Table of Contents
How does a push bar door work?
You simply push a rod, a bar or other activator, the latch mechanism is retracted and you are able to push the door open. A pair of arms that pivot on base plates at each side of the pipe or bar allow the panic device to operate and activate a latch retractor mechanism when pushed.
What is the push bar on a door called?
An exit device – sometimes called a Panic Device or a Crash Bar – is mechanical door hardware operated from the inside of an outswing exit door through the use of a crossbar or push rail and extends at least halfway across its width.
What are push open doors called?
A crash bar (also known as a panic exit device, panic bar, or push bar) is a type of door opening mechanism which allows users to open a door by pushing a bar.
How does a panic bolt work?
The Panic Bolt Unit eliminates the risk of impeding people’s escape, either by being unnecessarily complicated or not being readily capable of being opened, as it works by a simple spring loaded bolt which is held in place by a ceramic or glass tube that can be broken in the event of an emergency.
What is exit device?
An exit device (also referred to as a panic device, panic hardware, panic bolt and crash bar) is hardware that is installed on a door that keeps it locked from the outside, while allowing people on the inside to exit without unlocking it.
How do you operate a panic lock?
When a panic lock is used on emergency exits, it will have a spring-loaded metal bar fixed horizontally on the inside of the door. When the lever is pressed, it activates a mechanism that unlocks the door. Pushing on the bar will release the lock, making it easy to push the door outward and escape to the outside.
How do you make a dog panic bar?
The most common way to “dog down” or place the exit device in the unlocked mode is by pushing the bar, inserting and turning a “dogging key” into a hole on the interior bar of the exit device. The dogging key is commonly a hexagonal or “hex” key like the picture.
What is a panic set?
Panic hardware, also known as an exit device, panic bar, crash bar, touch bar or push bar, is designed to provide building occupants fast and easy egress in an emergency. Exit devices are required by building code and local fire departments for many public buildings.
What are panic bars used for?
Panic bars are the push bars installed on exit doors to allow quick exiting of buildings. OSHA requires a continuous and unobstructed path of exit to a place of safety. Panic bars provide this quick unrestricted egress.
What is a panic bar lock?
A panic bar is a hardware device designed to allow quick and easy exit during an emergency. Also known as a “crash bar” or “exit device,” a panic bar takes the place of a knob or lever lock, which may be difficult to maneuver in a panic situation. A panic bar can help people exit safely during an emergency.
What is tip on Blum?
TIP-ON BLUMOTION combines the advantages of the TIP-ON mechanical opening system with tried and tested soft-close BLUMOTION. Touch to open. Close with an energetic push (the TIP-ON function is activated and BLUMOTION cuts in for soft and effortless closing). What’s more, it works on a purely mechanical basis.
Can you put a panic bar on a glass door?
Panic Devices: Our modern, contemporary, PL-100 panic device is the perfect choice to meet Americans with Disabilities Act (ADA) regulations and secure your all glass emergency egress doors.
Can panic hardware go on any door?
Residential, business and mercantile occupancies such as apartments, office buildings or retail facilities typically would not require panic hardware on any doors unless there is an assembly, educational, or high hazard area within the building with an occupant load of 50 or more (per the IBC) or 100 or more (per NFPA.
What is a flush bolt?
Flush bolts are used to secure the inactive leaf of a pair of doors, projecting into the frame head and into a floor strike. Manual flush bolts and surface bolts are projected and retracted manually, and automatic flush bolts are projected when the active leaf closes and depresses a trigger on the edge of the door.
Do exit doors need panic bars?
Panic hardware is installed and used on doors as an exit device. International Building Code IBC only requires this type of hardware on buildings: with specific high-traffic or high-hazard occupancy, such as educational or assembly facilities with more than 50 people.
What is RIM device?
Rim exit devices are a type of panic device that is used on out-swinging doors. This exit device hardware can have trim or levers on the other side of the door. They can be labeled as fire rated or just labeled as panic hardware. Rim exit devices can be used on single doors as well as double doors.