Question: How To Hang A Valance Without A Rod

How to Hang Your Curtains Without Using a Rod 1 – Hooks. There are a number of hooks you can use to hang your curtains. 2 – Drawer Pulls. 3 – Rope. 4 – Tree Branches. 5 – Sports Equipment. 6 – Nails. 7 – Copper Pipes. 8 – Upholstery Tacks.

What can I use if I don’t have a curtain rod?

Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.

Can I hang a curtain without a rod?

To hang curtains where there weren’t any before, you can put up a rod, but if you don’t want to fix one of these to the wall or prefer a different look, they can be hung without a rod as well.

How do you hang a scarf valance without a curtain rod?

Hooks can easily substitute curtain rods. You can all types of decorative hooks and finials these at your local décor store. A little elbow grease might be necessary to install the hooks on the wall. Be sure to first remove existing treatments such as window blinds before installing hooks to hang your valances.

What can you use for curtain rods?

Pipe Curtain Rod Use galvanized pipe and plumbing fittings from the hardware store for an industrial look. You could also use spray painted PVC pipe (just make sure it will be sturdy enough in the middle for your curtain material), or copper pipe for a metallic touch.

How can I hang curtains without hardware?

Here are five ways to hang curtains without damaging walls or window frames: Use 3M Command Hooks. Try Kwik-Hang Curtain Rod Brackets. Use Tension Rods. Get Creative With Coat Hooks. Try Magnetic Rods on Metal Doors.

How can I hang curtains without putting holes in the wall?

Renter-Friendly Window Treatments That Don’t Damage Walls Use Temporary Command Hooks. Hang Curtains With Tension Rods. Order Custom Compression Shades. Make a Faux Roman Shade. Buy Twist & Fit Curtain Rods. Suspend Curtain Rods from the Ceiling.

How do you hang a valance without a rod?

How to Hang Your Curtains Without Using a Rod 1 – Hooks. There are a number of hooks you can use to hang your curtains. 2 – Drawer Pulls. 3 – Rope. 4 – Tree Branches. 5 – Sports Equipment. 6 – Nails. 7 – Copper Pipes. 8 – Upholstery Tacks.

How do you hang a curtain valance?

Bottom Line A valance should traditionally cover the top 2–6 inches (5.1–15.2 cm) of your window frame with the rest of the fabric covering the wall above. If there isn’t a huge gap between the top of the window and the ceiling, hang the valance 1–2 inches (2.5–5.1 cm) from the top of the ceiling.

Does a valance need a separate rod?

A lot of valances are essentially designed so that you can hang them with the use of a curtain rod only. However, for some reason, most people think otherwise. Some even think that it is a must to hang each window treatment on a separate rod. But it isn’t always the case.

How do you hang a scarf on the wall?

Select a spot on the wall to hang the scarf. Simply hammer a nail into that spot, then drape the ribbon over the nail. The scarf hangs flat, so its design is always visible. The dowels can also hang from curtain rods or other spots.

How do you keep a scarf valance from slipping?

Keep the swag from slipping by attaching the underside of the valance to the top of the rod with two-sided tape.

How do you make a wooden curtain rod?

How to make Restoration Hardware inspired wooden curtain rods: step 1: measure to drill your hole. step 2: using your hole saw, cut out a semicircle from each bracket. step 3: sand any rough edges from the cut. step 4: beat up your brackets. step 5: stain your brackets.

What are the different ways to hang curtains?

Rod pocket, eyelet and tab top are amongst the most popular ways to hang curtains. Rod Pocket. The most basic heading is the rod pocket (also known as pole pocket) style. Curtain rings. Using curtain rings is a popular choice. Eyelet. Tab Top. Tie Top. Pencil pleat. Goblet pleat. Pinch pleat.

How do you make Velcro curtains?

Unroll a large strip of sticky-backed Velcro up against the surface where the curtain belongs, cutting it to length. Remove the backing from the rough, not fuzzy, side of the Velcro and smooth it in place. To affix the other half of the Velcro to the curtain, set the curtain on a flat, clean surface, smoothing it out.

How much weight can command strips hold?

The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.

Do magnetic curtain rods work?

Magnetic rods work best with light or sheer curtains. However, if you want to hang a curtain made from a heavier type of material, there are rods that come with more powerful magnets. The magnets that hold the curtain rods in place will only work on ferrous metals (metal containing iron).

Do you need two curtain rods to hang a valance?

We recommend using two single curtain rods of 1″ – 2″ in diameter: the top one is for the valance with swags and tails, and the lower one for the two curtain panels. This way, you have more flexibility in adjusting height, width and projection (distance from the wall).

Where should curtain rod brackets be placed for valance?

Curtain rod brackets should be placed at the height determined by the drapery rod, and the brackets should be marked approximately 3”- 4” from the ends of the drapery rod (usually beyond the window frame to allow for the curtains to open fully).

When should you use a double curtain rod?

Although very similar in design to single curtain rods, a double curtain rod allows you to layer more than one drapery panel or curtain for a more enhanced and dramatic look. Most typically, people layer a sheer curtain first and then a regular curtain on top to block out light.