the different ways to hang curtains?
Rod pocket, eyelet and tab top are amongst the most popular ways to hang curtains. Rod Pocket. The most basic heading is the rod pocket (also known as pole pocket) style. Curtain rings. Using curtain rings is a popular choice. Eyelet. Tab Top. Tie Top. Pencil pleat. Goblet pleat. Pinch pleat.
How do sheetrock anchors work?
What Exactly Are Drywall Anchors? Ideally, you want to hang heavy things from your walls by using the studs as the anchor. A drywall anchor goes between the screw and the drywall, biting into the drywall much more effectively than a screw would. Then, you screw into the anchor, so everything stays in place.
Are Command Hooks strong?
Jumbo hooks allow you to hold up to 7.5 pounds! Using the revolutionary Command™ Adhesive, Command™ Decorative Hooks hold strongly on a variety of surfaces, including paint, wood, tile and more. Holds up to 7.5 lbs.
Why won’t command strips stick to my wall?
Any dust, dirt, or residue can make it hard for the adhesive to form a strong bond. I recommend cleaning the area with a Magic Eraser, because it’s quick and easy, and will thoroughly clean most surfaces. After using the Magic Eraser, wipe the area with rubbing alcohol to leave it squeaky clean.
Do Command strips really work?
If you follow the instructions carefully, Command strips are highly effective. If you cut corners and don’t follow the instructions, you’ll have issues. Here are the most common mistakes people make when using Command strips: Not using enough strips.
How do you hang curtains without putting holes in the wall?
Put your drill and spackle aside, and let’s get started. Use 3M Command Hooks. Try Kwik-Hang Curtain Rod Brackets. Use Tension Rod Curtains. Get Creative With Coat Hooks. Try Magnetic Curtain Rods on Metal Doors. The #1 Way to Hang Curtains Without Wall Damage.
Can you hang curtain rods without drilling holes?
Dowels and Sticky Hooks And the beauty of using a sticky hook instead of drilling holes in the wall is that if you decide the curtains look too low or too high, you can move the rod and hooks without any damage.
