Table of Contents
How to Build a Wall Niche 1 Lay Out Niche. Determine that the wall you’re cutting into is not a load-bearing or exterior wall. 2 Cut Deeply Into Wall Studs. 3 Finish Cut with a Reciprocating Saw. 4 Rip-Cut Frame Boards to Width. 5 Assemble Niche Box. 6 Trim Out Niche. 7 Fasten Niche Box.
How do you build a wall niche?
use hammer to knock out drywall. Score the Wall, Knock Out the Drywall. Using a carpenter’s square and a level, measure and mark the desired location for the wall niche. nail box into wall studs. Install the Box. Fit the box into the wall. add rosettes to corners to finish. Attach the Trim, Rosettes; Finish Caulking.
How do you hang a drywall niche on a wall?
Cut four 2-inch-by-4-inch lumber beams with a circular saw to match the height and width of the wall niche. Place all four beams into the wall niche, 1/2 inch from the edges of the niche’s border. This will allow the drywall patch to sit seamlessly inside the niche, covering it smoothly from the outside.
How thick does a wall need to be for a niche?
The typical depth of a shower niche is 3.5 inches, the width of a wood stud. In a high rise building, the steel studs may be 2.5 inches deep and this should be considered. This is still wide enough for most bottles. Niches should not be against outside walls if possible in cold weather climates.
How do you waterproof a niche?
Waterproof Shower Niche To waterproof a tiled niche, apply waterproof backerboard to the inside surfaces of the niche. Next, apply waterproof membrane, bedding it in unmodified thinset. With the waterproofing complete, install the tile starting with the bottom of the niche, which should have a slight pitch for drainage.
Where should a shower niche be placed?
Positioning your niche at chest to eye-level is a good standard. This translates to a height of about 48 to 60 inches. Ideally, you’ll want to position your niche to fit between the studs which are usually located 16 inches apart.
How do you make a plaster niche?
Steps 1Find the stud openings in the wall. 2Cut to locate the stud. 3Measure the height and width of the niche. 4Cut out the plaster. 5Install the niche. 6Apply the multi-purpose joint compound. 7Apply the second coat of the joint compound. 8Scrape and sand back the compound.
What do you put in a niche?
Make Wall Niches Stand Out Paint, tile, and moulding. Add in a statement piece. Highlight the space with art. Turn Your Wall Niche Into a Functional Area. Add a Decorative Sculptural Element. Fake Built Ins. Fill in the Wall Niche with Furniture.
How do you drywall a niche?
How to Enclose a Wall Display Niche Remove the shelves from inside the wall display niche. Measure the depth and the height of the niche. Cut two 2-by-2 inch boards to fit inside the niche. Mark the inside vertical edge of the niche 5/8 inch in from the wall’s edge every 6 inches on both sides of the niche.
How long does it take to install a wall niche?
Most wall niches ship within 7 to 10 business days (in most cases sooner). Your wall niche will come with simple instructions making installation a breeze.
What are wall niches?
A wall niche is basically a decorative box nested inside a wall of your home. People love them because they’re fully customizable, and they offer a creative way to squeeze in some extra storage out of a blank wall. But not all niches have to be functional, and in fact many are purely decorative.
How much slope does a shower niche need?
The proper slope is 1/4 inch per foot so about 1/8 total for a niche.
How big can an opening be in a load bearing wall?
Any opening that’s 6 feet or less can have just one 2×4 under the beam. This creates a bearing point 1.5 inches wide. Any opening wider than 6 feet should have a minimum of two 2x4s under each end of the beam. CLICK HERE to get FREE & FAST BIDS from local bearing wall carpenters.
Can I put a niche on an outside wall?
Generally frowned upon, installing a shower niche in an exterior wall is still possible.
Should you tile shower niche first?
This ensures any splashing or accidental spraying of water on the wall or shower door does not result in any seepage and water damage behind the tiles. If the niche needs to be tiled, then it has to be done tile by tile.
How do you seal drywall before tiling?
How do I prep drywall for a fresh tile installation? Fresh drywall needs up to a month before it’s ready for tiling, but when the time comes, you won’t have to tape the joints. All you’ll need to do is apply a skim coat and sand. Once done, clean the surface from dust, dry any signs of moisture and apply the adhesive.
Is a shower niche a good idea?
A shower niche is a much better solution, for relatively little expense. It’s an extremely useful feature that provides you with a proper place to keep your shower accessories, without adding bulky organizers that take up much-needed space.
Does a shower niche have to be centered?
I see no reason it needs to be centered. I would put it either on the same wall as the shower head, or on the back wall near the corner, to keep it out of the shower spray.
How much does it cost to install a wall niche?
What’s the cost to install a wall niche? The contractor cost to install a wall niche is $411 compared with doing it yourself for $225 and saving 45 percent.
Does a shower niche need a lintel?
Do I need a lintel above my shower niche? Yes. A lintel is always required above the shower niche, ven if you have solid brick walls.
What can I do about a curved wall?
Curved Wall Decorating Ideas Prepare Adequately. Taking time to explore options for the wall helps with designing the desired outcome. Paint Treatment. Photos or Art. Hanging Lights. Repurposing Curved Spaces. Curtain Calls. Making Tiles Turn. Malleable Moldings.
How is niche pronounced?
There is a debate about how you are supposed to pronounce niche. There are two common pronunciation variants, both of which are currently considered correct: \NEESH\ (rhymes with sheesh) and \NICH\ (rhymes with pitch). \NICH\ is the more common one and the older of the two pronunciations.
