Table of Contents
What is the cheapest way to finish a basement?
Paneling can be used as an inexpensive way to finish you basement walls or ceiling. Use a strong adhesive to put strips of wood on your concrete basement walls, and then use wood screws that match your paneling to attach the paneling to the wood strips.
How can I make my unfinished basement look better?
Decorate It! The best way to make your unfinished basement feel complete is by adding accents and decor just as you would to any other room in your house. In addition to the basement ideas above, like hanging string lights and adding area rugs, bring in other details that will add warmth, texture, and ambiance.
How much does it cost to renovate a 1000 sq ft basement?
Expect to pay $7,000 to $23,000, or $15,000 on average, to finish a 1,000 square foot basement. Add around $6,500 if you want to hire an interior designer and another $2,650 for furniture.
What is the most expensive part of finishing a basement?
Framing an unfinished basement can be very expensive due to both the labor and lumber costs. Surprising to many, the cost of lumber can actually end up being the most expensive part of the project. One way to offset those costs is by using metal studs.
How much does it cost to frame and drywall a basement?
Framing: You should expect to spend about $1 per square foot to frame your basement. Drywall: It costs around $1.50 per square foot to hang drywall in your basement. Ceiling: Basic ceiling installation can cost as little as $1-2 per square foot. But, if the project is complex, it can cost around $6 per square foot.
How can I cover my basement walls cheap?
Fortunately, you can cover basement foundation walls quickly and inexpensively. Attach wood furring strips, Z-shape channels, or 2×4 studs to flat, dry masonry walls, then add insulation and cover the strips or studs with drywall.
What can I use instead of drywall in my basement?
24 Types of Drywall Alternatives For Your Wall, Basement, Ceiling, Shed Wood Planks. Plastic Panels. Plywood. Veneer Plaster. Pegboard. Lath and Plaster. Wahoo Walls. Textured Wall Panels.
How do I redo my basement walls?
Seal the Wall. Use a paint roller to apply the masonry waterproofing product you choose. Install Blocking Between Joists. Snap Lines on the Floor. Assemble the Walls on the Ground. Tip Up the Walls. Plumb the Wall and Secure the Top Plate. Build Out Around Windows.
Is it worth finishing a basement?
A finished basement can increase your property’s value by 70%. While a basement does not add to the overall square footage of the house, that fact is usually beside the point for homeowners. Finished basements often function as an informal living room/family room, office, home classroom space, and guest rooms.
How much does a finished basement add to home value?
The appraised value of finished basement space is generally 50% to 60% of the value of the main level square footage. To maximize the cost/value ratio, the market experts recommend keeping the basement budget below 10% of the existing home’s value. Staying between 5-10% is a good plan.
How can I save money to remodel my basement?
7 ways to save on your basement remodel Opt for an inexpensive, prefabricated egress window and well. Test exterior walls for moisture before finishing. Cut out some studs. Install drop ceilings. Skip the carpet and install luxury vinyl tile instead. Add a bathroom (or at least a half bath) near existing plumbing.
How much does it cost to put a bathroom in a basement?
Adding a bathroom in a basement costs $8,000 to $15,000 on average. You’ll save $500 to $1,000 if you have a rough-in drain already in place – typical in newer homes and usually near the main drain line.
How much does framing a basement cost?
The average cost to frame a basement is $1 per square foot for the materials and $2.70 to $3.39 per square foot installed with drywall and ready for painting.Cost to Frame a Basement. Square Feet Materials Cost Framed and Drywall Installed 1,500 $1,500 $4,575 1,800 $1,800 $5,490.
How much should I budget to finish basement?
Average Cost to Finish a Basement Type of Cost Cost Average Cost $18,400 Highest Cost $80,000 Lowest Cost $3,000.
Do I need a permit to finish my basement?
In most instances, you will need a permit to finish a basement. Many municipalities require permits for finishing a basement if you install a new wall. The definition of a wall includes installing drywall over a previously existing framed wall. Any type of plumbing, electrical, or HVAC work will also require a permit.
How long does it take a contractor to finish a basement?
Basement Finish Timeline There are several factors that come in to play when determining how long a basement will take to complete. However, it normally ranges from 4-6 weeks from the start of the project.
How do you make concrete basement walls look good?
If your concrete-block basement walls are dry and free of efflorescence or mold, you can seal them with a masonry sealer or all-purpose water-base primer-sealer and paint with a high-quality latex paint. Paint is an easy way to make the basement feel warmer, brighter, and more welcoming.
Is it OK to paint basement concrete walls?
Painting your basement walls can do more than just improve the look of your home; it can protect your foundation from water damage and moisture. For concrete walls, use a waterproof sealant to seal the porous material, and opt for a waterproof masonry paint to finish the job.
Can you live in an unfinished basement?
Sleeping in an unfinished basement is NOT safe long-term due to the risk of allergic reactions, lung cancer, carbon monoxide poisoning, breathing difficulties, and death via fires or floods. However, it’s possible to sleep in an unfinished basement for a night or two if proper precautions are taken.
