Table of Contents
Where is the drain on my Sundance hot tub?
Draining Your Sundance Hot Tub The drain is located at either the front of the side panel or behind the front panel. To operate, remove the drain cover, attach your garden hose and pull softly to open or simply attach your hose to the interior drain line to allow the water to flow out.
How do I get my hot tub to drain?
There are three methods for draining a hot tub: through the drain spigot (a.k.a. drain plug), using a submersible drain pump, or with the help of a wet/dry vacuum. Before you start draining the tub, however, cut off the power supply so the jets and pumps can’t accidentally be during this procedure.
How do you change the water in a Sundance spa?
How to Drain, Clean & Re-Fill Your Sundance Hot Tub Remove your hot tub’s filters. Remove your hot tub’s head rests. While the water is still hot, add 250ML (half a bottle) of Whirlpool Rinse. Turn your hot tub’s waterfall on. If your hot tub has Diverter Valves, turn them to the centre position.
How do you quick drain a hot tub?
How to Use It. All you need to do is put the devices wand into the water and shake it to prime. Then use the wand end to quickly vacuum sand from the bottom of your hot tub. Quick drain does not require electricity and no set up is required.
How do you get water out of the bottom of a hot tub?
Drop one end of a long vacuum hose into the spa, and connect the other end to the wet/dry vacuum. Turn it on for a few seconds – just long enough to let the hose prime and get the flow moving. Turn off the vacuum, and quickly disconnect the hose so the water can flow out onto the ground.
Where can I drain my hot tub UK?
Draining your hot tub is very quick and easy, you will need to use a garden hose and attach it to the bottom of the tub where there is a drain spout. You will need to make sure that it is attached firmly and tight to the Spigot, the water will then start to drain out of your hot tub once you have opened the Spigot.
How do you take care of a Sundance spa?
Quarterly Replace your MicroClean® filter. Replace your SunPurity™ cartridge. Every 3-6 months, depending on usage, drain and replace your water. Clean your hot tub cover. This is an often-overlooked part of spa maintenance, but it is essential in order to extend the cover’s life and keep it looking good as new.
How do you maintain a Sundance spa?
Part of the cleaning process is hot tub filter maintenance. Rinse the filter weekly, spray with a cleaner monthly, and soak the filter in a chemical cleaner every three or four months. Sundance Spas of Edmonton does provide hot tub services that take care of cleaning, we have a gold service and a platinum service.
How do you clean out a hot tub?
Clean the Spa Shell Spray your hot tub shell with hot tub cleaner, diluted white vinegar, or diluted bleach. Use a soft cloth or non-scratch nylon scrubber to remove residue. Rinse all the surfaces well, and drain all the rinse water to prevent foaming when you refill your spa.
How do you use a quick drain?
Simply insert, shake, vacuum and drain. No need to towel out debris. Comes fully assembled. Works without pumps or motors.
Can I drain my hot tub into a storm drain?
Do not discharge chlorinated water from your pool or hot tub into a storm drain.
Do you turn off hot tub to drain?
Draining and cleaning your hot tub does take time, but it’s a relatively easy process. Power off your hot tub before draining the water. To let the water out, you can drain the tub through the valve on the bottom of your spa. If your spa isn’t hooked up to a drainpipe, you can use a hose to drain the water.
Do you need to turn off hot tub before draining?
Step #2: Turn Off The Power Not only is it dangerous to work with this amount of water while connected to a power source, it is also bad for your hot tub if the system powers on while its empty. Turn it off and completely disconnect anything electrical before you start to drain the tub.
What happens if you drain a hot tub without turning it off?
Alternately, don’t drain it and leave it empty for extended periods. Water left in the pipes and equipment can grow bacteria biofilm, which is difficult to eradicate. Plus, without water, seals and gaskets become dry and begin to leak. Therefore, make sure to not leave your hot tub sitting empty.
Where should I discharge my hot tub water?
How To Drain a Hot Tub Follow the Pipe Flush process prior to draining. Turn the power to your hot tub off at the circuit breaker. Next, find your drain valve, usually situated at the bottom of the main panel on your hot tub but also sometimes on a corner. Attach your garden hose to the drain valve if necessary.
Is it safe to drain hot tub water on grass?
Spa water makes fine lawn water, as long as you open the cover and allow the chlorine or bromine level to drop to around 1 ppm. Your spa water should also be relatively well balanced, or at least the pH level should be below 7.8, and even 7.0 to 7.2 if possible, as most lawn grasses prefer a slightly acidic pH level.
Do Sundance spas use chlorine?
Your Sundance Spa is equipped with the ClearRay UV-C Water Purification System, so you are aiming to keep the Chlorine level at just 1ppm (light green on your test strip).
What does Flo mean on Sundance spa?
FLO. Stands for Flow Switch. Means that the flow switch is malfunctioning or the flow of water is being inhibited. The heater is deactivated and filter/circulation may be deactivated, also. Check for clogged filter and proper water levels in the hot tub.
