Table of Contents
The basic calculation for board feet is: Thickness x Width x Length / 12 = Board Feet. 2 x 4 x 10 / 12 = 6.667 Board Feet. A 2 x 10 -16′ has 26.67 board feet: 2 x 10 x 16 / 12 = 26.667 Board Feet. PCS x T x W x L / 12 = Board Feet. 84 x 2 x 8 x 12 / 12 = 1,344 Board Feet. 1.25 x 6 x 14 / 12 = 8.75 Board Foot.
How do you figure board feet in lumber?
How do you measure a board foot? Take a rectangular piece of lumber. Measure the length of it in feet, rounding to the nearest decimal place. Measure the width in inches. Measure the thickness in inches. Multiply all three numbers together and divide by 12.
How many board feet are in a 2x4x10?
A 2x4x10 board has 6.66667 total board feet in it: the board foot factor (BFF) of a 2×4 is 0.666667. Multiply 0.66667 by the length of 10 which gives total board feet of 6.66667.
What is 200 board feet in square feet?
A 600 board foot kit will cover 600 square feet at 1 inch thickness or 300 square feet at 2 inches thick; a 200 board foot kit will cover 200 square feet at 1 inch thickness, and so on.
How many board feet are in a 1×8?
1” x 8” x 1′ = 0.67 bd. ft. 1” x 10” x 1′ = 0.83 bd.
How do you figure board feet in siding?
Estimate the number of linear feet of siding needed by multiplying the width of the wall in feet by the number of courses. Boards are most commonly sold in 12′ lengths, though 16′ and 20′ lengths can often be ordered. Divide the linear footage by 12′ to find the number of boards needed to cover the wall.
What is linear board feet?
Linear feet (LF) is a measurement of length of a specific sized board. Board feet (BF) is a measurement of volume which the a Board foot is 1 foot by 1 foot by 1 inch thick volume. Nominal Size. Lineal Feet (LF) Board Feet (BF)Jul 21, 2015.
How many board feet are in a 4×8 sheet of plywood?
Find the square footage of each space and add together to find the total square footage needed. Divide by the total square footage by the square footage of a sheet of plywood to find the number of sheets required to cover the space. A 4×8 sheet of plywood is 32 ft2.
How do you calculate wood for a project?
TIP: To calculate board feet: rough standard thickness X actual width X actual length divided by 144. Use the thickness of the material you intend to start with, not end with. For example, the 3/4″ top will start from 4/4 lumber. The legs will start from 6/4 lumber.
How do you calculate lumber for a project?
You can measure board feet by multiplying length x width x thickness in inches, and then dividing by 144. If ordering a large amount by board feet, just multiply the total board feet needed by the price per board foot for the total cost.
How do I calculate board feet in Excel?
Here is the relation: 1 board foot = 144 cubic inches = 1/12 cubic foot. Board foot formula = length * width * thickness. board foot = length(ft) * width(in) * thickness(in) / 144. board foot = length(ft) * width(ft) * thickness(in) / 12.
How many square feet are in a 12×12 room?
How many square feet is a 12×12 room? The square footage of a room 12 feet wide by 12 feet long is 144 square feet. Find the square footage by multiplying the width (12 ft) by the length (12 ft).
How many sq ft is a board foot?
A board foot is actually a measure of volume. By definition, a board foot is one square foot, one inch thick. The most common mistake made in calculating board footage is forgetting to multiply by the thickness.
What does 600 sq feet look like?
So what does 600 square feet actually look like? If you can’t quite visualize how big 600 square feet is yet, no worries. Six hundred square feet is about the size of a standard three-car garage that has enough space to park the cars and walk around comfortably.
What is a board foot measurement?
1. Hardwood lumber is typically sold by the board foot, a unit of volume equivalent to a board that is one inch thick, one foot wide and one foot long, or 144 cubic inches.
How many board feet do I need to build a house?
House Construction To keep it simple and stick to a good average, say that 6.3 board feet are required for every square foot of house. So, a 1,000 square foot home would need 6,300 board feet to complete, while 12,600 board feet would be necessary for a 2,000 square foot home.
How do you calculate wood siding?
Follow these steps for calculations you’ll use to learn how to measure for wood siding: Measure height and width of each side. For each side, multiply height times width to get the total square feet. Measure other areas not included in the sides, such as gables, dormers and more.
How many shiplap boards do I need calculator?
To calculate the area of this shiplap, we multiply the length and width and then divide by 144 to get the result in square feet. You should then round up to at least 258 boards.
Why do you think it is important to calculate the board feet of a lumber?
Accurately counting and estimating hardwood lumber is a critical calculation. Thus, knowing the board foot formula is extremely important. When lumber is miscalculated, bad things happen: Customers are over charged.
How do you calculate board feet in the Philippines?
The formula is (Width x length x thickness) / 144.
What is the difference between lineal feet and board feet?
Lineal Foot – A lineal foot one is 1 foot in length or 12 inches. It is a measurement of a straight line. A board foot is one square foot, one inch thick. To calculate board foot = width in inches x length in feet x thickness in inches.
