Table of Contents
What causes a furnace blower to stop working?
Sometimes the furnace blower isn’t working because the thermostat is set too low. Over the summer or more recently, someone may have accidentally lowered the thermostat temperature. Perhaps there is a wiring issue causing the blower to stop working. The motor might have a problem and requires service.
How much does it cost to replace a furnace blower?
How much does a furnace motor replacement cost? On average nationwide, a furnace blower motor replacement costs $400-$600, including parts and labor. A single-speed blower motor costs around $450 to replace while a variable-speed motor costs $600+.
How do you reset furnace blower?
How to Find and Reset your Furnace Motor Blower Step 1: Turn off the power to the furnace. Step 2: Remove the blower compartment cover. Step 3: Make sure the blower is completely cooled off. Step 4: Locate the reset button. Step 5: Press the button in (assuming that this is your issue and that the button has popped).
How do you know if your furnace blower motor is bad?
What Are Signs Your Blower Motor Needs to Be Replaced? Poor or Airflow from Air Vents. This will be the first and most obvious sign your blower motor has a problem. No Airflow At All From Vents. Skyrocketing Energy Bills. Strange Noises When You Turn on the Heat. Overheating Blower / Weird Smells.
Is there a reset button on a furnace blower motor?
Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.
How long do furnace blowers last?
Even though the manufacturer states their blower motor will last two decades, we advise all clients to expect a 10-20-year life span due to age, use, and proactive maintenance.
Can you repair a blower motor?
There are a number of things that can go wrong with your heating system, but if the air stops blowing altogether and the same is true on cold air settings, a blower motor replacement is likely in order. The good news is that it’s a fairly straight forward repair.
Is it hard to replace a blower motor?
If you don’t want to sweat or shiver, then find a good mechanic. The replacement of the blower motor is common and straightforward, so most shops will perform the repair — many on the same day.
Where is the reset button?
Alternatively referred to as the reset switch, the reset button allows devices that utilize it, such as a computer or peripheral to be rebooted. Usually, the button is on the front of the device, next to or near the power button.
What does a reset button look like on a furnace?
All furnaces are equipped with a reset button. They are generally red or yellow and are located inside the blower compartment. The reset button is a safety feature that will shut down the furnace when a problem is detected, often a hot or overheating furnace, before it trips the circuit breaker.
What does blower motor reset button look like?
If you use central heat and air, the button is likely located in the air handler’s compartment on the blower motor, and it will be either red or yellow. It usually lays flush with the surface of the blower motor until triggered by the internal overload protection circuit.
How do I get my furnace to kick on?
Furnace Won’t Start FAQs Check your circuit breakers. Check your thermostat settings. Ensure your furnace filters are clean. Check your pilot light. Check your blower motor. Check the furnace ignition switch.
How long does it take for furnace to reset?
Either way, restarting a furnace is a relatively simple task that takes no longer than 10 minutes to complete. Follow these steps to reset your gas furnace: Turn the circuit breaker off and switch the furnace power button off too. Never touch the breaker with wet hands and use only one hand to do it.
What happens when your blower motor goes out?
You might also hear ongoing whirring noises, or noises that change or get louder if you increase the fan speed. These are all signs of problems with the blower motor. In some cases, you may even notice smoke or smells of burning while driving, in which case you should pull over immediately.
How much does it cost to clean a furnace blower?
Cost to Clean Furnace Blower Item details Qty Low Unused Minimum Labor Balance of 2 hr(s) minimum labor charge that can be applied to other tasks. 0.0 h $0 Totals – Cost To Clean Furnace Blower 1 EA $130 Average Cost per Blower $130.28.
Why is my blower fan not working?
Make sure that the power cord hasn’t melted or a fuse hasn’t been blown. If your cables are looking fine, try unplugging the fan for a few minutes and then plugging it back in again. If unplugging and plugging your fan back in again doesn’t work, check the fuse box.
Where is the blower fuse located?
Many vehicles have two fuses for the blower motor, one in the interior fuse block and the other under the hood. The blower motor is usually under the dashboard on the passenger side.
How much does it cost to replace a blower resistor?
The average cost to replace the blower motor resistor at a repair shop is between $44 and $55 in parts and $70 in labor costs, for a total cost of around $114 to $125.
How long does it take to change a blower motor?
It takes between 45 to 90 minutes for a HVAC specialist to: replace the blower motor, adjust it, clean the fan, test it and assemble the furnace back together. The biggest challenge if you’re doing it yourself is getting the assembly out.
