Table of Contents
Draw a straight line on the ceiling at right angles to the joists using a yardstick or straightedge tool as your guide. Make the line the length of the closet rod you purchased for the project. Put the line at least 12 inches from the back wall of the closet to allow room to hang clothes hangers on the clothes rod.
How far from the ceiling should you hang a closet rod?
As a rule, place the top rod 80 to 82-inches up from the floor and the bottom rod about 40-inches up from the floor. For a single rod application, plan 60-inches from the floor for placement.
How much weight can a closet rod hold?
Aluminum Anodized Elite 1-5/16”: Up to 80 lbs. Stainless Steel 1-1/16”: Up to 95 lbs. Steel Polished Chrome Round 1-1/16”: Up to 110 lbs. Steel Polished Chrome Round 1-5/16”: Up to 170 lbs.
How long can closet rods go without support?
If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.
How can I hang more clothes in my closet?
10 Ways to Squeeze a Little Extra Storage Out of a Small Closet Double your available hanging space by adding an extender rod. Store clothes on shelves more efficiently with shelf dividers. Double your shelf space with under shelf baskets. Hooks are your very best friend.
Are there studs in closet walls?
Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.
Can you hang closet rod with drywall anchors?
To securely install a closet rod in drywall: Drive screws into the wall stud or drywall anchor, securing the bracket in place. Repeat this process for additional brackets, making sure they are level with the first bracket. Set your closet rod in place and use it to hang your clothing.
Do closet rods need to be in studs?
Basic Installation It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.
How much clearance do you need between closet rod and shelf?
A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.
How thick should a closet rod be?
A closet-rod dowel is usually between 1 1/4 inches to 1 3/8 inches in diameter. This diameter allows for plenty of hanging strength. It resists breakage, and will not bend when properly supported.
Is it better to fold or hang clothes?
What to fold: Anything that can easily stretch out, such as sweaters, knits, T-shirts and sweats, should be folded rather than hung, because folding puts less stress on these materials. Sturdy items like denim, cords and khakis also do well folded.
Where do you hang double closet rods?
When installing double rods, hang the top rod 80 inches from the floor and the bottom rod 40 inches from the floor. Leave at least 3 feet of space between the two rods. These systems usually work best for skirts, blouses, shirts or pants folded over a clothes hanger.
How do you double out a closet space?
7 Genius Ways to Double Your Closet Space Add a Second Closet Rod. Use the Back of the Closet Door. Ditch Plastic Hangers. Add Shelves Above a Closet Rod. A Seasonal Shift. Double Up on Hangers With Soda Pull Tabs. Invest in a Closet System.
How do you double up a hanger?
Make double hangers. Take the soda tab and loop it around the neck of your first hanger. Then, take your second hanger. Place the hook into the soda tab. You now have a double hanger, which you can use in your closet.
How do you hang a closet rod in plaster?
Drill a hole through the plaster wall, insert the toggle bolt through the rod holder, press the toggle through the drilled hole and tighten it down with a screwdriver. Hang the dowel rod on the closet rod holders.
How much weight can drywall hold with anchors?
Toggle bolts are the types of drywall anchors that can support up to 50 pounds, while steel hollow-wall anchors have a drywall anchors weight limit of up to 100 pounds.
Does a closet door need a header?
As you might have guessed, even a closet doorway needs a header. No matter how light the door, window, shutter — or even if an opening is empty — you must frame it with king studs, jack studs, cripples (one every 16 inches) and a header.
How do you support closet shelves?
If additional support is needed to keep the shelves from sagging, either install a metal bracket in the center under each shelf, or glue and nail a piece of 1 x 2 to the front edge of each shelf.
How do you fix a shelf that fell out of the wall?
Use screws into one stud and use anchors for the other support(s). This will stabilize the shelf quite a bit compared to anchors alone. Mount a strip of wood horizontally into 2 studs and then use wood screws to attach the shelf supports to the wood. This will also normally be quite strong.
How do you keep shelves from sliding?
When cut into pieces and placed under each corner of a bookshelf, virtually any sort of thin rubber mat – including bath mats and sink liners – will help keep the furniture secure. Alternatively, you can use beaded rubber cabinet and drawer liners in the same fashion as rug pads to prevent your bookshelf from sliding.
How much weight can ribbed plastic anchors hold?
For reliable support in light-duty situations (up to 15 pounds), rely on the Qualihome Ribbed Plastic Drywall Anchor Kit.
How do you install drywall anchors?
How To: Use Drywall Anchors STEP 1: Choose the right drywall anchor. STEP 2: Twist the self-drilling wall anchor into drywall with moderate pressure. STEP 3: Turn the drywall anchor in until the lip is flush with the wall. STEP 4: Attach your rack or shelf to the wall by screwing into the drywall anchor.
Is it possible for a wall to have no studs?
Can a wall not have studs? The answer is no—a wall must have studs to ensure structural support. However, there are some variations in how a wall can be framed and where you will locate studs.
Can you screw into drywall without an anchor?
The threads of a screw into only drywall, without an anchor, will NOT permanently hold in the drywall. It will just pull right back out sooner or later. Even though it may screw into the drywall and “feel” tight, when you hang a picture on it, it will pull out almost immediately. Especially if the picture is heavy.
