Table of Contents
Pull out one bulb at a time, and stick a piece of folded up foil into the bulb socket. If the lights come on, you know that’s the bad bulb. If they don’t, put the bulb back in and move on to the next one.
How do you know which bulb is out on Christmas lights?
You can tell which bulb is out on your string of traditional Christmas lights by looking for the bulb that is “burned out” by looking at the tiny little filaments in the light bulbs to see which bulb is “burned out” or has lost it’s filament. Many times the bulb will be “smoked” as well.
How can I fix the shunt on my Christmas lights without a tester?
A faulty shunt may sound like a catastrophic failure, but you can often fix it with the LightKeeper Pro. Simply plug in the light strand and remove a bulb that’s in or near the dark section. Next, insert the tool into the bulb’s socket and squeeze the trigger to activate a piezo circuit.
How do you fix Christmas lights that won’t turn on?
Check the fuse or fuses from the plug at the end of the light strand (usually the glass-cylinder type with a wire filament). Use a small screwdriver to pop out the tab and open the plug. If the fuse is charred or burned out, replace it with a new fuse, and plug the light strand in your outlet.
Why does half a string of Christmas lights stop working?
If half a strand is working and the other half is not, you probably have a loose or broken bulb. Start with the first unlit bulb and work your way down, wiggling them to check for looseness. If it flickers, that’s your cue to replace it.
Why do Christmas lights all go out when one bulb blows?
In this setup, when a filament within any one bulb blows out, it creates an open circuit in the wiring. As we mentioned earlier, when a circuit is incomplete, or open, electricity fails to pass through any of the wire, causing all the lights to go out.
Why do Christmas lights have 2 fuses?
Typically, these strings of lights have two tiny fuses, one in each side of the AC line, located inside the AC plug. The fuses are intended to melt or “blow” before the copper wires in the string could melt or cause a fire from overload. Sometimes the instructions with the lights say, for example: “DO NOT OVERLOAD.
How do I know if my Christmas light fuse is blown?
Check the Fuses You can sometimes tell by sight if a fuse has blown; the metal filament inside the glass cylinder will have a break in it. Learning how to change a fuse in Christmas lights is simple: Open the sliding compartment door and remove the fuse(s).
Why did my string lights stop working?
Individual lights usually stop functioning for one of two reasons: they’re loose or they’re burnt out. When bulbs loosen from the string, they may disconnect from their housing. All you’ll have to do in that case is tighten them a little bit. They should turn back on as soon as they’re housed properly.
What kind of fuse do Christmas lights use?
Incandescent Mini Light Sets use 3 amp fuses. Heavy Duty light sets 5V use 3 amp fuses. C7, C9 light sets use 5 amp fuses. G40, G50 light sets use 5 amp fuses.
Do Christmas lights go bad?
Holiday lights, like a lot of things in your home, require maintenance and regular replacement. Do you know the life span of your lights? Incandescent bulbs should be replaced every 4-6 years. LED lights last a bit longer, for 7-10 years.
How do Christmas light fixer work?
The LightKeeper Pro Quick Fix Trigger sends a shaped, electrical pulse through the defective bulb, clearing the shunt. This allows it to operate properly. The current can then flow through the light set completing the circuit and illuminating the other bulbs.
What does a fuse look like when it is blown?
Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced. A reading of OL (Over Limit) definitely means a blown fuse. If the fuse is blown, replace the fuse with one that is exactly the same (see panel).
Do Christmas lights need both fuses?
Fuses are usually included with Christmas lights so keep them in a labeled bag ready for future use. Take a hard look and notice if contacts are present for both fuses or just one. After replacing the burned out fuse(s), shut the little fuse door and test out your lights. (Note, this plug only needs a single fuse.)Dec 6, 2018.
Can you use Christmas lights without fuses?
Christmas lights can blow, catch fire and can overload the circuit etc so must have fuses to take the force and thereby protect the instrument, the home, the family etc.
Why won’t my outdoor string lights turn on?
String lights often have fuses tucked inside the male plug end. To check the fuse, plug the broken lights into an electrical outlet that you know has power. Then, take a working string of lights and plug it into the broken set. If the lights on the second strand don’t light up either, the fuse is likely the issue.
