QA

Question: How To Fly 3D

What is 3D RC flying?

3D Aerobatics or 3D flying is a form of flying using flying aircraft to perform specific aerial maneuvers. They are usually performed when the aircraft had been intentionally placed in a stalled position.

How fast can RC planes fly?

Off the shelf RC Planes can do anything from 30 mph to 150 mph, depending on their design, construction, and type of engine. To achieve even higher speeds, specialist design, and engine types need to be used – the current RC Plane speed record is 465.544 mph ( 749.221 km/h). Just starting out with RC Planes?.

How do you fly a rolling circle?

Start by simultaneously initiating a gentle right roll and smoothly applying left rudder into the turn. As the wing passes through knife-edge, start smoothly switching to right rudder. And when the wings reach knife-edge again, start smoothly switching back to left rudder.

Is RC flying dying?

Companies created around the concept of building R/C aircraft, like SIG, will die due to lack of sales. The R/C aviation hobby died for us years ago, and is, sadly, continuing to wither away.

What fuel do RC jets use?

RC glow engines use nitro fuel, a methanol-based fuel with nitromethane and oil added. The amount of nitromethane in the fuel is typically about 20% but could be anywhere in the 10% to 40% range or higher. Castor oil or synthetic oil is added to the fuel to provide lubrication and cooling.

Can I fly RC planes anywhere?

You can fly your rc plane or drone anywhere below 400 ft, so long as you’re not near an airport, a crowd of people or other sensitive areas, and you’re not infringing local laws. You can’t fly in National Parks, but you can fly in National Forests.

What is High Alpha Flight?

At slower speeds, an airplane must increase its alpha (point the nose higher) in order to continue flying in a straight line. High-alpha maneuvers are maneuvers performed at slow speeds with high angles of attack, close to a stall, demonstrating the aircraft’s maximum maneuverability at slow speeds.

What is prop hang?

Posted December 12, 2015. it’s playing helicopter, hanging in air before you lose all speed.

What is knife edge flight?

In traditional knife-edge, the aircraft is rolled approximately 90 degrees from upright level flight. Then altitude is sustained by using “top” rudder. When the maneuver is complete, the pilot will roll the model 90 degrees to return to upright level flight.

What is Fly mode in blender?

With walk/fly modes you move, pan, tilt, and dolly the camera around without any of those limitations. View Navigation. In the User Preferences editor select the navigation mode you want to use as default when invoking the View Navigation operator.

How do I center my camera in blender?

To center the view on an object in the scene: Make sure Blender is in Object Mode. Zoom out until the object is in the viewport. If any objects are selected, use A (or Select → Select/Deselect All) to deselect them. Select the object of interest by clicking RMB on it. Press Num. to center the view.

Does airplane mode do?

How to enable airplane mode. You can find a quick-access toggle for airplane mode within easy reach on almost any portable device. On iPhones and Android devices, you can swipe down from the top of the screen to find the airplane-shaped button.

How do I click and drag in Blender?

Shift +Middle-Mouse-Button click-hold drag (Shift+MMB) will ‘grab’ the scene and move it left-right or up-down relative to the screen. This type of movement is often referred to as a directional “strafe”.

Do I need a Licence to fly a RC plane?

You don’t need a licence to fly an RC plane recreationally in the US at the moment. But, depending on what country you live in, you may need to take an online test, and mark up your model so that it can be identified.

Do RC planes need to be registered?

Do I need to register my hobby RC airplanes or “toy” quadcopters? Yes. “Registration is a statutory requirement that applies to all aircraft. Any aircraft over 0.55 pounds and under 55 pounds qualifies and must be registered.

Can you fly RC planes in the winter?

Unlike some sports or activities you can do during the winter, RC involves a lot of standing still in one place. This can allow your body temperature to drop which really isn’t ideal for flying: physically and mentally, the cold can affect your reactions and ability to control the plane.

Is an electric jet engine possible?

You can’t have an electric jet plane. A jet plane would have a turbine engine and the whole principle of the turbine engine include a combustion chamber which mean that jet fuel is used in order to create combustion.

How hot do rc jet engines get?

Exhaust gas temperature (EGT) of model jets ranges from 500 to 700°C, close to that of full-size jets. If EGT rises much beyond this level, it can damage the engine.

How are RC jets propelled?

Model Jet Engine Operation In a centrifugal flow unit, air entering the turbine is thrown outwards as it passes over the spinning impeller, or compressor. The air hits against the inside of the body (can) at great speed and so gets highly compressed as it passes into the combustion chamber.

Can I fly an RC plane in my local park?

Depending on the size and type of your airplane, suitable locations include public parks, sports fields, ball parks, beaches, open hill sides. Above: public fields are great for flying rc airplanes, so long as it’s permitted. The crucial thing to remember when flying in a public area is safety.

How much space do you need to fly a RC plane?

How Much Space Do You Need to Fly an RC Plane? Specifically, unmanned aerial vehicle (UAV) safety guidelines recommend the following when flying indoors: The Flying Area should be no less than 20 ft (6 m) tall, 30 ft (9 m) wide, and 40 ft (12 m) long.

How long do electric RC planes fly?

Electric RC aircraft are not known for long flight times, with multirotors usually doing 20-45 minutes, while most fixed wings will struggle to get past two hours.