Table of Contents
How much does it cost to add a tanning ledge?
The cost to buy a separate fiberglass tanning ledge can be between $5,000 and $15,000, depending on if it’s elevated. If you’re looking to save money, your best option might be to choose a model with the ledge built-in.
How deep should a pool tanning ledge be?
How deep is a tanning ledge? The depth of most tanning ledges is approximately nine inches, meaning that the ledge itself is no more than 12 inches deep. At this water level, many activities that are less possible at deeper depths become enjoyable, and the pool becomes a place where more people are able to relax.
How deep should my Baja shelf be?
A baja shelf is large and shallow. It’s often the same depth (about 3 – 6 inch water depth) as the first step of a pool, but some can have an even deeper entry step after stepping in from the first step of the pool.
How long should a tanning ledge be?
Tanning ledges are in the shallow area on one side of your pool. Tanning ledges can be built in all sorts of sizes depending on what you want, the typical measurements for a tanning ledge are at least five feet in length and ten feet wide, and 6 to 18 inches in deep in water.
Can you add a tanning ledge to an existing concrete pool?
That beloved swimming pool from 1994 may need a new fresh look. A tanning shelf or tanning ledge is the perfect feature to add to an existing swimming pool while under renovation. A tanning shelf is an area inside the pool perimeter that sits just about 6-8″ below water.
Can you add a sun shelf to existing liner pool?
A Baja shelf on a swimming pool delivers a big win for both relaxation and convenience. And for existing pool owners, the good news is that you can add this handy, attractive feature during a major pool renovation.
How deep should a pool shelf be?
This might seem kind of low to you, but there are three key reasons why 9 to 12 inches is the best depth range: Most furniture will float in water that is more than 9 inches deep.
How deep should a pool bench be?
One popular set of dimensions is shallow ends of 3.5-feet, with a 5-foot-deep middle. Another common choice is 3.5 feet to 5.5 feet to 4 feet deep. Based on your pool’s shape and size, coupled with your family needs and lifestyle, your builder will advise the best approach for depths.
How deep should a wet deck be?
Lowered portions of wet deck shall be at least 10 inches (254 mm) but not more than 36 inches (914 mm) below the pool water level. Lowered portions of wet deck shall be not more than 60 feet (18 288 mm) long and shall adjoin the rest of the wet deck via stairs or ramps at both ends.
What is a cabo shelf?
A tanning shelf is also known as the sun shelf, Baja shelf, or a Cabo shelf. It is a shallow section of the pool where the kids can play and the adults can stand. It’s a shelf that allows you to dip your feet into the water.
How long should a sun shelf be?
Typically big enough to fit at least a couple of lounge chairs and an umbrella, their size may range from 5 feet 6 inches by 12 feet to 8 feet 10 inches by 18 feet 1 inch. Their depth is usually between 6 and 12 inches, with 10 inches being an especially popular depth.
How wide is a ledge lounger?
71 x 23 x 24.5 inches Product Dimensions 71 x 23 x 24.5 inches Manufacturer Ledge Lounger ASIN B073V9R1GG Item model number LLC Customer Reviews 4.7 out of 5 stars 82 ratings 4.7 out of 5 stars.
Are tanning ledges worth it?
We can confirm that kids of all ages enjoy using tanning ledges. Most parents love them because they provide babies and toddlers with a safe space to join the family in the pool. Older kids often like to use the tanning ledge to rest between racing and playing games.
Can you add onto an existing inground pool?
In short the answer is yes, usually only if the swimming pool is a concrete structure. Changing the shape of a swimming pool can be very challenging, concrete steps & seats or ledges can easily be added. If a swimming pool is too deep then the pool floor can be raised to reduce the depth.
Can you add to an existing pool?
Add onto Existing: In most cases it’s possible to be hot-tub ready by building a new spa right into the swimming pool remodeling and adding the required plumbing / equipment. This can be a little more costly than when building it new but it happens all the time!.
Can you add a spa to an existing pool?
The existing pool may be altered to add a spa within the main pool body itself, or perhaps you can extend the pool to incorporate the area. The other alternative if you do not wish to touch the existing pool shell itself, is by installing a separate spa unit directly adjacent to your pool.
Can you put a fiberglass tanning ledge on a vinyl pool?
A tanning ledge is a versatile and attractive addition to any vinyl or fiberglass pool. Use your tanning ledge as a space for sunbathing, sipping on summertime cocktails, or splashing in the shallows with your little ones.
What is a sun shelf in a pool?
It’s a long, flat ledge just below the surface of the water, usually in the shallow end overlooking deeper waters. It allows swimmers to enjoy the cool water while still laying out in the sun, and many people enjoy relaxing on sun shelves for long periods of time!Jul 17, 2019.
What is Baja shelf pool?
The Baja shelf is a term for an extended top step into a pool, which becomes, essentially a de-facto shallow pool inside your bigger pool. Instead of having to lug the kids around the deep end with you, they can perch on the shelf and splash and play to their hearts content while you get your laps in—just feet away.
What is the normal height of a pool step?
Standard step height is 12 inches. However, most people are accustomed to a much lower step, leading many industry experts to recommend heights between 8 and 10 inches.
What is a swim out bench?
This feature is a combination of an upper seat and lower bench that offers the Swimmer the ability to enter or exit the pool or just rest and relax safely in the deep end.
What are the seats in a pool called?
A sun lounger is a chair-like device, typically placed in a patio, garden, or swimming pool deck, or used as beach-side outdoor furniture. They are often constructed from wood, formed plastic, or metal and outdoor fabrics.
