Table of Contents
How do you attach a fan to a vaulted ceiling?
Can you put a ceiling fan on a sloped ceiling?
Most (but not all) ceiling fans on the market today can be installed on a ceiling angled up to 28 degrees without any problem or any extra accessories needed. So if you have a ceiling angle up to 28 degrees, you should not have any issues finding a fan to install.
How long should a downrod be for vaulted ceilings?
Determine Downrod Length Most ceiling fan manufacturers include a short downrod in the box, but to install a ceiling fan safely on a vaulted or cathedral ceiling you will need to have a total downrod length of at least 12 inches.
How low should a ceiling fan hang from a vaulted ceiling?
Downrod length calculation for sloped and vaulted ceilings The fan blades should not hit the walls or the sloped ceiling. There should be sufficient space above the fan blades to circulate air efficiently. The fan should be atleast 7-8 feet from the floor.
Can you put a flush mount fan on a sloped ceiling?
Flush mount ceiling fans are meant to be used on flat ceilings. Since flush mount fans are anchored directly to the ceiling, they require an adapter and downrod to fit vaulted or sloped ceilings.
Can you put a flush mount light on a sloped ceiling?
Flush mount lighting is lighting that installs directly against the ceiling. While you can use this kind of lighting for a sloped ceiling, it’s usually not be the best choice because sloped ceilings tend to be taller than normal, and this kind of lighting is most effective on low ceilings.
How high should a ceiling fan be on a vaulted ceiling?
But in general, a small room with a vaulted ceiling should take a 42-44 inch fan. You may get away with a ceiling fan as large as 60″ depending on ceiling height and room layout. For a large room with a sloped ceiling, there are choices all the way up to 96 inches.
Is a cathedral ceiling the same as a vaulted ceiling?
A vaulted ceiling slopes upward from both sides to form a peak. On the other hand, cathedral ceilings are defined by their symmetry: they feature two equal sloping sides that meet at a higher point in the middle and often conform to the shape of the roof.
How do you hang a light fixture on a sloped ceiling?
Pendant lights and ceiling fans that use downrods can be modified to hang straight from a sloped ceiling by installing a sloped ceiling adapter. The adapters are designed to be used with some of the light’s original hanging hardware and are typically installed between the canopy and the downrod.
How do I choose a downrod length?
The most common method used to find the right downrod length is to take the ceiling height, subtract the height of the ceiling fan (most fans are between 12 and 18 inches in height depending on the fan), and then subtract the desired hanging height (usually eight feet).
How do you find the angle of a vaulted ceiling?
Stand at one wall where the ceiling slopes down to meet it. Place an angled tape measure at the seam between the ceiling and wall. Pull it out so it measures the the sloping portion of the ceiling. Take this measurement.
Do I need a downrod for my ceiling fan?
Most ceiling fans are designed to hang from standard ceiling heights of 8′ to 9.5′ tall, without the need to add a longer downrod. If your ceiling is higher than this you will need to use a longer downrod than what the ceiling fan will probably be packaged with.
Do ceiling fan light kits fit all fans?
Answer: Many ceiling fan light kits are interchangeable but it depends on the brand and model of the ceiling fan. Certain ceiling fan brands like Hunter and Casablanca only make light kits that fit their respective ceiling fan models.
Can a ceiling fan be too close to the ceiling?
Except with very low ceilings, avoid locating the fan too close to the ceiling. It will not distribute air as well. However, for safety, the blades should never be less than 7′ above the floor.
What is a downrod?
A downrod is a pipe, usually metal, that connects the fan, or specifically the motor housing of the fan, to the ceiling mount.
Do hugger ceiling fans work?
Hugger fans are ideal for rooms that have ceilings under 8 feet in height or in situations where a fan with optional light would hang down too low. Hugger fans will not move as much air as a regular fan because the blades are closer to the ceiling.
Can you convert a flush mount ceiling fan to downrod?
In most cases, the “pole” or down rod, can be added to an existing fan. These down rods are available at hardware stores in different lengths (18, 24, and up to 36 inches), and in different finishes, such as brass, white, etc.
How do you light a room with a vaulted ceiling?
Use lighting fixtures to really play up your vaulted ceilings. Because of the additional height, angled and sloped ceilings allow for even more choice when it comes to type and placement of lights. Go for interesting chandeliers and pendant lights for style and add recessed lighting for additional ambient illumination.
Can you put recessed lights in a vaulted ceiling?
You really can’t go wrong with recessed lighting in a vaulted ceiling because their versatility, inconspicuous design and customizable illumination. There are many kinds of recessed trims you can pick from, and we recommend choosing fixtures with housings specially designed for vaulted ceilings.
