Table of Contents
How to Hydro Dip STEP 1: CLEAN. Using 91% isopropyl alcohol, cleaning cloths and gloves, ensure that the work piece is clean. STEP 3: BASE COAT. Apply the base coat. STEP 2: PRIME. STEP 4: Film placement. STEP 5: FILM hydration. STEP 6: Tape. STEP 7: ACTIVATE & WAIT. STEP 8: DIP.
What materials do you need to hydro dip?
Step-By-Step Guide to Hydro Dipping Large, deep plastic container (the container will have paint on the inside after the hydro dipping is complete) DIY complete hydrographic printing kit. Object to be dipped. Sandpaper to smooth the surface. Rags. Bucket of mild cleaning solution and water. Vinyl, rubber, or latex gloves.
Can I hydro dip at home?
While there are many companies specializing in hydro dip art for large items (e.g. cars and sports equipment), it’s possible to do the process on your own and be creative. Purchase a home hydro dip kit online to apply a design of your choice, with minimal equipment or experience.
What kind of paint do you use for hydro dipping?
You can hydro dip any item with a nonporous surface — all you need are a few simple supplies! Step 1 – Using your 2x Rust-Oleum Spray Paint prime the item that you are going to Hydro Dip. Allow that to dry.
Can you Hydro dip without spray paint?
However, you’ll need to be more careful using the spray can because spraying too close can form air bubbles on the surface, leading to undesirable patterns. People would often ask, can you hydro dip without spray paint? Yes, you can.
Do you need a base coat for hydro dipping?
Choosing the right base coat color is very important in hydro dipping. So if you are wanting the design to look as intended and usually shown on the product page of where you are purchasing the film, then using a white base coat is usually the best choice unless it is specified that another color was used in the photo.
How expensive is hydro dipping?
Average Costs for Hydro Dipping The average cost for hydro dipping a wheel for a vehicle is roughly $150, and that pricing can vary by as much as 20% – 50%, depending on the type of activator, finish, and labor costs. Hydro dipping fees for guns typically range from $200 to $500, depending on the make and model.
Does Hydro dip wear off?
Hydro dipping, also known as Immersion Printing, is a process of transferring colors and patterns onto various materials. The resulting look is 360-degrees of awesome. But does hydro dipping wear off? As long as the base paint remains stable, the hydrographics will remain intact.
Can u Hydro dip glass?
These hydro dip glass bottles are colorful and unique and the paint technique is easy. You will never get the same paint finish twice with hydro dipping. I have photos, a tutorial, and a video showing the process. Definitely watch the video because the technique is so much easier to follow.
Do You Use warm or cold water for hydro dipping?
The ideal water temperature range for hydrographic dipping is 80 to 90 degrees Fahrenheit. Some dip manufacturers may recommend a specific temperature, such as 80 degrees.
What is the activator for hydro dipping?
INK DRINK FILM ACTIVATOR. INK DRINK Hydrographic Film Activator is an easy to use film activator, compatible with most films on the market. Ink Drink maintains the richness and color vibrancy of your film and activates most films with a single pass (one coat).
What clear coat do you use for hydro dipping?
TWN’s clear coats are specifically designed for hydrographics. No matter your project or application, we have a clear coat with the unique characteristics that you need to create a long-lasting finish. CCI clear coats are the ultimate clear coat for sporting goods items.
What primer do you use for hydro dipping?
Any paint requires a good primer to stick to, and a clear coat to seal the paint in after and offer ultimate protection. Rust-Oleum Painter’s Touch Flat White Primer is the go-to for hydro dipping.
Is Krylon spray paint acrylic based?
Krylon Crystal Clear Acrylic spray paint provides a permanent, protective gloss coating that will not yellow with age.
Why is my hydro dip lumpy?
Too little activator and it won’t stick properly and become clumpy, too much activator and it can become too thin and not stick properly either. So just a single coat of activator from about a foot or so away seems to work fine.
Do you let the primer dry before hydro dipping?
Next in the hydro dipping process you want to apply the primer. Onto the next step in your hydro dipping project. Wait for 15 minutes at 20 degrees c for the part to be fully dry before moving on to the next step.
Do you sand before hydro dipping?
Prep Work: You still need to sand/scuff up (if needed or required) the item, prime it, apply a base coat and a clear coat to protect it. The only difference is that now you are adding one step after you apply your base coat and before applying your clear coat, and that’s the dipping process.
How long should paint dry before hydro dipping?
Most manufacturers of hydrographic dipping film recommend that you wait for a minimum of 20 minutes to eight hours after the painting step to do the dipping step. That’s because the paint needs to be a little soft in order for the hydrographic film to adhere to the item but hard enough to be handled.
How long does Hydrodipping last?
A typical lifespan for the hydrographic film adhered to an item is five to fifteen years. For many types of items that you’d want to hydro dip, this would cover its full lifespan. Items that aren’t handled much, such as a vase or figurine, may have a much longer lifespan.
How durable is hydro dipping?
When an item is hydro dipped, it might take 30-90 days for it to be fully cured, as durability increases. Contact with solvents or other chemicals can damage it during this time of curing. To ensure scratch resistance and durability, use a professional who knows the hydrographics printing process.
How much does it cost to get a deer skull Hydro dipped?
Hydro Dipped Deer Skulls $95.
