Table of Contents
How often should you grease trailer hubs?
When Should You Grease Your Bearings With a larger travel trailer, you should grease your trailer wheel bearings every 10,000 miles or once a year, whichever comes first. If you have a smaller travel trailer, however, you’ll need to grease your wheel bearings every 2,000 miles.
How do you grease utility trailer hubs?
Should I fill my trailer hub with grease?
1 and 2), pump a ring of grease into the entire circumference of the wheel hub and coat the hub cap inner wall. The housing should only be half full of grease. Too much grease causes churning and higher temperatures. Semi-fluid grease must be used with a vented hub cap.
Can you over grease trailer bearings?
There’s no such thing as too much grease for bearings! You would not pack grease in the hub otherwise and not in the drum since the brakes would not be able to grab with grease in the hub. Grease caps, dust caps, and bearing protectors have to be installed right to avoid losing them.
Do you grease wheel hub assembly?
Hub assemblies can be oiled or greased, and just like motors and transmissions, the lubricant and lubrication practices will have a considerable impact on their life expectancy and operation. The better you take care of these components, the longer they will last.
Can you over grease a bearing?
When it comes to regreasing bearings, more is not always the better option and actually can be a costly mistake. Too much grease volume (overgreasing) in a bearing cavity will cause the rotating bearing elements to begin churning the grease, pushing it out of the way, resulting in energy loss and rising temperatures.
How do I know if my trailer bearings need grease?
Keep your hand on the wheel and spin it. If you feel any motion that is not smooth, hear any noises, or if the wheel does not spin freely, the wheel bearing is defective or needs lubrication.
How often should you grease utility trailer wheel bearings?
Proper lubrication helps maintain functionality and reliability of your trailer’s axle(s). Bearings should be lubricated approximately every 12 months or 12,000 miles unless otherwise specified by the axle manufacturer.
What kind of grease do you use for trailer bearings?
LMX Red Grease A heavy-duty, premium grease rated for just about every application, including marine trailer-wheel bearings. It resists water well and sticks in place, so it’s excellent in outdoor applications, but it isn’t specially formulated for wheel bearings.
Can you put too much grease in a bearing buddy?
Can Bearing Buddy Bearing Protectors Be Over-Filled with Too Much Grease It is possible to over-fill a hub that has a Bearing Buddy bearing protector such as #BB1781. The convenience of easy filling through the zerk fitting can often mean we can be tempted to keep adding more grease.
Why are my trailer hubs hot?
When a hub heats up it is usually from either inadequate lubrication or a castle nut that is too tight; you confirmed that neither of these applies in your situation. If the trailer is overloaded with more weight on each hub than they are rated for this too can lead to higher hub temperatures.
Should you grease a trailer ball?
You do not need to grease your trailer hitch ball. That is entirely up to you. However, greasing it is recommended. Greasing will help ensure that the trailer hitch ball keeps its structural integrity, and it will help prevent it from squeaking.
Are bearing buddies a good idea?
Bearing Buddies are a great way to keep grease in a trailer hub. I recommend them as long as you are aware that it’s very easy to put too much grease in a hub with these which will blow out the seal. They have no problem being used on longer road trips so the would work well for you.
How often should you change trailer wheel bearings?
Expert Reply: We recommended to repack the wheel bearings on your trailer every 12 months or 12,000 miles. There is not a specific guideline as far as actually replacing the bearings. When repacking them with grease, you will also just want to check for any damage or wear and replace anything if needed.
What oil do you use for wheel hubs?
Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications.
How often should I grease a bearing?
Using the chart and the formula, the bearing only needs 8 grams of grease every 10,000 hours. If your grease gun delivers around 1.35 grams per stroke, that means the bearing needs 6 strokes every 13 months; you could average it out to a stroke every 8 weeks or so.
How much grease should you put in a bearing?
Open angular contact thrust ball bearings for screw drives should be lubricated with a grease quantity that fills ~ 25 to 35% of the free space in the bearing. Freshly greased bearings should be operated at low speeds during the running-in period.
How much play should be in a trailer wheel bearing?
Jack up the trailer and secure it on adequate capacity jack stands. Check wheels for side-to-side looseness – There should be a very slight amount of play in the wheel, typically 1/8-inch or less. If the wheels are loose or spin with a wobble, the bearings must be serviced or replaced.
