Table of Contents
What can I use instead of epoxy on tumblers?
Brite Tone – If you want ONE item to use instead of epoxy, this would be it. You want to use Brite tone on every single cup. It is the best quality top coat they have that once it is cured, is shinier and more durable than epoxy!.
Can you use epoxy without a spinner?
Is there a substitute for epoxy?
Hard plaster and concrete are excellent epoxy resin alternatives, and their use is not limited to small surfaces only. Unlike epoxy resin, concrete and plaster can be easily applied to large surfaces as well. Other great alternatives to epoxy resin include slush latex, metal, plastic, and alabaster.
Can I use Mod Podge instead of epoxy?
Paper Mod Podge does all that wonders for you. It works as a sealant to your projects, you can gluwork your project with some classic mod podge and then use the Super Gloss over the top. So it gives you a very shiny, clear finish that looks like epoxy.
Can you use Mod Podge instead of epoxy on tumblers?
Make sure to remove the tape before the Mod Podge dries! A way to make a decorated Yeti cup or Ozark tumbler without having to use epoxy. As you can see from the pictures, it’s not as smooth as epoxy but it still works and actually has a nice texture to it!.
Is there a natural alternative to epoxy resin?
EcoPoxy. EcoPoxy resin is a plant-based alternative to epoxy resin that is great for crafting with. It is certified as a BioPreferred Product by the USDA. There are different colors and finishes available as well.
Is there a safer alternative to epoxy resin?
EcoPoxy offers an eco-friendly alternative to other epoxy resins on the market. The safe, environmentally friendly range are low odour, plant based epoxies that are 100% solid and require no ventilation when using.
How do you keep vinyl from peeling off tumblers?
Before you start, make sure your stainless steel tumbler or mug has been cleaned and dried. And clean the cup with rubbing alcohol. This helps to remove any remaining grease or residue that will prevent the vinyl from adhering properly. Let the vinyl cure on the cup for 48-72 hours to make sure it sticks well.
How much epoxy is needed for a tumbler?
Second, you will want to add an mL of resin for every ounce of the tumbler (for example, mix 20 ml for a 20 oz tumbler and 30 ml for a 30 oz tumbler and so on) to ensure you have enough resin for your tumbler.
How long should epoxy Cup Turner?
Once all epoxy is on the cup keep the cup spinning. Wait about 5-10 minutes and carefully (and with gloves still on) remove the tape from both the top and bottom. If you leave the tape on you’ll end up sealing it under the epoxy layer. Let the tumbler turner spin the cup slowly for 6-8 hours.
When can I stop spinning my tumbler?
Keep spinning until the resin left in your mixing cup seems set enough not to run. The Spin It is not designed to rotate more than 6 hours at a time, however. Once set up, you can stop the spinning but leave your epoxy tumbler on the machine. You will want it to continue to cure without touching the surface.
What is tumbler Turner?
Consider picking up a tumbler turner—a relatively small and convenient machine that enables you to decorate cups by pouring, drizzling, or painting tinted resin on them. You can buy just a turner, but a more economical option is to purchase a kit that also comes with materials for mixing and applying resin.
How long does it take an epoxy tumbler to dry?
General about Epoxy Resin Dry Time Usually, it takes around 72 hours to fully cure the epoxy. Whatever the dry time, the resin should be allowed to fully cure before attempting to move or sand it. If the epoxy isn’t allowed to rest until fully cured, your project will be prone to surface contamination.
Is liquid glass the same as epoxy resin?
Not only can you pour Liquid Glass Deep Pour Epoxy thicker at 2-4 inches and higher, but it is harder, to protect it from damage, more heat resistant to prevent warping, and more stable, to provide a strong structure with no flexing. These attributes are what differentiates Liquid Glass from the competition!.
Is resin and epoxy the same thing?
The most obvious difference between the two is the intended use. Epoxy resins are meant for coating applications whereas casting resins are meant for casting applications such as molds, figurines, & jewelry.
What’s the difference between epoxy and epoxy resin?
Summary: When it comes to forming strong bonds, both epoxy and resin glue can be strong, but epoxy is stronger. The main difference between both adhesive types is the drying time. Both epoxy and resin adhesives require mixing before use, but epoxy hardens much faster than resin glue.
Can Polycrylic be used on tumblers?
Simply brush the polycrylic on your cup in nice up and down strokes. I usually remove the paper and stick my fist inside the cup so that I can rotate it around and paint the sealer on the cup all at once. After your final coat, you will let your cup dry for 24 hours before you are able to use it.
Do I need to seal vinyl on tumblers?
I do not seal my vinyl on tumblers. Most vinyl manufacturers actually recommend that you don’t apply a sealer over the vinyl. The exception to this would be if you want to go through the process of sealing your tumbler with epoxy. This is usually done with glitter tumblers.
Can you put Mod Podge over vinyl on tumblers?
Just adding vinyl to mugs and wish they would last a little longer? Mod Podge is probably your safe bet, just don’t put them in the dishwasher.
