Table of Contents
How do I make my bookshelf higher?
A simple addition can make your bookshelf taller. Measure the size of the existing bookshelf so you know what size boards you need. Measure two boards out to the length you want to expand your bookshelf. Measure one board to fit across the top of the bookshelf. Cut any shelves you want to add to the bookshelf.
How do you stabilize a tall bookshelf?
Drill a hole for each foot in the underside of one of the legs and tap in the foot, using a hammer. Right the bookshelf and put it back into position. Raise or lower each foot until the bookcase stops wobbling. Raise the feet by turning them clockwise; lower them by turning them counterclockwise.
How do you upgrade an old bookcase?
Here are 9 easy ways that you can transform the back of an existing bookcase to create a custom look. Paint. A little paint can go a long way in terms of changing the look of a bookcase! Wallpaper. Grasscloth. Burlap. Beadboard. Fabric. Stencils. Chalkboard.
How can I make a cheap bookcase look better?
Add Molding to Make It Look More Expensive Thus, you can make a cheap bookcase look more expensive by adding molding—even if it starts as an everyday laminate piece. Kate from Centsational Girl made a pair of IKEA Billy bookcases unrecognizable by installing base and crown molding.
How do you make a plywood bookcase?
Step 1: Cut Down One Plywood Sheet for Bookshelf Carcass. Step 2: Assemble Bookshelf Carcass. Step 3: Fill Pocket Holes in Plywood Bookshelf Carcass. Step 4: Build Bookshelf Base and Attach. Step 5: Add Back to Plywood Bookshelf. Step 6: Add Adjustable Shelves to One Sheet Plywood Bookshelf.
How do you keep a bookshelf from falling down?
Fasten a furniture strap to the wall and the bookcase to keep it from tipping over. The straps cost about $6 at Target and hardware stores. Or, fasten the bookcase to the wall by driving 3-in. screws through the back of the bookcase (at obscure locations) into studs (be sure you hit studs).
How do you brace a bookcase?
Stand a level on the side of the bookcase. If the level shows that the bookcase is leaning to one side, tap on the side of the bookcase with a rubber mallet until the bookcase is level. If it won’t stay in place, tighten the screws slightly and tap on the case until it stays level.
How do you reinforce a bookcase?
For an existing bookcase, you can strengthen the shelves either by adding small panels to the interior sides of the bookcase to serve as dadoes or by securing narrow strips of wood, called cleats, below each shelving board.
How thick should bookshelves be?
Typically, bookshelves are 11 to 12 inches deep, but if you are building your own bookshelves, this is your opportunity to customize your shelves to fit your books. If you have a lot of oversized books, measure the largest one, and add 1 to 2 inches to the depth.3 days ago.
How do you modernize a traditional bookcase?
Whether you want to upgrade a standalone bookcase or need to modernize built-in bookshelves, the easiest way to update it is with paint.Ideas for Painting Bookshelves 1 | Paint It A Pretty Color. 2 | Paint the Inside A Different Color. 3 | Create a Rainbow. 4 | Add Some Stripes. 5 | Use A Paint Treatment.
How do you make a bookshelf look good?
I’ve got three great tips for making your bookshelf look a little more styled. Vary Horizontal and Vertical Stacking. I like to start by dividing up all my books by size. Add Color to The Back of Your Bookshelf. This is a great way to make your bookshelf look more harmonious. Display Books by Size and Use Bookends.
How do you refinish a laminate bookcase?
Ensure you apply the primer in one direction for even coverage. Allow the primer to dry for 45 minutes before applying a second coat of primer. Let the primer cure for at least three days before applying paint to the laminate bookshelves. Sand the bookshelves’ surface lightly with 220-grit sandpaper.
How do you style an open bookcase?
How To Style Your Bookshelves Like A Pro Start with books, mixing vertical rows with horizontal stacks. Choose sculptural forms that will stand out against the background of the shelves. Layer in artwork and/or framed photos. Place smaller objects atop of stacks of books, or to fill in where needed.
How thick should plywood be for shelves?
The most common size used in shelving is a 3/4 inch thickness. Cabinetry, furniture, and smaller decorative projects might generally use a combination of 1/2 and 3/4 and occasionally 1/4 inch.
How much does it cost to add built in bookshelves?
The cost to have built-in bookshelves installed averages $2,677 or between $1,273 and $4,091 for a carpenter to do the job. If you buy the materials yourself, you can usually get a handyman to install them for $30 to $130 per hour. For high end custom work, expect to spend $150 to $1,200 per linear foot.
How much does it cost to build a shelf?
Custom Bookshelf Cost by Material Material Price per Linear Foot (Installed) Metal $450 – $800 Metal and Wood $450 – $1,000 Wood $500 – $1,000 Glass $750 – $1,200.
How do you stabilize a bookshelf without drilling?
To avoid using studs, screws or making holes in the wall to hold down a hook or bracket, go for adhesive tapes. You can use these to hang any hollow and lightweight bookshelf, particularly the ones that are made of wood. As a general rule, only hang bookshelves that weigh no more than 4 kilograms.
Do bookshelves need to be anchored?
Bookshelves can pose a hazard in your home if they are not securely anchored. They can topple during an earthquake or by playful pets and curious toddlers who like to climb. The result can be disastrous, causing injury to anyone standing adjacent to the shelves.
How do you secure a bookcase to the ceiling?
To lock the bookcases into position, screw the top to the ceiling joists with 3-in. drywall screws, making sure the backs of the standards are against the wall. Use at least six screws to secure the top directly to the joists (two screws at each location). You can now remove the temporary stringers.
