How To Get Water Out Of Iphone Lightning Connector

Table of Contents

To remove extra liquid, gently tap your iPhone on your hand with the lightning connector facing down. Place your iPhone in a dry, well-ventilated place. After at least 30 minutes, try charging using a lightning cable or connecting a lightning accessory.

What do you do if you get water in a Lightning connector?

Now, let’s take a look at the things we should do in case of the “liquid detection in lightning connector” message: Remove the Lightning Accessory and Dry out the Moisture. Dismiss It When the Liquid Detection Alert Appears. Reboot It If the iPhone Charging Is Still Not Available.

How do I get water out if my charging port?

Go to Settings >> select Battery Usage >> scroll down to Recent Battery Usage >> find and tap on Android System >> tap on Force Stop (you will get a warning that it could cause system problems). Turning it OFF did away with the “Detecting Moisture” notification that was making it impossible to charge my device.

How do you dry the Lightning connector?

The error message has to be taken seriously because most probably the phone detected some traces of moisture in the port. Now, after removing the Lightning accessory, place your phone on a dry surface upright and let it be so for a few hours to dry out the moist.

How do I get water out of my charging port fast?

Water will naturally evaporate from the charging port within approximately 1 to 2 hours. If any liquid other than fresh water enters the charging port of your device, you must rinse it in fresh water and dry it thoroughly with a dry, soft cloth.

How do I dry out my phone port?

Put Your Phone in Front of a Fan, or Leave it to Dry Naturally. If you want to speed up the drying process of your phone’s USB port, we recommend placing it in front of a fan or even near an open window (if you’re sure it’s not going to rain!).

How long does it take for an Apple connector to dry?

Leave your iPhone in a dry area with some airflow for up to a day. You can try again to charge or connect a Lightning accessory throughout this period. It might take up to 24 hours to fully dry.

How do you get water out of a connector?

How do you get water out of a connector? Go to Settings >> select Battery Usage >> scroll down to Recent Battery Usage >> find and tap on Android System >> tap on Force Stop (you will get a warning that it could cause system problems).

How do you dry out a Lightning port on an iPhone?

Turn off your iPhone and leave it on a flat surface. If possible, surround your iPhone with desiccants, which can help it dry out. You can often find small desiccant packs in shoeboxes or shipping containers. Then, it’s time to be patient.

What does liquid in Lightning connector mean?

The “lightning connector” is just a fancy term for your iPhone’s charging port. When you see the “Liquid Detected in Lightning Connector” alert, it means that either your phone’s charging port, or the lighting charging cable are wet or moist.

How do you remove liquid from iPhone?

The process is simple. Power off your iPhone and submerge it inside uncooked rice. Make sure to submerge it completely within rice for a couple of days. The rice should be able to absorb at least some of the moisture from your iPhone.

How do you get the fluid out of a Lightning connector?

How can I dry my phone port fast?

Here’s how to dry out your phone charging port: Don’t grab the rice. Leave your device in a dry area for at least an hour with the charging port facing down. If you suspect your USB-C or Lightning cable is also wet, store it in a dry place where air can reach it for an hour as well.

How do I get moisture out of my phone USB port?

9 Answers Buy a wireless charger and get enough charge on it to atleast be able to get into settings (2-3% would be enough) GO into settings and into battery usage. Scroll down to ‘Recent Battery Usage’ and find the app ‘Android System’ Tap on that and then tap on ‘Force Stop’.

How do you dry out an iPhone?

To dry iPhone, tap it gently against your hand with the Lightning connector facing down to remove excess liquid. Leave the device in a dry area with sufficient airflow. Placing the device in front of a fan blowing cool air directly into the Lightning connector may help the drying process.

Why won’t the moisture detected won’t go away?

It is possible that the update contained a bug which caused the moisture sensors to glitch out and stopped them from working efficiently. Wet Port: If the charging port of the mobile phone is wet or has retained some moisture the “moisture detected” message will not go away unless you get rid of it.

How long does it take for an iPhone to dry out?

You should still give the iPhone at least 48 hours to dry out completely, however.

Can you fix water-damaged iPhone?

In fact, water damage is one of the most common problems that iPhone users experience. But there’s no need to panic just yet—there’s a good chance that your water-damaged iPhone can be repaired. Once your phone has gotten wet, it’s critical not to charge it or put it in rice in a misguided attempt to dry it out.

What do you do when your iPhone falls into water?

What to do if you drop your iPhone in water Turn it off immediately. Power off your iPhone as soon as possible. Take your iPhone out of the case. Take your iPhone out of its case to make sure it’s totally dry. Ease liquid out of the ports. Remove your SIM card. Wait for your iPhone to dry.