Table of Contents
A mousetrap car can be made from cardboard or balsa wood with CD’s for wheels and axles of wood or brass tubing. Power to drive the wheels is provided by a mousetrap to which a wand and string is attached to the snap arm.
How does the mousetrap car work?
The basics The mousetrap storespotential energyin the form of the spring. That potential energy is converted into kinetic energy in the form of the arm rotating forward. The arm pulls on the wound-up string, which turns the drive wheel dowel, which is connected to the wheels, which makes the car drive forward.
What materials do you need to build a mousetrap car?
What You Need: Wooden snap-back mousetrap. Duct tape. 4 eye hooks. Wooden dowel that fits inside the eye hooks. Heavy cardboard. Large and small rubber bands. Foam board (usually found at a craft store) String.
How do you set a mousetrap on a mousetrap car?
For optimal performance the mouse trap should be positioned on the chassis so that the tip of the lever arm falls directly above the drive axle when the mouse trap is in the fully wound position (as pictured bellow). If the mouse trap is not aligned properly with the drive axle energy will be wasted off the start.
How do you make a fast mousetrap car?
Making The Vehicle Faster Thicken the axle: Wrapping some tape radially around the axle or adding a spool. It may be surprising as to how much faster this makes the vehicle. Use smaller wheels. They will require less force to complete a rotation. Make the vehicle lighter.
How long should a mousetrap car be?
The ideal size for an ultra big wheel on a long distance mousetrap racer seams to be somewhere between 10 and 15 inches. And the ideal size for a drive wheel on a speed-trap racer seams to be between 2 and 3 inches but no more than 4 inches.
How long should the lever arm be on a mousetrap car for distance?
For maximum speed, position the mousetrap 2 1/4 inches from the drive axle and cut the lever arm to a length of 4 1/4 inches. The lever arm can be cut using a dremel tool or by using a fine tooth hobby saw. The lever arm should always be “just” long enough to reach the drive axle or performance will be compromised.
Should a mousetrap car be heavy or light?
Above all, your car should be light. The smaller the mass of your car, the better — every gram or milligram you can shave off of your car’s frame is a little further your mousetrap will be able to push your car.
What is the fastest mousetrap car?
The Speed-Trap Racer is the fastest mousetrap powered racer anywhere and was designed after Doc Fizzix’s own record-setting mousetrap racer that traveled 5 meters in 1.2 seconds.
What is an axle hook on a mousetrap car?
An important part of a mousetrap vehicles propulsion system is the axle hook. If the string does not properly release from the drive axle the string will rewind around the drive axle and cause the mousetrap car to come to an instant stop.
What is the best mousetrap?
The best mouse traps of 2021 Best for your budget: Victor metal pedal mouse trap. Best classic mouse trap: Authenzo SX-5006. Best electric: Abco Tech electronic humane rodent zapper. Best humane mouse trap: Authenzo Humane Mouse Trap. Best overall: Intruder 30442 The Better Mousetrap, 6-Pack.
What kind of string do you use for a mousetrap car?
The string has to be strong enough to handle the pulling force but flexible and thin enough to wind tightly around the drive axle. We recommend using a Kevlar based fishing line because its high strength. You should stay away from nylon fishing line and dental floss, these do not work well with mousetrap racers.
Why is my mousetrap car not going straight?
If your mousetrap car does not travel straight energy is also being wasted to over come the force of friction turning the vehicle’s wheels. If a mousetrap vehicle is not traveling straight then there is one reason and one reason only: the front and rear axles are not parallel to one another!Jan 21, 2012.
What is gravity vehicle?
Gravity Vehicle is an event that returned for the 2020 and 2021 competition seasons after being held in 2012 and 2013. In this event, competitors design and build a ramp and a vehicle that is powered solely by the vehicle’s gravitational potential energy.
What can you use for wheels on a mousetrap car?
As you might guess, the materials used to build mousetrap-powered cars are light out of necessity. Foamcore board or balsa wood are often used for the body. The wheels can be off-the-shelf radio-controlled car wheels, but many builders use blank CDs or DVDs because their thin edges reduce friction.
Why is it better to have large wheels for the drive axle on a mousetrap car?
Larger drive wheels will have a greater travel distance per each turn compared to smaller drive wheel. The smaller the diameter of the drive axle in comparison to the diameter of the drive wheel the more force that will be required to accelerate the vehicle but the greater the distance of travel per rotation.
How do you make a rat trap car go far?
Mousetrap cars will go farther if the spring has more distance from the back wheels. Create traction on the wheels. Add rubber bands, or tape around the wheels to give them better traction. The better the wheels can grip the floor, the farther the mousetrap car will go.
How far did the world record mousetrap car go?
Description: The secret to Doc Fizzix’s world record setting mousetrap distance racer that traveled over 182 meters was it’s unique pulley system. This is the same pulley set-up that was used on Doc Fizzix’s world record setting mousetrap distance car.
What simple machines are in a mousetrap car?
Six Simple Machines Inclined plane • Wedge • Screw • Lever • Wheel and axle • Pulley Your mousetrap vehicle will have a number of moving parts making it a type of machine.
Should the string be tied to the axle Why or why not?
The string must not be tied to the axle. If the string is tied to the axle, it will begin to rewind itself and will cause your car to come to a sudden stop. In order to achieve maximum performance from your mouse-trap car, it is important that the pulling string does not slip off the drive axle prematurely.
Do snap mouse traps work?
Traditionally, snap traps have been popular for killing mice and rats swiftly. If you’re trying to bring down the population of house mice and deer mice in your area, snap traps can work especially well. When used correctly, the quick trigger system of a snap tap can help manage large infestations.
