Table of Contents
How do you hang a clothes rod from the ceiling?
Draw a straight line on the ceiling at right angles to the joists using a yardstick or straightedge tool as your guide. Make the line the length of the closet rod you purchased for the project. Put the line at least 12 inches from the back wall of the closet to allow room to hang clothes hangers on the clothes rod.
How do you support a closet rod?
Before installing a closet rod, it is best to place closet brackets in a position on the wall that allows for the most support. This will require a stud finder. Once wall studs have been located, closet rods and brackets can be screwed into the stud for optimal support.
Can you hang a closet rod in drywall?
You can hang a closet rod in the drywall in such a fashion that it holds your clothing without pulling out of the wall. In order to do so, it’s best to use shelf support style brackets. These brackets can be set at any point along the back wall of your closet.
How far should a clothes rod be from the wall?
Determine Rod Placement Measure for the distance away from the wall. A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.
Do closet rods need support?
If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.
How can I hang more clothes in my closet?
10 Ways to Squeeze a Little Extra Storage Out of a Small Closet Double your available hanging space by adding an extender rod. Store clothes on shelves more efficiently with shelf dividers. Double your shelf space with under shelf baskets. Hooks are your very best friend.
How much support does a closet rod need?
You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging. When spanning an opening of more than 48-inches, consider adding a center support to the closet rod for added stability.
Does a closet rod have to go into a stud?
It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.
Do closets usually have studs?
Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.
How much space do hanging clothes need?
Shelves for folded clothes should be placed around 12 inches apart. 84 inches is considered the minimum height to hold double hanging rods. Blouses and shirts will take up about 1 inch of rod space, pants and skirts around 1 1/4 inches and dresses, jackets and suits about 2 to 3 inches.
What is the average hanging space per person?
Aim for a minimum of 2.4m of wall space per person (without additional bedroom furniture). Allocate 600mm for the widest items you wish to hang, plus an extra 100mm for easy viewing. You’ll need a corridor of at least 800mm as your ‘walk-in’ space.
How much weight can a closet rod hold?
Aluminum Anodized Elite 1-5/16”: Up to 80 lbs. Stainless Steel 1-1/16”: Up to 95 lbs. Steel Polished Chrome Round 1-1/16”: Up to 110 lbs. Steel Polished Chrome Round 1-5/16”: Up to 170 lbs.
How do you maximize a hanging space in a closet?
If most of your clothes are short hanging, add an extra closet rod to instantly double the amount of hanging space. Add-on, cascading and slim profile hangers are other good ways to save space. Finally, give yourself the benefit of drawers in your closet by using hanging sweater and hanging shoe organizers.
How thick should a closet rod be?
A closet-rod dowel is usually between 1 1/4 inches to 1 3/8 inches in diameter. This diameter allows for plenty of hanging strength. It resists breakage, and will not bend when properly supported.
Is it better to fold or hang clothes?
What to fold: Anything that can easily stretch out, such as sweaters, knits, T-shirts and sweats, should be folded rather than hung, because folding puts less stress on these materials. Sturdy items like denim, cords and khakis also do well folded.
Can you use a tension rod to hang clothes?
Can A Tension Rod Hold Clothes? Of course, they can! Tension rods generally work better in children’s rooms, since their laundry doesn’t weigh as much as those of adults. You can use them as an alternative spot to hang their clothes by placing the rod’s ends on opposite walls inside their closet.
How do you measure a closet rod?
First, position your tape measure horizontally, and measure 12 inches from the rear wall. This marks the ideal depth of the closet rod. Next, you’ll want measure 66 inches from the ground upward, which marks the ideal closet rod height.
What is standard shelf height?
For ease of shelf access, bookcases are generally no higher than 84 inches. Small bookcases are usually 30 to 42 inches high. The highest shelf in a bookcase should be as high as an average-sized person can comfortably reach – about 72 to 78 inches.Contact Us. Species Modulus of Elasticity (E) Western Red Cedar 1.12.
Can I put up a shelf without a stud?
Fortunately, there are several different options you can use to support a shelf. The most common one is a drywall anchor, which is like a plastic screw that plugs into drywall. If you’re working with plaster or need something that bears more weight, try using a molly bolt. For very heavy shelves, pick toggle bolts.
How far apart are studs in my closet?
#1: Stud Placement When installing rods and shelves, it’s important to locate the studs and use them to determine your screw placement. Studs are usually placed either 16 or 24 inches apart.
Are studs always in corners?
Studs exist to hold up drywall on interior walls and wood sheathing on exterior walls. This means you will always find a stud, header, or footer on the top, bottom, or corners of walls.
How shallow can a closet be?
The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.
How many hangers do I need?
If you are planning to hang only t-shirts which do not take much space, then you may hang up to 19 hangers per foot. However of you want to hang jackets and suit that are bulky you may make space for 15 hanger per foot. Simple shirts and casual to format dresses would allow you to use 15 to 16 hangers per foot.
