Table of Contents
How do you make a window valance?
Attach hook and loop tape (smooth side) to the front and ends of the 2×4. Secure with a staple gun. Install angle brackets on each side of the window frame, flush with the top. Place 2×4 on top of brackets, attaching with screws. Measure from top of window frame down to where you want the valance to hang.
Can you make a valance?
You can easily sew your own valance with some basic sewing materials and a little sewing knowledge. You will also need a sewing machine to sew a valance. Try making your own valance for a unique window treatment in any room of your home.
How much fabric do I need for a valance?
The obvious answer is that it depends, but you should expect to need somewhere between 1-1/2 to 5 yards of face fabric for a standard 36- to 40-inch window. For double-wide windows (about 70 to 80 inches wide), about 2-1/2 to 8 yards of face fabric is a realistic estimate.
How do you make a valance out of cardboard?
What are the dimensions of a valance?
The length of the valance should be 1/4 the window height plus one inch. Using these measurements, cut a rectangle from your fabric and lining.
What is the average length of a window valance?
It depends on the style of the valance, as well as how it’s installed and how high the ceiling is. Outside-mounted valances usually have an average drop length of 17 to 21 inches if hung on walls with 8-foot ceilings, and that length gets proportionately longer as the ceiling gets taller.
How wide should a valance be for a 36 inch window?
To determine the width of a valance for a 36-inch window, the Window Treatment Expert website suggests adding 2 to 4 inches on each side, adding less for narrower windows and more for wider windows. For a 36-inch window, this measurement would provide you with a valance that has a width of 40 to 44 inches.
Can you put a valance over blinds?
These can be installed above any window treatments, blinds, shades or drapes. A valance is a length of decorative drapery over the top of the window. They often help to hide hardware like drapery rods, hooks, etc. There are several valance styles to choose from for your windows.
How much of a window should a valance cover?
For most windows, a valance should cover about 2 to 6 inches of the top of the window and window frame (this is called the window overlap), with the rest of the valance covering the wall above the window. If there is not enough room to do this, then the valance should be hung immediately under the ceiling.
How wide should a valance be for a 48 inch window?
Another rule of thumb used by decorators is that the window valance depth should be 1/4 of the overall window height, plus 1 inch. A 60-inch tall window, then, would call for a 16-inch deep valance, while a 48-inch window calls for a valance about 13 inches deep.
How do you calculate yardage for a box pleat valance?
Decide how far apart you want each pleat in inches and divide your base width by this number to find how many pleats you’ll be making. Multiply the number of pleats the valance will have by 5 inches and add this sum to the base width of your window or rod.
What kind of batting do you use for cornice?
Cover the cornice with batting: I recommend using batting that is 3/4″ to 1″ thick. It may look too poufy to you, but it will be mashed down a little once the fabric is applied.
What’s the difference between a valance and a cornice?
Curtain Valance vs. The primary difference between a curtain valance and a cornice is that valances are made out of drapery or fabric, while cornices are typically made out of wood. Valances also add a softer accent to a room.
What type of wood is used for cornice boards?
The commonly used wood for making cornice boards are MDF or plywood.
How do you make an upholstered cornice board?
What To Do: Build cornice frame. Cut lumber slightly larger than the width of your window. Cover frame with batting. Cut batting to double the width of board and exact length. Repeat with fabric. Spray batting with glue and wrap fabric around frame tightly. Hang over window.
What is the average height of a valance?
Just keep in mind that valances are normally 15-25 inches (38-63cm) high and placing the valance higher may allow the top part of the window casing to show underneath the valance when the drapery panels are opened. 3. If you like a puddled drapery bottom, add 4 inches (10cm) to the total of the height measurements.
How wide should a valance be for a 40 inch window?
Our example window is 40 inches wide, including the window frame. That means that the valance should cover a total width of about 42 to 44 inches once gathered.
How do you calculate yardage for a valance?
Divide the cut fabric width by the width of the chosen fabric for the number of widths required. Multiply that number by the cut fabric length. Divide the result by 36 for the number of yards of fabric required for a self-lined gathered valance.
How long should a box pleat valance be?
Most likely your valance will be long enough to come into the window {it should be: at least 2″-3″ minimum} so you’ll want the fabric lined when the light shines through the window. Anything with a good amount of polyester will work fine.
How wide should a window scarf be?
A standard window scarf is 50 inches wide by 216 inches long. Take into account the length to which you would like your scarves to hang over your curtains or windows. A standard window scarf is 50 inches wide by 216 inches long.
How wide should a window cornice be?
The width of the cornice box depends on the width of the window; typically your cornice box should be 1 to 2 inches wider than either the window or the curtain rod.
