Table of Contents
If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water. Another way you can drain the water is by turning off your washing machine and unplugging it from the outlet.
How do I force my LG top load washer to drain?
Force drain the unit by starting a cycle and pausing it. After 8 minutes the unit will automatically time out, display DR, and try to drain the unit.
How do I get my LG washer to drain and spin?
For LG front load washers, turn the unit on and without touching the selector dial move to the spin speed selection button. Then press the button until you see your desired spin speed highlighted. Then press the Start button. The unit will drain any excess of water before it spins.
Can I force my washer to drain?
If you are trying to drain a washing machine for moving or drain a washing machine for storage, powering it down will keep any electronic problems from popping up. To do this, you need to both switch the power button on the model off and unplug your washer from the outlet.
How do I manually drain water from my LG washing machine?
Press the POWER button to turn the washing machine off and remove the plug from the outlet. Locate the service panel on the bottom-left corner of the unit and open it. Unclip the drain hose and remove the plug from the drain hose to drain the water remaining inside the wash tub.
Why is LG washer not draining?
Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.
Why does my washer not spin or drain?
If your washer won’t drain or spin, the water level control may be faulty. Open the machine’s control panel and look for a plastic tube attached to the water level valve. If it’s clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.
Does Spin Cycle drain water?
What Does the Drain Function on a Washing Machine Do? It removes the water from the tub during the spin cycle. The washer pump forces water from the bottom of the machine into the drain hose. When the water reaches the bend in the hose, it goes out of the drain.
How do you manually drain a washing machine?
If not, follow these steps: Step 1: Turn off the power and lay down towels. Step 2: Locate the drain hose at the back of the washing machine. Step 3: Drain the water. Step 1: Turn off the power and lay down towels. Step 2: Locate the drain hose. Step 3: Drain the water. Step 4: Scrub the filter.
How do you position a washing machine drain hose?
In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.
How do I test my LG washing machine drain pump?
Test the drain pump. Press POWER to turn the washer ON. Press the SPIN SPEED key until HIGH is selected. Press the START/PAUSE button to start the SPIN ONLY cycle. Listen to hear a humming sound which indicates that the drain pump motor has started working.
Where is the drain hose on LG front-load washer?
Locate the access panel in the lower front of your front-load washer. Next, grab a shallow pan and have it ready by placing it near the access panel to collect the water. Open and remove the acces panel by pulling the tab downward and out, revealing the drain hose and drain pump filter.
Where is the drain pump on a LG front-load washer?
The pump on an LG machine is located in the front of the washer on the bottom left near the floor. The LG front-load washer has an accessible drain filter to help keep lint and objects out of the pump.
Where is the drain pump on a washing machine?
The drain pump is located at the bottom of your washing machine, but can be easily accessed in order to replace it if need be. If your washing machine is failing to drain during a wash cycle, it could be that there is a problem with the drain pump.
Why does water stay in washing machine drum?
The outer drum is stationary and contains the water, the inner drum rotates and holds the clothes for washing and spinning. The water doesn’t drain out the bottom because the regular drain pipe is above the top of the drum – the water will stay until the drain pump is turned on during the drain and spin cycles.
Why is my LG washer filling with water on spin only?
LG washers keep repeating the spin cycle when the water isn’t draining. This issue is often caused by broken sensors and other malfunctioning components. A hard reset can fix the problem, but you might need to buy a new sensor if it keeps happening.
