Table of Contents
How often should you grease wheel bearings on a trailer?
When Should You Grease Your Bearings With a larger travel trailer, you should grease your trailer wheel bearings every 10,000 miles or once a year, whichever comes first. If you have a smaller travel trailer, however, you’ll need to grease your wheel bearings every 2,000 miles.
How do you grease trailer bearings?
Can you over grease trailer bearings?
There’s no such thing as too much grease for bearings! You would not pack grease in the hub otherwise and not in the drum since the brakes would not be able to grab with grease in the hub. Grease caps, dust caps, and bearing protectors have to be installed right to avoid losing them.
What kind of grease do you use for trailer bearings?
LMX Red Grease A heavy-duty, premium grease rated for just about every application, including marine trailer-wheel bearings. It resists water well and sticks in place, so it’s excellent in outdoor applications, but it isn’t specially formulated for wheel bearings.
How do I know if my trailer bearings need grease?
Keep your hand on the wheel and spin it. If you feel any motion that is not smooth, hear any noises, or if the wheel does not spin freely, the wheel bearing is defective or needs lubrication.
Should I grease my trailer ball?
You do not need to grease your trailer hitch ball. That is entirely up to you. However, greasing it is recommended. Greasing will help ensure that the trailer hitch ball keeps its structural integrity, and it will help prevent it from squeaking.
Should I fill my trailer hub with grease?
1 and 2), pump a ring of grease into the entire circumference of the wheel hub and coat the hub cap inner wall. The housing should only be half full of grease. Too much grease causes churning and higher temperatures. Semi-fluid grease must be used with a vented hub cap.
How much grease should you put in a bearing?
Open angular contact thrust ball bearings for screw drives should be lubricated with a grease quantity that fills ~ 25 to 35% of the free space in the bearing. Freshly greased bearings should be operated at low speeds during the running-in period.
Are bearing buddies a good idea?
Bearing Buddies are a great way to keep grease in a trailer hub. I recommend them as long as you are aware that it’s very easy to put too much grease in a hub with these which will blow out the seal. They have no problem being used on longer road trips so the would work well for you.
How do you know when a Bearing Buddy is full?
The air pockets inside the hub cavity and Bearing Buddy® will work their way out past the piston (or blue ring) on the Bearing Buddy®. You should see the piston extend out or the blue ring past the front of the Bearing Buddy® when it’s properly filled.
How warm should trailer bearings get?
About 130-140 is too hot to touch and anything above that probably too hot for a wheel bearing. Compare it to your hot water temp at home. If you can’t touch the wheel then I would consider them too hot… warm to the touch is OK.
Can you over grease a bearing?
When it comes to regreasing bearings, more is not always the better option and actually can be a costly mistake. Too much grease volume (overgreasing) in a bearing cavity will cause the rotating bearing elements to begin churning the grease, pushing it out of the way, resulting in energy loss and rising temperatures.
Is red and tacky grease good for wheel bearings?
Lucas Red N Tacky Wheel bearing grease is certified by the National Lubricating Grease Institute and is ranked in the highest performance category there is. Featuring rust and oxidation preventative inhibitors that make this grease more water resistant.
How often should I grease my bearing buddies?
Every 3,000 to 3500 miles or annually, whichever comes first. Manufacturers recommend to remove old contaminated grease from the hub and repack with new grease instead of just adding more.
When should I repack trailer bearings?
How often should you repack your trailer bearings? The axle manufacturers recommend that you repack your trailer bearings once annually or every 12,000 km. If you are over-do for trailer wheel bearing maintenance, we would be happy to help you.
How often should I grease my trailer axles?
If your trailer’s axle(s) are equipped with a grease zerk on the ends, the bearings must be greased every six months or 6,000 miles to ensure functionality. To apply the grease, remove the rubber plug from the axle end and place the grease gun on the zerk. Pump grease until new grease begins to appear.
Can you put too much grease in a bearing buddy?
Can Bearing Buddy Bearing Protectors Be Over-Filled with Too Much Grease It is possible to over-fill a hub that has a Bearing Buddy bearing protector such as #BB1781. The convenience of easy filling through the zerk fitting can often mean we can be tempted to keep adding more grease.
Do wheel bearings need grease?
Not only should grease be packed into the bearing, but some grease should be applied to the housing and on the wheel end’s inside surfaces where the bearing sits. This will help prevent corrosion. The housing should also have some grease in the cavity surrounding the bearing, but it should not be filled.
