Table of Contents
How do you hang a heavy mantel on drywall?
Holding your drill at a 45 degree angle downward, drill a pilot hole through the shelf and drywall and into the stud. Install a finishing nail into each of the pilot holes with a nail gun or hammer; the nails must be long enough to penetrate at least 1 inch into the drywall. These nails will secure the mantle in place.
How are mantels attached to wall?
How Are Fireplace Mantels Attached? Standalone floating fireplace mantels can either be attached to a wall using lag screws or installed onto a back board, while mantels as part of a complete fireplace surround may be screwed into the wall using brackets.
How much weight can a mantle hold?
DO NOT OVERLOAD MANTEL: THE MAXIMUM LOAD FOR ALL 60 INCH MANTELS is 150lbs. MAXIMUM LOAD FOR ALL 72 INCH MANTELs is 180lbs.
How are mantels attached?
As with many other forms of mantle or shelf, a fireplace mantel can be commonly attached to the wall with screws or lag bolts. Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it. In this case any screws or nails may be located on top or beneath the mantel.
What holds up a fireplace mantel?
A fireplace mantel spans the top of a firebox and is often supported by legs; generally the deepest and heaviest section of the fireplace. It can also be floating, supported by corbels, and can appear well above the firebox opening or right in line with the opening.
Do you install mantel before or after stone?
If you’d like to have a mantel, it is ideally installed in conjunction with the stone veneer so this decision should be made along with the selection of your stone. There are several different materials that can be used to create a mantel, such as stone, painted wood, or natural or stained wood.
How do you hang a heavy beam mantel?
Slide Over Bolts Method Locate the studs behind the brick, stone, or faux veneer. Drive 1/2in lag screws through each of the studs. Have a helper support the mantel while you mark the location of the support rods on the back of the beam. Apply construction adhesive into the holes. Slide into place, admire, and enjoy!.
Can you set a TV on a mantel?
Upon first glance, the tv on the mantel actually looks great and it certainly minimizes the need for extra accessories on the mantel. Placing the tv on the mantel makes it a little easier to hide cords. You can run them along corner where the mantel meets the wall.
Is it OK to mount a TV above a fireplace?
Mount Your TV Above an Open-Fireplace In most cases, you should not install electronics above wood-burning stoves or gas fireplaces and inserts because they produce massive amounts of heat. That heat could severely damage your tv or other electronic devices.
Can you put a TV on fireplace mantel?
The short answer is – yes. However, to ensure your television isn’t damaged from the heat, care must be taken to ensure heat generated by the fireplace is redirected away from television. There are several ways to do this, such as installing a proper mantel and building an alcove for the television.
Can you use a floating shelf as a mantel?
For those of you that haven’t opened up your Kreg Jig yes, this is a GREAT beginner project! The shelf is 60″ long making it a perfect mantle as well! I also think floating shelves are perfect for renters. Really you only leave a few screw holes in the wall that are very easy to fill and paint back over.
How much should a mantel overhang?
A mantel should extend a minimum of 3 inches beyond the firebox opening. If the fireplace has facing around the opening, the mantel can also extend 3 or more inches beyond that.
What type of wood is used for mantels?
Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.
How far should a mantle stick out?
The proportions of your mantel in relationship to your fireplace are important. Generally, your mantel should extend a minimum of three inches beyond the opening of your fireplace. For reference, if you have a 36-inch fireplace, you’l likely want a mantel width of 48 inches.
What is a fireplace damper?
A chimney damper prevents conditioned (warmed or cooled) house air from escaping through the flue when you’re not using the fireplace. You need to open the damper when you start a fire to allow for proper airflow and let the smoke out.
