Table of Contents
Where should closet rods be placed?
As a rule, place the top rod 80 to 82-inches up from the floor and the bottom rod about 40-inches up from the floor. For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging.
How do you support a closet rod?
Before installing a closet rod, it is best to place closet brackets in a position on the wall that allows for the most support. This will require a stud finder. Once wall studs have been located, closet rods and brackets can be screwed into the stud for optimal support.
How do you hang a bar in a closet?
How far should closet rod be from shelf?
A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.
Do closet rods need support?
If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.
How much weight can a closet rod hold?
Aluminum Anodized Elite 1-5/16”: Up to 80 lbs. Stainless Steel 1-1/16”: Up to 95 lbs. Steel Polished Chrome Round 1-1/16”: Up to 110 lbs. Steel Polished Chrome Round 1-5/16”: Up to 170 lbs.
Can you hang closet rod with drywall anchors?
To securely install a closet rod in drywall: Drive screws into the wall stud or drywall anchor, securing the bracket in place. Repeat this process for additional brackets, making sure they are level with the first bracket. Set your closet rod in place and use it to hang your clothing.
Do closet rods need to be in studs?
Basic Installation It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.
How much space do hanging clothes need?
Shelves for folded clothes should be placed around 12 inches apart. 84 inches is considered the minimum height to hold double hanging rods. Blouses and shirts will take up about 1 inch of rod space, pants and skirts around 1 1/4 inches and dresses, jackets and suits about 2 to 3 inches.
How do you fix a shelf that fell out of the wall?
Use screws into one stud and use anchors for the other support(s). This will stabilize the shelf quite a bit compared to anchors alone. Mount a strip of wood horizontally into 2 studs and then use wood screws to attach the shelf supports to the wood. This will also normally be quite strong.
Can you use a curtain rod to hang clothes?
Curtain rods are not designed to fit inside a closet and may not hold all your clothes. They also fail the designer test. The rods are generally silver or white, so this color does not match all closets. If you have melamine shelving, a chrome or white shower curtain rod will match and enhance your closet design.
How can I hang more clothes in my closet?
Declutter your clothes by category. Flickr/CGPGrey. Empty and clean your closet. Design your ideal closet space. Store your clothes by category. Hang anything delicate, fancy, or sturdy. Use coordinating hangers. Stack thick items like denim and sweaters. Roll t-shirts, pajamas, and workout clothes into storage boxes.
Can I use a tension rod to hang clothes?
Can A Tension Rod Hold Clothes? Of course, they can! Tension rods generally work better in children’s rooms, since their laundry doesn’t weigh as much as those of adults. You can use them as an alternative spot to hang their clothes by placing the rod’s ends on opposite walls inside their closet.
How do you maximize a hanging space in a closet?
If most of your clothes are short hanging, add an extra closet rod to instantly double the amount of hanging space. Add-on, cascading and slim profile hangers are other good ways to save space. Finally, give yourself the benefit of drawers in your closet by using hanging sweater and hanging shoe organizers.
How much weight can ribbed plastic anchors hold?
For reliable support in light-duty situations (up to 15 pounds), rely on the Qualihome Ribbed Plastic Drywall Anchor Kit.
Are there studs in closets?
Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.
What screws to use for closet shelves?
Yes you need to use screws. I would use 2 1/2-3″ deck screws. You need to go through 3/4″ of wood and 1/2″ of sheetrock, then into the stud at least as far. Your shelves will bow unless you put a center support.
How shallow can a closet be?
The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.
How deep should a closet be for a hanger?
Unless you are working with tiny baby garments, your hangers will require a closet with at least 22-inches of depth in order to swing freely on the rod. The rods must also be hung at prescribed distances from the floor and ceiling because they must accommodate the various lengths of clothing found in typical wardrobes.
