Table of Contents
How long do ceramic tap washers last?
Ceramic tap washers can last years, but other types can last for as little as twelve months depending on how frequently they’re used.
Can you replace standard tap valve with ceramic?
Answer. Yes, it is straight forward to change a ceramic cartridge and full fitting instructions will be provided with your purchase.
How does a ceramic disc tap work?
Ceramic disc cartridges are simply two ceramic discs with holes through them. One disc is fixed in place whilst the other moves with the tap handle. When both discs are in alignment, the water is allowed to flow through the tap. When they are no longer aligned, the water stops.
Are ceramic tap washers better?
In place of the traditional washer, two ceramic discs are used, one of which is fixed, the other being turned by the levers. The tap only needs a 90-degree rotation, which aligns these two discs, allowing the water to flow. From a long-term maintenance point of view, ceramic disc taps are much better than normal taps.
Do ceramic disc taps wear out?
Ceramic disc taps are designed to last a lifetime. Unfortunately, in hard water areas they do not and it is as well to know how they operate and how to service them. It is very rare for the ceramic discs to wear out and the need to replace them is even rarer.
Why is my ceramic tap leaking?
Ceramic disc taps feature a cartridge within the tap that contain a pair of ceramic discs. If you do experience dripping this is usually caused by a scratched ceramic disc. In order to rectify the leak you must replace the entire cartridge as follows.
Why does my tap drip after I turn it off?
The faucet valve (working parts) is housed in the handle and controls the on/off, volume, and temperature control. Over time, a faucet valve can lose its ability to make a water-tight seal, so water will drip out even in the off position.
How do you remove faucet handles that have no screws?
If you can’t have it out with your plain hands, try using a pair of pliers or faucet handle puller. Pliers can scratch your faucet’s handle if applied directly. Wrap an old cloth or towel around the handle’s base then use the pliers. After removing the handle, you may find some mineral deposits.
Are all tap valves the same?
In the UK 95% of taps are either BSP 1/2″ (Basin size) or 3/4″ (Bath size). The BSP “British Pipe Standard ” doesn’t refer to any physical dimension, which is very confusing and is why we display all the dimensions in mm.
Is there a difference between hot and cold ceramic tap valves?
The Hot and Cold valves are the same, but open in different directions, so please select the valve you need according to how your taps work. If you have a two lever tap, the hot side has a valve and the cold side has a diverter.
Are hot and cold ceramic tap valves the same?
In other words both the Hot and Cold valves are the same but open in mirror directions so please select the valve you require according to how your taps work. If you have a two lever ‘filterflow’ or ‘aquifier’ tap then the hot side has a valve and the cold side has a diverter cartridge for the cold and filtered cold.
What is a spindle extender?
Spindle Extenders to extend wall spindle by 15mm to allow for proper tapware installation.
How does a tap spindle work?
How a water tap works. The flow of water is controlled by turning or moving the tap handle which is connected to the spindle. When moved, the spindle causes the tap valve to move upwards or downwards, causing the water chamber to open or close.
What is the best type of tap washer?
Nylon tap washers are a popular option for sealing tap valves closed. Due to their properties, nylon spacer washers provide a reliable seal on most types of tap. Typically, nylon sealing washers are chosen for offering: High strength.
What type of washer do I need for a tap?
Rubber tap washers are another popular choice for sealing many types of bath and sink taps. Sealing washers in rubber are sold at a wide variety of standard sizes – common requirements include the 15mm rubber washer, 1-inch rubber washer, 32mm rubber washer and 40mm rubber washer.
Do ceramic taps have washers?
Nowadays, the vast majority of modern bathroom taps use ceramic disc cartridges instead of rubber washers. In simple terms, this means no (or at least far fewer) leaks, and only a 90-degree rotation to turn the tap on or off. Back in days of old, taps and shower fittings always used rubber washers to prevent dripping.
Why do tap cartridges fail?
What is a ceramic disc cartridge? It is not usually the ceramic tap cartridges themselves that fail, however, as these tap cartridges are incredibly durable and designed to last a lifetime. Rather, it is the inlet or outlet seals falling apart or the build-up of sediment within them that creates leakages.
How long do bathroom taps last?
Most generally last for 15-20 years. If yours is nearing the end of its lifespan, it might be time to consider a replacement. If your faucet constantly needs repairs. One of the most common signs that it’s time to replace your faucet is when it needs constant repairs to function.
Do taps wear out?
Modern taps and faucets tend to be quite well made and can usually last around 10 years. When the finish starts wearing away and the handles become discoloured or cracked, it’s generally a warning sign that your taps washers, O-rings, screws, clips, and valve assembly might need replacing.
