Table of Contents
Hang them where the wall and the ceiling intersect. Or string them across your actual ceiling.How to Hang Christmas Lights in Your Room: Clear packing tape on the cord works well, especially for when the lights climb the wall. If you’re hanging your Christmas lights, Command hooks work wonders.
How do you hang Christmas lights without damaging walls?
Related Articles Stick a small adhesive decorating clip to the walls in each place you want to attach a strand of lights. Tape the strands to the walls with a wall-safe transparent tape if the walls aren’t white. Fasten the lights to exposed brick walls using brick clips.
How do you hang Christmas lights from the ceiling?
Start from the hook closest to your outlet. Run the lights across your ceiling to the other side across the length of your ceiling. When you reach a hook, pull the lights tight and coil the string once around the hook. Continue working in a zig-zag pattern until you’ve covered your entire ceiling.
Can I use tape to hang Christmas lights?
Avoid Taping Christmas Lights to Your Home “Tape can trap rain or sprinkler system moisture,” said Whiddon. “One raindrop can ruin everything.” Speaking of weather concerns, Whiddon advises to always connect lights so the female plug hangs down.
Is it safe to put Christmas lights in your room?
When closed on the light strand, windows and doors can cause wires to break or become frayed from constant pressure, making them a safety hazard for shocks or electric fires. Hanging indoor lights around the window on the inside can look just as nice as outdoor lights.
How do you hang Christmas lights on your house without nails?
10 Easiest Ways to Hang Outdoor Christmas Lights (No Nails Needed!) Hang Your Christmas Lights With Tape. Adhesive Christmas Light Hooks and Clips. Hot Glue Your Lights On. Staple Them In Place. Light Up Your Rain Gutters With Gutter Clips. Boost Your Brick Walls With Brick Clips. Use a Christmas Light Projector.
How do you hang string lights indoors?
Hanging String Lights Indoors One secure option that works for most walls is to use a hammer and nails. Leave a part of the nail protruding from the wall and drape the string lights over the nail. If you are hanging fairy lights, a thumbtack should be enough to support the weight of the lights.
How can I hang lights on my ceiling without nails?
Use adhesive clips With damage-free adhesive hooks or clips, you can deck the halls without nails or stress. You can choose from various adhesive hooks and clips, depending on your needs. Some hold more weight and are helpful for wreaths or string lights with large shapes such as candy canes and snowflakes.
Is it OK to staple Christmas lights to house?
Staples Are For Paper, Not Your Home “Any penetration through your roofing materials can lead to damaging leaks.” Not only will staples damage your home, you could also damage the lights. One staple misfire can ruin an entire strand of lights. So, the first rule for safe decorating: Put down the staple gun.
What are the clips on Christmas lights for?
Designed to hold empty socket light line, stringers, and specialty strings such as icicle lights, Christmas light clips come in many different sizes and shapes.
Can you use push pins to hang Christmas lights?
Use caution when using any sharp item, such as a nail, push pin, or thumb tack. Do not insert them into the light strand as this may touch the live electrical wire.
Can I hang string lights with tape?
If you have a metal roof and do not want to install any wood, you can consider using tape to attach your string lights. If you have a wooden roof, you can use staples as well.
Do Christmas lights start fires?
Myth 5: Christmas Tree Lights Cause House Fires Christmas lights alone aren’t a fire hazard by themselves. However, holiday goers should still avoid overloading extension cords and electrical sockets with strands upon strands of lights in case of a short circuit.
Can LED lights catch on fire?
Because of this, LEDs produce far less heat than other light bulbs, and heat is how fires start. Therefore, though an LED might feel warm to the touch, it is extremely unlikely that an LED would start a fire.
How long should you leave Christmas lights on?
You can take them down anytime after New Year’s Day, but before January 6th—that’s Three Kings Day and the last of the 12 days of Christmas. Even if your lights celebrate a different faith this holiday season, the Black-Friday-to-Three-Kings-Day window is still a great guideline.
How can I hang Christmas lights without an outlet?
5 steps on how to plug in Christmas lights without an outdoor outlet? Step 1: Select the right power outlet in your basement. Step 2: Plug in an external cord into the outlet. Step 3: Take the cord to the Christmas lights through the window. Step 4: Close the window and insulate it.
How do pros hang Christmas lights?
For a super easy method to hang your outdoor Christmas lights, try light hanging clips. These can be found at most home improvement stores. You’ll have an easier time (and it will look nicer) when you hang lights on gutters, shingles, walkways and windows.
How do you hang Christmas lights with Command Strips?
To attach the Command™ Outdoor Light Clips, remove the blue liner and press the adhesive strip firmly to the back of the clip. Then, remove the black “wall side” liner and press the clip to window. Press firmly along the entire clip for 30 seconds and wait one hour before use.
