Table of Contents
Why is gas fireplace not working?
Check your breaker box and reset any tripped breakers you come across. Gas Valves: Make sure that your gas valve is open and in the on position to ensure the flow of gas to your fireplace. If turning the knob to the on position doesn’t open the gas flow, contact your propane supplier. The tank may be exhausted.
Why does my gas fire not ignite?
Gas fire thermocouple issues If your gas fire doesn’t turn on, it may be because the thermocouple isn’t quite in the right place and therefore, can’t interact with the other components as it should. If the pilot flame sparks but doesn’t stay lit, the thermocouple has likely worn out.
Why is my fireplace not working?
The thermocouple is a temperature sensor between the gas valve and the pilot light, and it will generate the electricity to ignite the gas when necessary. If the thermocouple is not screwed in properly, the fireplace won’t work. Check to make sure it is screwed in properly and placed correctly.
Can you repair a gas fireplace?
It can be done, but it’s worth looking at all options before committing to repair. Repairing your gas fireplace may be the better option if: The existing fireplace still fits your home aesthetically. There’s a minor mechanical problem or broken part.
How do you bleed air from a gas fireplace?
While pressing the valve control knob in, press the igniter button repeatedly until the pilot ignites. This could take anywhere from one to 10 minutes to bleed air out of the lines as the gas starts to flow. Once the pilot is lit, continue to press the valve knob inward for 30 seconds before releasing it.
How do you reset the pilot light on a gas fireplace?
While pressing and holding in the black knob, press the RED igniter button repeatedly; the pilot will generally light with two or three pushes on the igniter. 4. Once the pilot is lit, continue to hold the valve knob in for 30 seconds, then release the knob and it will pop back out. The pilot should remain lit.
Why does my gas fireplace shut off after a few minutes?
If you get dust in the pilot assembly and the pilot needs to be cleaned out, it produces a “lazy” flame, which will be disturbed by the draught of the main burners. The flame lifts away from the thermocouple and causes the temperature on the tip of the thermocouple to drop. This, in turn, makes the gas valve shut off.
What is the life expectancy of a gas fireplace?
Generally speaking, you can get a good ten to fifteen years of use before you need to replace your gas fireplace.
Do gas fireplaces wear out?
If you’re wondering do gas log wear out, the answer is yes. While you certainly won’t be replacing your gas logs as often as you would with real firewood, there comes a point in time where they’ll need to be swapped out with replacement gas logs.
How long does a gas fireplace insert last?
As with most things, how long your fireplace insert lasts will depend on how well you take care of it. However, when properly maintained, a fireplace insert can last 20-30 years or more, making them a great investment in the future of your home.
Why does my gas fireplace take so long to light?
Usually the problem is solved by having the fireplace cleaned and serviced, which takes about an hour of time. Most gas fireplaces do not have a thermocouple, they have a pilot generator which developed the voltage to turn the main burner on.
Can I light my gas fireplace with a lighter?
Flame-Lit Pilot Light Turn on the supply line to the gas fireplace. Light a match or butane candle lighter and hold it near the burner in the fireplace. Turn the gas key to release gas to the burner. Pull the match or light away when the burner lights.
How do you reset a gas fireplace after the summer?
Follow these steps to light and turn on a gas fireplace. If There Is A Glass Door, Open It. Set The Pilot Position To “Light,” Or Center. Push The Start Button While Lighting The Pilot With An Igniter. Hold The Gas Valve At The Light Setting For 30 Seconds Or Until You See A Flame. Set The Control To The On Position.
How do you prime a gas fireplace?
Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights. Depending on how long it’s been since the gas fireplace was last used, ignition may take multiple attempts.
What happens when gas fireplace pilot light goes out?
When the pilot light goes out, it does not leak carbon monoxide gas. Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds.
What happens if the pilot light goes out?
Can a Pilot Light Outage Be Dangerous? The worry here is that when a pilot goes out, the gas valve that supplies the fuel for the pilot flame could still be pumping gas. This can mean a buildup of gas, and when the pilot is relit or relights itself, it could result in a very serious explosion.
