Table of Contents
Can you just fill a pool with dirt?
Backfilling a pool is the process of filling the empty space left by the inground pool with gravel, sand, or dirt. Backfilling is just one part of the pool removal process. The concrete floor and walls of the pool must be broken up and/or removed prior to backfilling.
Is it expensive to fill a pool with dirt?
Cost To Fill In A Pool With Dirt The average cost to fill in a swimming pool with dirt is $1,000 to $6,000, including delivery, labor, compacted fill dirt, and topsoil. Structural fill dirt costs $10 to $30 per cubic yard, depending on the amount needed.
What is the cheapest way to fill a pool with water?
The cheapest way to fill a pool is with your hose.
How much dirt do I need to fill in a pool?
For example if our pool is 30′ long, 20′ wide’ and 6′ deep, it has a total volume of 3,600 square feet (30x20x6). The total square footage divided by 27 is 133.33, this indicates that your pool will need 133.33 cubic yards of material to fill it in.
What do you do with a swimming pool you don’t want?
Here are three ideas for that unused pool: Remove it. The cost will depend on the size of your pool, and also on whether an earthmover can easily get into your yard. Retire it. Cover it temporarily.
Can you build a deck over a pool?
If your pool has outlived its usefulness and it would cost more to repair than you can afford, you can cover it. Building a deck over a pool presents a challenge similar to any raised deck, so be prepared for hard work, sore muscles and a great sense of accomplishment.
Should I put dirt around my above ground pool?
Do not attempt to install an above-ground pool below ground where all sides of the pool are surrounded by dirt. The weight of the soil when it becomes saturated with water will cause the walls to collapse. Many homeowners want to bury their above-ground pool to make it appear to be an in-ground pool.
Should I fill in pool?
A well-maintained swimming pool that does not have any leaks should not have to be drained or refilled every year—even every two or three years.
Is it cheaper to fill a pool with a hose?
Pool filling costs less than you think with all factors considered. The average homeowner uses about 12,000 gallons of water per month. Using that simple math, it stands to reason that your water bill will at least double when you fill your pool for the first time from a hose.
Is it OK to fill a pool overnight?
Before adding any water to your pool, you should make sure that the pool is clean and free of any loose debris. If necessary, clean the pool so that you will have clean water right from the start. It is never recommended to leave your home during this time or to fill your pool overnight.
How much dirt does it take to fill a 30000 gallon pool?
If a swimming pool can hold 30,000 US gallons of water – is it possible to calculate the number of yards of dirt it would take to fill the hole? 30,000 gallons = 6,930,000/46,656 = 148.5 cubic yards. The easy way to make this calculation is to have Google do it for you.
How many yard of dirt do I need?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.
How long can you leave an inground pool empty?
If ground water is not a problem a pool can be left empty for weeks or even months as long the hydrostatic relief in the bottom of the pool is open and functioning. If the time frame of the pool being empty gets into freezing weather there is real risk of freeze-thaw damage to surface of the pool.
Can you cover an empty pool?
Winter Pool Covers also offer protection for an empty pool. Made out of polypropylene fabrics and double webbing, they offer safety and keep most debris from even getting into the pool. The mesh fabrics will still allow water to get through the cover and will need to be pumped out from time to time.
What to put in a pool when you first fill it up?
Chemicals Needed for Pool Start Ups Stain & Scale Preventer. Granular Shock Chlorine. Chlorine Tablets. pH Increaser and/or pH Decreaser. Alkalinity and/or Calcium Increaser. Cyanuric Acid (Stabilizer) Algaecide and Clarifiers if needed. Complete Test Kit or Test Strips.
How do I start my above ground pool for the first time?
Step 1 – Clear off the water, debris and anything else from the pool cover. Step 2 – Remove the pool cover. Step 3 – Pull the winter plugs and accessories out. Step 4 – Top up the water in your pool. Step 5 – Reinstall the pool ladder. Step 6 – Prepare the pool filtration system. Step 7 – Power your filtration system up.
How soon after filling an above ground pool can you swim?
Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you’ll only be adding liquid chlorine, it’s generally safe to swim after about 4 hours or until levels are 5 ppm or lower.
