Quick Answer: How To Get Stains Out Of Granite Countertops

Table of Contents

Mix a poultice paste of baking soda and water (for oil-based stains), or baking soda and peroxide (for others), until it’s as thick as peanut butter. Spread the mixture over the spot, cover it with plastic wrap that you’ve poked a few holes in, and secure it with masking tape. Let the poultice paste stand for 24 hours.

Does baking soda remove stains from granite?

Remove stains from your countertop without damaging the natural stone by using these tips: Apply a baking soda paste: No matter what you spilled, odds are baking soda can help remove it. Then rinse and wipe the granite with a soft cloth to hopefully reveal a stain-free surface.

Does vinegar remove stains from granite?

Vinegar spells trouble for granite countertops (and any other natural stone countertop). The acid in vinegar wears away at the protective sealant that prevents spills from penetrating the stone and causing permanent stains. In addition, over time vinegar can cause etching in the granite itself.

Are granite stains permanent?

In some cases, particularly with oils or grease, liquid left on the counter can soak in and create a stain. However, even when this happens, the stain is not necessarily permanent. Most of the time it can be removed using a topically applied paste that draws out any moisture from the stone.

What is the best homemade cleaner for granite?

Pour one-half cup of rubbing alcohol, one-half teaspoon of dish soap, and one-and-a-half cups of warm water into the spray bottle. The disinfecting properties of alcohol, coupled with the de-greasing powers of dish soap, will deliver a one-two punch to banish bacteria and grime from the granite surface.

Is hydrogen peroxide safe for granite?

Hydrogen peroxide is safe for use on granite occasionally as it will not immediately damage granite countertops but could with repeated application. Over time regular use of acidic or harsh cleaners can etch and dull the polish and degrade the granite sealer.

Does white vinegar damage granite?

Frequent use of vinegar, Windex or bleach will dull the granite and weaken the sealant. Avoid using abrasive pads, as granite can be scratched.

Should you use bleach on granite?

Bleach: While bleach is a great disinfectant, it can dull the finish of your granite and in some cases even change its color. There are other, safer, ways to disinfect your stone, so avoid bleach and any products that contain it when cleaning your granite.

How do you get the shine back on granite countertops?

Using dish soap or other soap-based cleaners to clean your countertops will result in a film that makes surfaces look dull. It’s an easy fix, though. Simply get a quality soap film remover to get the shine back. High mineral content in your water (hard water) can also result in a dulling buildup on your countertops.

Can stains be removed from granite?

If granite has a stain it means a substance is absorbed into the pores of granite and will require a poultice, like the ones offered by Stone Care International, to remove it. Poultice are extremely absorbent substances.

How do you get dark stains out of granite?

Can you fix discolored granite?

Steps to Fix the Discoloration: Apply a small amount of baby oil to a clean white rag. Rub it over the lighter spot (or a portion thereof). If your countertops are not properly sealed, the oil may stain. If the oil darkens the counter and you like the look, use Stone Color Enhancer to make it permanent.

Is rubbing alcohol good for granite countertops?

A well-sealed granite countertop is relatively impervious to bacteria. Hot water and dish soap should be adequate for daily sanitizing. However, if a disinfectant is desired, reach for a bottle of 70% isopropyl alcohol. So we recommend a bottle of 70% isopropyl alcohol.

Can I use Clorox wipes on granite?

You should avoid using acid-based cleaners — lemon, orange, vinegar or bleach-based — on granite. That means those Clorox disinfecting wipes (which contain citric acid) that make cleanup so easy are actually quite bad for your granite’s seal.

Will rubbing alcohol harm granite?

Rubbing alcohol is a natural bactericide and can also kill fungus and viruses. It has no ill effects on your granite or the seal on your granite so it’s an ideal way to keep countertops clean.

Can I use Murphy’s oil soap on granite?

Cleaning: Clean stone surfaces with a mild dishwashing liquid and warm water, Murphy’s Oil Soap in the spray bottle or a granite care stone cleaner. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth.

How do you get oil stains out of granite countertops?

Try creating a baking soda solution to take care of tough stains on your granite. If the stain is water based, use a mixture of baking soda and hydrogen peroxide. If your stain is oil based, use a mixture of baking soda and water to form a paste. Spread your paste over the stained area and let sit for several hours.

Is Dawn dish soap safe for granite?

For regular granite cleaning, your best bet is nothing more sophisticated than mild dish soap diluted with water. (You can also make a homemade granite cleaner that has a base of rubbing alcohol.) Wet a sponge with water from the tap and squirt dish soap into its center.

What should you not use on granite countertops?

Rock Doctor suggests that you avoid the following on your granite countertops: Ammonia. Bleach. Vinegar. Grout cleaners. Bath tile cleaners. Orange, lemon, or other citrus cleaners. Glass cleaners. Hydrogen peroxide.

What cleaners are safe for granite?

13 best natural granite cleaners. Dr. Bronner’s All-Purpose Cleaner. method All Purpose Cleaner. Seventh Generation Granite & Stone Cleaner. method All-Purpose Compostable Cleaning Wipes. Mrs. Meyer’s Multi-Surface Cleaner. Caldrea Countertop Spray. method Daily Granite Cleaner. Grove Co.

How do you get hard water stains off of granite?

While it’s not generally wise to use abrasive cleaners on your natural stone countertops, you can safely treat stubborn hard water stains with a paste of baking soda and water. Simply apply it to the affected area and scrub it with a soft-bristled brush, then rinse with water and dry with a microfiber cloth.