Table of Contents
If you want to drain the water from your OOLER Control Unit, unplug the 6-foot tubes from the OOLER Control Unit. Carry the OOLER Control Unit over to a sink or a bin and then insert the drain key provided with your OOLER. Water will begin to flow out.
How do I drain the water from my Chilipad OOLER?
How do I drain the water out of my pad? If possible, hang the pad vertically with the connection tubes at the bottom. Using two pens, pencils, or other similar tools, depress the “X” shaped pieces inside the connector end, which will open the valves and allow the water to fall out.
How do you clean an OOLER?
To wash the OOLER Hydronic Pad, use a front-loading washing machine (one without an agitator). Secure the pad tubes with a thick rubber band, rope, etc. Wash with cold water on a delicate cycle. To dry the pad, keep the pad tubes secured and dry on a delicate cycle with no heat.
Does the OOLER need to be cleaned?
When your OOLER Control Unit is in use, the water in the Unit will be periodically cleaned by an automatic UV light cleaning cycle. The UV light helps prevent bacteria growth inside the OOLER system. For extra care, consider performing a Deep Clean periodically. (Distilled water is recommended).
How often do you clean OOLER?
Keep your Cube or OOLER in top shape with the ChiliSleep System Cleaner! The System Cleaner contains a special mix of essential cleaning ingredients. Simply pour the solution into your control unit every 1-3 months for optimal sleep system performance.
Why is my Ooler leaking water?
Most often, water leaks are caused by cracks and holes in the water jug, not the cooler itself. Sometimes when the jugs are being transported, they incur damage resulting in tiny cracks or holes. Other times, when the air pressure of a jug changes, it may start to leak.
Is Ooler better than ChiliPAD?
Ooler Has Better Design than ChiliPad Finally the last major difference I’ve found between the Ooler Sleep System and a standard ChiliPAD is the design. The Ooler is a little bit sleeker and slightly shorter making it easier to fit under your bed.
How does the Ooler work?
The Ooler pad connects to a little shoebox-sized cooling device with some rubber tubes. Here’s how it generally works: The box cools a tank of water, and then sends the cooled water through the tubes, which are woven through the mattress pad. It all looks a bit laboratorial, until you throw a fitted sheet on top.
How much power does Ooler use?
The Control Unit Cooling heating range 55-110°F (13-43°C) Connectivity Bluetooth App compatibility iOS and Android Power: 100~240VAC, 50/60Hz, 140W Energy consumption ~500kWh/year.
Is Ooler noisy?
Is the OOLER system loud? Yes, the control unit (which controls the temperature of the water and then sends it through the tubes into the mattress pad) is far from silent. If you are someone who sleeps well with white noise (and I think most of us do), you’ll find that the OOLER creates a welcome kind of white noise.
Can I use hydrogen peroxide in my Chilipad?
Periodically Pour one cap full of hydrogen peroxide into the reservoir to keep the circulation system clean. Procedure: Set temperature to 75 degree F. Remove the reservoir cap, and add the Hydrogen Peroxide.
Does the Ooler leak?
The replacement base tub doesn’t leak, which is a big improvement, but it also doesn’t seem to be able to hold its temperature at times. The Ooler sleep system can range from 55 degrees up to 115 degrees fahrenheit, and when I set it to 55 degrees the water rarely reaches that temperature.
Why is my arctic air spitting water?
Water leaking from the air cooler may be the result of a simple over-filling of water, or it may be because the reservoir is broken or was not attached properly. It could also be because the water-soaked honeycomb pad is broken and thus could not hold in the water.
Why does my refrigerator leak on the floor?
A blocked defrost drain is one of the most common causes of water leaking from your refrigerator and is a good place to start troubleshooting. When enough water builds up, it starts leaking out of the refrigerator and onto the floor. Clear the drain by flushing it with hot water.
Is a cooling mattress pad worth it?
Who should buy a cooling mattress pad? Some people sleep hot regardless of the season or local climate, and an uncomfortable temperature in bed may impact overall sleep quality. A cooling mattress pad can help maintain a comfortable temperature for hot sleepers and help them rest soundly throughout the night.5 days ago.
Is ChiliSleep loud?
The Cube will make a slight humming sound while it is operating. However, a majority of our customers have reported that the noise does not bother them as it is comparable to a floor fan.
How do you know if Ooler needs water?
The control unit has a small display on the top that shows the current temperature of the pad, along with a Bluetooth connectivity icon and if needed, a water refill warning light.
Does the Ooler heat?
Product Overview. Ooler is an advanced sleep system for precise temperature regulation for your bed. With a thermal range from 55-110°F (13-43°C). Ooler is a water-based system consisting of a control unit and mattress topper which incorporates thin circulation tubes for accurate climate control throughout the night.
Is the Ooler comfortable?
Conclusion. For me, the OOLER system delivered on its promise to provide a long, restful night’s sleep. The ability to automate the mat’s temperature to a comfortable range, and the capability to keep both cold- and warm-blooded sleepers comfortable has easily made it something I can’t imagine sleeping without.
Is Ooler quiet?
Noise Levels There are three power levels that Ooler operates on, although each is considered quiet. These modes are Regular, Boost, and Silent. While Silent mode is not absent of noise, it is considered a reduced power mode and, thus, is quieter.
How cold does the Chilipad get?
With a temperature range extending from 55 to 115 degrees Fahrenheit, the Chilipad is useful not only for hot sleepers, but also for sleepers who prefer a warmer sleep surface. Couples can control each side individually, so that each person can sleep at the temperature they find most comfortable.
