Table of Contents
How do you hide the claw on a clawfoot tub?
If you want to hide the supply lines from view, bring them out low and then up towards the fixtures. Visually the clawfoot tub will appear uncluttered with plumping from certain angles.
Does shower curtain go inside clawfoot tub?
When it comes to your clawfoot tub, the average shower curtain just won’t cut it. Yes, it should be made from a durable, waterproof material that you like the look of (just like any other shower curtain), but it also needs to be larger, heavier, and more secure to wrap around and stay put.
Does a clawfoot tub need AP Trap?
Not lavs. A claw foot tub has the p-trap below the floor. If you are using a slip joint waste and overflow, the theads are about at floor level which puts the slip joint nut accessible from above.
How much does a clawfoot bathtub weigh?
Bathtubs of all kinds are heavy. A clawfoot tub can be made from acrylic, but a classic clawfoot tub is made of cast iron with a porcelain finish. An empty cast iron tub can weigh between 200 and 400 pounds. Add water and the weight on the floor will increase to between 500 and 900 pounds.
What can I do with an old clawfoot tub?
The tub can be used as a planter, outdoor furniture, indoor furniture and many other transformations. Turn it into a planter in your garden. Transform it into an outdoor sofa. Transform it into a chaise lounge. Turn it into a couch. Upcycle it into a chair. Transform it into a coffee table and planter.
Can you refinish a cast iron tub?
What is Cast Iron Tub Refinishing? Bathtub refinishing involves sanding down the tub’s surface, filling in cracks and applying several coats of primer before rebuffing. It keeps construction materials from landing up in a landfill and costs less than replacing the tub entirely.
Do clawfoot tubs have lead?
100% of the clawfoot bathtubs we tested had extremely high levels of lead leaching from the surface.) Simply touching or wiping the side of these leaded fixtures is enough to transfer a residue of lead from the surface to the hand. On these tubs, the surface will leach lead during normal use.
How much does it cost to have a clawfoot tub refinished?
The average cost to refinish a clawfoot tub is $300 to $650, depending on the size and condition. Clawfoot tub issues such as erosion, rust, pinholes, scarring, lead paint, or chips need to be addressed before reglazing. Refinishing takes 4 to 5 hours and typically comes with a 3 to 10-year warranty.
What style is a clawfoot tub?
Clawfoot tubs come in several styles, the most common being the classic roll rim or roll top. A slipper tub is the most elegant of the clawfoot tubs, having one end raised and sloped for a more comfortable reclining position. Double slipper tubs have both ends raised.
What kind of shower curtain do you use for a clawfoot tub?
Cotton is also a good choice, most especially if you want your bathroom to feel dressier. It is soft, easy to clean, and durable. You will need a liner for a cotton shower curtain for a clawfoot tub so it doesn’t soak up water.
Can you paint a claw foot tub?
Using a high-quality bonding primer, apply a light, even coat to your entire surface. Paint the tub. Once the primer is dry according to package directions, apply a high-quality water-resistant paint. Oil based paints or exterior paints are a good choice for withstanding the damp bathroom.
What can I use instead of AP Trap?
Bottle traps have a horizontal waste water exit with a lower half that unscrews to allow debris and clogs to be removed. Bottle traps take up less room under the appliance than P- or S-traps, making them appropriate for tight spaces. Thes traps catch the first and debris the same way as a p-trap.
Does a free standing tub need AP Trap?
Each freestanding tub needs one p-trap. 1. If the room is too dry the water-seal will evaporate from p-trap.
Will my floor hold a clawfoot tub?
In general, unless there is something wrong with the joist spacing or the wood has rotted, the framing in most houses should be able to support a standard size cast iron tub with no problem.
Does a clawfoot tub add value to a home?
According to the RealEstate.com survey, starter homes with claw-foot tubs sold for nearly 30% more than expected. Coffered ceilings also helped homes sell for 30% more than expected, and farmhouse sinks (thanks Joanna Gaines) helped homes sell for 26% more than expected.
How much room do you need for a clawfoot tub?
How big is a clawfoot tub? Typically, a clawfoot tub is generously sized. Ensure that the tub you want will fit through all doors, halls, and stairwells to get into the bathroom, and allow for at least 3-6 inches of space on each side of the tub.
How much do old cast iron tubs weigh?
Cast iron bathtubs typically weigh between 240 and 500 pounds; however, the actual weight depends on the size and type of bathtub. Alcove cast iron bathtubs are usually 60 inches long, hold 32 gallons of water, and weigh 320 pounds on average.
How do I dispose of a cast iron tub?
While cast iron is not as valuable as other metals, it is being recycled. In some areas the local trash pickup will pick up large items for an extra fee or for free depending where you live. Remove all the surrounding walls and disconnect the plumbing first.
Is a cast iron tub worth it?
Cast iron bathtubs have some of the best positives over many bathtubs on the market. Their only drawback is their immense weight which makes it not an ideal choice for many homes as the weight can be staggering for a bathroom to support. So make sure your home can support one before purchasing.
