Table of Contents
STEP 1: REMOVE CARPET FROM STAIRS. Before anything can change, you need to remove the old carpet. STEP 2: REMOVE VARNISH FROM WOOD STAIRS. STEP 3: FILL IN ANY HOLES IN THE WOOD. STEP 4: SANDING THE STAIRS. STEP 5: STAIN THE STAIRS. STEP 6: PAINT STAIR RISERS.
What to do with stairs after removing carpet?
Hardwood Stairs Refinishing Process Remove any carpeting from the stairs. Remove all carpet staples. Strip the stain from the treads. Sand the treads and risers using an orbital hand sander. Hand sand the spindles, banister and around the base of the spindles. Vacuum and wipe down everything until the dust is gone entirely.
How do you refinish stairs from carpet to wood?
Replacing Carpet on Stairs With Hardwood Step 1: Remove the Carpet. Step 2: Remove Staples, Nails or Tack Strips. Step 3: Cut Existing Nosing. Step 4: Measure the Stairs. Step 5: Cut Riser Pieces. Step 6: Cut Tread Caps. Step 7: Attach Edge Moulding. Step 8: Measure the Tread Size.
How much does it cost to change stairs from carpet to wood?
Replace Carpeted Stairs With Wood Cost To start, removing carpet costs $75 to $300. A carpenter might not tackle this part of the job but you can hire a handyman for $60 to $65 an hour. Once the carpet is gone you’ll pay $100 to $200 per step. For 10 to 12 steps this costs $1,080 to $2,700, including carpet removal.
How can I refinish my stairs without sanding?
How to Refinish Wood Stairs without Sanding – The Process Step No. 1 – Cleaning the Surface. Step No. 2 – A Little Sanding Never Hurts Anyone! Step No. 3 – Dabbing the Surface Clean – Once Again! Step No. 4 – Taping the Sides of the Staircase. Step No. 5 – Applying the Stains. Step No. 6 – Let It Sit for a While.
How do you update stairs on a budget?
How to Refurbish Your Staircase on a Budget 2 – Replace your handrail. Replacing stair parts is an effective way of transforming your home without major disruption and expense. 3 – Replace worn treads and risers with oak stair clad. 4 – Get your paintbrush out. 5 – Use carpet. 6 – Stair Balustrade Kits. 7 – Paint your stairs.
How much does it cost to carpet 13 stairs?
Carpet installation costs $2 to $8 per square foot to replace. New carpet prices are $1 to $5 per square foot and the labor cost to install carpet is $0.50 to $1.50 per square foot.Carpet installation cost. Location Average cost to install 2,000 sq. ft. house* $2,100 – $9,000 Flight of 13 stairs $150 – $600.
How much does it cost to redo carpet stairs?
Carpeting on stairs is usually priced differently because of the specialized skill needed and additional tools. On average, you can expect to pay between $150 and $600 to carpet stairs, including new carpet for the landing. Some contractors will charge per step, and that ranges from $10 to $45 per step.
How much does it cost to redo my stairs?
Replacing your interior stairs will cost between $900 and $4,000, including installation. Higher quality materials and challenging projects could raise the price up to $10,000. If you don’t need a full-blown installation, repairing stairs or railings costs $310 to $1,000.
How do you refurbish a staircase?
Steps to Refinishing Your Stair Treads: Sand. Start by sanding down the treads to bare wood with the 80 grit sandpaper. Clean. Vacuum between passes, then wipe down the treads with a tack cloth. Sand again. Clean again. Treat the wood. Stain the treads. Apply the Finish. Sand, then repeat two more times.
Is it hard to remove carpet from stairs?
Removing old carpet from stairs may seem tricky, but it is an easy DIY project you can take on yourself. Once you’ve gathered all your tools, it’s time to get started.
What can I use to cover stair risers?
Install Tiles on Stair Risers You can install tiles on the risers of your interior stairs quite easily. If the size of the tile matches the height of the riser, you just need to attach the tiles to the risers—no cutting required. If you do need to cut tiles, you can cut tiles cleanly with a wet tile saw.
What do you cover stairs with?
Stair tread covers, or stair overlays, are handy products for improving the look and the slip resistance of existing stairs. Tread covers go right over the old step treads—the horizontal board that you walk on. Some covers also conceal the old step risers—the vertical boards between the treads.
Can new treads over old ones?
With the overhang removed, your new risers can go right to the top of the old stair. Use a generous amount of construction adhesive under each tread and riser. Affix a riser, then cap it by also gluing and screwing the tread down.
Can you install hardwood over carpet?
You can install Luxury Vinyl Plank (LVP) or laminate wood flooring directly over carpet with low pile height. Flooring professionals do not recommend the long-term installation of laminate or LVP over high pile carpet. You can secure plywood on top of plush carpeting to achieve stability in a pinch.
Can you just paint stairs?
Painting a staircase can be a simple DIY job. Use the best materials and start in the right place to spruce up treads and risers like a pro. Painting stairs is an easy DIY job that can totally change the look of your hallway or landing.
Is it better to stain or paint stairs?
Stains are generally more durable than paint, and lighter tread paints may begin showing scuffs and marks before stains or darker paints. Painting over dated, stained wood on spindles, risers, and handrails is one of the most cost-effective ways of transforming your staircase or stairwell.
What varnish is best for stairs?
Polyurethane Varnish – a clear water based polyurethane varnish is the simplest to use. Apply it with a brush but bear in mind it dries quickly so make sure you work fast. The second coat can be applied within 24 hours and it dries to a hard and durable finish.
