Table of Contents
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.
How do you calculate fill?
Calculate the amount of fill needed with this formula: Width x Length x Depth divided by 27. All these dimensions should be calculated in feet. For example, to find the volume of an area 25-feet wide by 36-feet long with a depth of 3-inches, enter 25 x 36 x . 25 (3-inches is .
How do I calculate yards of dirt?
Cubic yards are used to measure the materials we provide, such as topsoil, sand, pit run, and gravel. We’ll need to know how many cubic square yards of the product you will require for your project. This is the basic formula: length [ft] x width [ft] x depth [ft] = cubic sq.
How do you calculate the area of a filling?
Area of the plot = Length x Width = 40 x 30 =1200 sft. Suppose we need to fill the plot by 3’5” = 3.41 feet. ∴ Depth of the plot = 3.41 feet. Volume of plot to be filled = 1200 x 3.41 = 4092 cft.
How do you calculate cubic yards?
You can easily calculate cubic yardage by converting all three dimensions of your material into yards and multiplying them. For example, if you dig up a flower bed that is 9 feet long, 3 feet wide and 12 inches deep, you will have one cubic yard of dirt.
How do I calculate how much dirt I need to fill a hole?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.
How do you calculate backfill and excavation?
Backfill for Figure 3.1: Backfill volume = excavation volume – footing volume – wall volume. (Note that only the portion of the wall that is in the trench is deducted, so the height of wall in the trench is the average trench depth minus 2′-0” for the footing: 6′-0” – 2′-0” is 4′-0”) Backfill volume = 207.4 cubic yards.
How do I figure out how many cubic feet of soil I need?
How to Calculate Cubic Feet for Soil Use a measuring tape to determine the length of the location where you will be placing the soil. Measure the width in feet. Determine the necessary depth of the soil in feet. Multiply the width by the length by the depth to find the number of cubic feet of soil you need.
How many wheelbarrow loads are in a cubic yard?
Depending upon your wheelbarrow size (i.e. 2 or 3 cubic feet per wheelbarrow load), it will take 9 to 14 full loads to equal 1 cubic yard.
How many yards of dirt are in a truckload?
Dump Truck Cubic Yardage – The Basics While there is room for variance, most full-size dump trucks have a capacity of between 10 and 16 cubic yards.
How do you calculate fill volume?
Rectangular Area Measure the length, width and depth of the area you want to fill with dirt. Calculate the volume of dirt needed to fill the area you measured by multiplying length (120 inches) by width (60 inches) by depth (30 inches). Convert cubic inches to cubic yards by dividing by 46,656 cubic inches.
How do you calculate sand fill?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.
Is 1 yard the same as 1 cubic yard?
Under the United States’ Customary System, 1 yard is equal to 3 feet or 36 inches. And a cubic yard is the volume of material that fits in a space that is 1 yard wide by 1 yard deep by 1 yard high. This is important because quite a few common materials are measured in cubic yards — here are some of them: Concrete.
How many bags of dirt are in a cubic yard?
bags 27 bags # Cubic Yards Needed Bag Size .75 Cubic Feet 1 Cubic Foot 1/2 Yard 18 bags 14 bags 1 Yard 36 bags 27 bags 3 Yards 108 bags 81 bags.
How do I calculate how much stone I need?
In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This number is how many cubic yards of crushed stone you need.
How do I figure out how many yards of dirt I need for a pile?
Calculating the cubic yards in a pile of dirt first requires the homeowner to figure the size of the cone using this formula: V = 1/3 * π * R² * H. V = the volume in cubic feet. π = 3.14159265. R² = length B divided by 2. H = Height.
How many yards are in a ton of dirt?
How much is a ton of soil? A ton of condensed soil is typically about 0.750 cubic yards (3/4 cu yd), or 20 cubic feet.
How much dirt does it take to raise 1 acre of 1 foot?
So, if you dig 1 foot deep over an acre, you get 43,560 cubic feet of dirt. If you dig 5 feet deep, then you have 5 times this amount of dirt. If you dig 5 feet of dirt out of 50 acres, then you have 50 times as much dirt as if you did that over 1 acre.
