Table of Contents
Can I make eyelet curtains?
To make your own, pick out some curtain fabric as well as eyelet tape, which is is a strip of fabric containing evenly-spaced eyelet holes. Once you’ve measured out the size of your curtain panels, stitch on the eyelet tape and cut holes in the fabric where each eyelet will go.
How much material do I need to make eyelet curtains?
For eyelet curtains you need between 1.5 times fullness (adequate) and 2.25 times fullness (maximum). You will need to make sure you have an even number of eyelets on your finished curtains.
How do you hang eyelet curtains without a pole?
How to Hang Your Curtains Without Using a Rod 1 – Hooks. There are a number of hooks you can use to hang your curtains. 2 – Drawer Pulls. 3 – Rope. 4 – Tree Branches. 5 – Sports Equipment. 6 – Nails. 7 – Copper Pipes. 8 – Upholstery Tacks.
How do I calculate how much material I need for curtains?
There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).
How do I calculate how much fabric I need for curtains?
A simple rule of thumb is that a curtain is one and a half to two times the width of the area it is meant to cover. A heavier fabric will provide fullness that a lightweight fabric can not. The lighter the weight of the fabric, the more fullness it will require.
How do you measure the width of eyelet curtains?
Simply measure between the finials (the decorative ends) to obtain the width. Drop: The inner edge of the eyelet is set down 3cm from the top of the curtain so you need to allow for this when measuring or your curtains will be 3 cm too short!.
Do eyelet curtains need to be double width?
Buying the Correct Size Measuring for ready made eyelet curtains is very simple. Double the width to determine the total curtain width you need for your window. If you are using just one curtain and pulling it to one side, then the total width of this one curtain should be close to the number you just calculated.
What is the difference between a grommet and an eyelet?
An eyelet is a small piece of metal that is used to reinforce a hole in a piece of fabric; usually made of brass. Grommets are very similar to eyelets, because they are used to reinforce a hole as well; however, grommets are typically used for more heavy duty material than eyelets.
How do you set eyelets without a tool?
Add a layer of fusible interfacing to thin fabric before placing an eyelet in it. You may be able to set a small eyelet by placing the eyelet in fabric between the jaws of a handheld die punch. The back of the eyelet should rest against the die of the hole punch. Squeeze gently but firmly to fold it on itself.
What can I use instead of a curtain rod?
Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.
Can I hang eyelet curtains on a track?
You can’t use eyelet curtains or tab top curtains with a curtain track. They also allow a wider range of curtain styles to be hung, including eyelet, tab top and pencil pleat.
Can you hang curtains with Command hooks?
Hanging lightweight curtains is as easy as 1-2-3 with Command™ Medium Brushed Nickel Metal Hooks which hold up to 1kg. 1. Place your Command™ hooks on each side of the window. Lay the curtain rod across the hooks for a sleek, modern and damage-free window hanging.
Do you need a tool to install grommets?
The actual grommet installation “tools” can consist of a single grommet plier, or a combination of a setter and anvil. Grommet Pliers are normally used for small grommets and eyelets. For larger grommets, as we mentioned above, you use a setter and anvil to exactly match the size of the grommet.
What is the proper placement of curtain rods?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
Do curtain rods need to be hang on studs?
Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts. TIP: If you could have a stud in your wall, use a 1/8″ drill bit to check first.
How do I calculate how much fabric I need?
Figure out how much fabric you need with this formula: Width of fabric divided by width of one piece equals the number of pieces that fit into width (rounded down to the whole number). Total number of pieces divided by number of pieces that fit into width equals number of rows you need.
How wide should curtains be for a 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How many yards of fabric do I need calculator?
Dimensions that fit into the width of the fabric Take the total length you need and divide by 36 to calculate how many yards you need. Most of our fabric is sold in full yard increments, so round up to the nearest yard.
What is 90 by 90 in CM for curtains?
Iliana Curtain Panel Pair Size: 90 inches (229 cm) Width x 72 inches (183 cm Drop): Praline.
