Question: How To Finish A Basement Without Drywall

Table of Contents

The alternatives besides drywall or studs that can be used to finish your basement wall are wood planks, plastic panels, veneer plaster, wahoo walls, plywood, and pegboards. These options are easy to set up and maintain compared to drywall or studs that have problems with moisture and dust.

What can I use for basement walls instead of drywall?

After insulating your basement walls with closed-cell, injection-molded EPS foam panels from InSoFast, install your drywall, cement board, wood siding or other alternatives over the panels in the same exact way they are installed over traditional wood framing.

What is the cheapest way to finish a basement?

Paneling can be used as an inexpensive way to finish you basement walls or ceiling. Use a strong adhesive to put strips of wood on your concrete basement walls, and then use wood screws that match your paneling to attach the paneling to the wood strips.

How can I cover my basement walls cheaply?

Fortunately, you can cover basement foundation walls quickly and inexpensively. Attach wood furring strips, Z-shape channels, or 2×4 studs to flat, dry masonry walls, then add insulation and cover the strips or studs with drywall.

Do you have to drywall a basement?

As mentioned before, finishing basement walls without drywall will save you time (building and clean-up) and money in most DIY cases. If you go with the tips above, and have avoided using studs for your cellar walls, then you need some kind of wall cover to complete the basement wall remodel.

Can you finish a basement without drywall?

Is there a substitute for drywall?

Finishing-grade plywood with veneers such as maple or birch can be an excellent – and quick to install – alternative to drywall for wall finishing. Rather than using drywall compound and paper tape for joints, they are usually covered with a thin wood trim.

How much does it cost to finish a 1000 sq ft basement?

Expect to pay $7,000 to $23,000, or $15,000 on average, to finish a 1,000 square foot basement.

What is the most expensive part of finishing a basement?

Framing an unfinished basement can be very expensive due to both the labor and lumber costs. Surprising to many, the cost of lumber can actually end up being the most expensive part of the project. One way to offset those costs is by using metal studs.

How finish a basement easily?

Keep the ceiling exposed. This smart basement renovation reveals a key secret to enjoying a partially finished basement: Keep the ceiling open. Ditch the drywall. Capture the power of white. Establish a focal point. Get creative with paint and decor. Install cabinetry. Just do the basics. Dress up with shine.

How can I make my concrete basement walls look better?

If your concrete-block basement walls are dry and free of efflorescence or mold, you can seal them with a masonry sealer or all-purpose water-base primer-sealer and paint with a high-quality latex paint. Paint is an easy way to make the basement feel warmer, brighter, and more welcoming.

What can I do with unfinished basement walls?

Try these basement ideas to make use of the extra space in your home. Better Your Basement. 1/18. Lay Down Foam Mats. 2/18. String Some Lighting. 3/18. Throw Down Area Rugs. 4/18. Install Storage. 5/18. Paint Your Cinder Block. 6/18. Hang Curtains. 7/18. Create an Art Studio. 8/18.

How can I make my basement livable without finishing it?

SHARE Transform your basement into a living area, laundry, bathroom or workspace you can use now — without a full renovation. Keep the ceiling exposed. Ditch the drywall. Capture the power of white. Establish a focal point. Get creative with paint and decor. Install cabinetry. Just do the basics. Dress up with shine.

Can a finished basement have concrete walls?

Building new walls inside the existing concrete walls is the standard way of finishing basement walls. When insulating concrete basement walls (a good idea because concrete basement walls are often cold), use rigid foam board insulation if the insulation will come into direct contact with the concrete wall.

What is a cheap alternative to drywall?

Plywood is the cheapest alternative to drywall on this list and allows you to finish a room with a certain flair without taking on the expenses of wood planks, veneer or drywall.

Can I seal my basement from the inside?

Yes, it possible to do inside basement waterproofing. First, you need to figure out where the moisture is coming from. If after some time, you see moisture on the outside of the foil, this means your basement is collecting water via condensation due to high humidity.

Can you finish a basement in an old house?

Some basements are natural candidates for finishing. Others will require structural work before walls and plumbing can be installed. If the structure is old or poorly built, there may be issues with the foundation, ceiling height, electrical, plumbing, or other fundamental features.

Can Plywood be used instead of drywall?

Plywood is a viable alternative to drywall for walls and ceilings. If you are planning on redoing your walls or ceilings, the typical materials you’ll use include Sheetrock or finished plywood. Each has its benefits as a building material and in some cases, finished plywood is the better alternative.

Can you use foam board as drywall?

Rigid foam board, commonly called blueboard or beadboard, is commonly used as ceiling insulation. The most common way to hang drywall over rigid foam insulation is to glue and screw it into place.

Can cement board be used instead of drywall?

Yes, you can install cement board strips like you describe. I would leave an air gap at the top of the strip to prevent water/moisture from being wicked up into your gypsum board.