Table of Contents
Before beginning any excavation, call 811 to check for underground utilities. Mark the Fence Layout. Before you can dig post holes, you need to lay out your fence area. Dig the Post Holes. Install the Posts. Install the Post Hardware. Install the Fence Rails. Hang the Fence Fabric. Attach the Gate.
How deep should chain link fence posts be?
The answer -— as it often does in fencing construction — depends. As a general rule, Fencing Direct recommends at least a 24-inch footing depth for a 4-foot fence, plus an extra 3 inches for every foot of height (for example, 27 inches for a 5-foot post).
Do you have to cement chain link fence posts?
You can install a chain link fence without using concrete, but it is not recommended. Anchoring each fence post in concrete is the best way to ensure your fence will stand straight and tall for many years.
What do you put on the bottom of a chain link fence?
Install Tension Wire at the Bottom of Your Fence. Tension wire is a relatively simple solution; it’s a wire that runs along the bottom of your chain link fence. It keeps tension at the bottom of the fencing to prevent an animal from pushing through. The tension wire runs between all of the posts and the chain links.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
Do I need a top rail for chain link fence?
Corner or main posts (galvanized pipe) provide the basic support for a chain-link fence. Top rails run the continuous length of the fence between the main posts. For residential use, 1-3/8 inch diameter pipe is strong enough.
How deep should metal fence posts be buried?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How do you dog proof the bottom of a chain link fence?
Install tension wire on the bottom of the fence line. This wire reinforces the bottom of a chain link fence and helps prevent the bottom from ‘pulling’ up if an animal tries to push the fabric out and away from the fence line.
What can I put on the bottom of my fence to keep my dog in?
You can use chicken wire, hardware cloth, or a piece of chain-link fence attached to the base of the fence. Some people bury it for aesthetic reasons. But you can also lay it on top of the grass and hold it down with rocks, gravel, mulch, or even planters. Pour a concrete footer.
What is tension wire for a chain link fence?
Tension wire is an important part of chain link fencing. It secures the bottom and top of your chain link fence to ensure the chain links remain tight to the posts and rails.
How many bags of cement do I need for a fence post?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post.
Why do posts need to be below the frost line?
When the outdoor temperature drops below 32 degrees F, the moisture in the ground begins to freeze, starting at the top. As you know, the upper level of soil gets rock hard, so that you need a pick to chip through the top layer if you have to dig a hole.
Can you curve a chain link fence?
Chain link is just not the ideal fence for small radius’s, more post will produce a smother curve . They can be at any center you want, as long as its under 10′.
What type of pipe is used chain link fence?
065 wall galvanized framework, or ‘Tubing’ as we refer to it as, is the most popular grade of galvanized round tube used for our residential grade chain link fence systems.
Should chain link fence touch the ground?
Generally, it is not recommended for a chain-link fence to touch the ground. Ground contact makes the bottom of the fence more vulnerable to corrosion. It can also make yard maintenance more difficult. The fence touching the ground can prevent rodents and other small animals from getting inside for garden areas.
Should a fence be level or follow the ground?
However, a level lot makes fence installation easier, which appeals to DIY novices. To make this decision, consider your land’s degree of slope. If there’s only a slight incline, leveling the lot makes sense. However, if your yard features a more drastic incline, consider working with the land’s natural topography.
How do you build a fence if you can’t dig?
If you need a temporary fence or a border that you can move as needed, a quick way is to use concrete blocks. Attach a bracket to a concrete block that is heavy enough to hold the wood or other material you plan to use to build the fence. The posts can be mounted to the brackets and the fence finished from there.
Can you put up a fence without digging holes?
Do-it-yourself homeowners across the country are now installing sturdy vinyl fences without digging holes, making a mess of the yard or pouring concrete. No-dig vinyl fence systems are installed by driving pipe deep into the ground using a post pounder.
How do you install chain link fence anchors?
Anchors simply slide over top of post and get positioned at base of post, position parallel to fence line. Drive anchor slightly below ground surface with a small 1-2 lb. sledge hammer or spud bar. It is still recommended that your ‘pull’ posts such as end, corner, and gate posts are cemented in place.
